Boral 4210625 Specification

Brand
Boral
Model
4210625
Type
Specification
Build something great
™
The beauty of stone,
the simplicity of siding.
COMPLETE SYSTEM BROCHURE
1
From new construction to remodeling, exterior façades to stunning interiors, Boral Versetta
Stone
®
adds the beautiful detail of traditional stone masonry with a modern installation method,
offering a complete system founded on quality, speed and selection.
What is Boral Versetta Stone
®
?
Boral Versetta Stone
®
is a mortarless, cement-based
manufactured stone veneer with a unique, panelized design
that is installed with mechanical fasteners, allowing carpenters
and contractors to recreate the beauty and craftsmanship of
authentic stone masonry using nails or screws.
Why choose Boral Versetta Stone
®
?
Quality
System Speed Selection
2
3
A reputation for quality,
performance and innovation
For over 50 years, Cultured Stone
®
by Boral
®
has worked to build a reputation for quality,
authenticity and design by consistently improving and perfecting the production process for
manufactured stone veneer, becoming the most recognized brand in the industry. By combining
lightweight concrete, basic aggregate, water, and mineral oxide pigments, the master craftsmen
of Cultured Stone
®
not only mimic the look of natural stone, but also improve upon it with
more consistent color, quality and weight. From this knowledge, expertise and dedication
to innovation comes Boral Versetta Stone
®
– a new, mortarless stone veneer with a modern
installation method.
Quality
2 ft
2
Per
Panel
50-year
Transferable
Warranty
110 MPH
Wind
Resistance
†
• Tested and approved to rigorous
building code standards
†
• Class A Fire Rating
†
• Resistant to freezes, thaws, normal
winds and heat
†
• NAHB Green Approved Product
• Minimum of 50% recycled content
as validated by UL Environment
™
• ICC Evaluation Service Report ESR-2859
Performance
†
See Boral Versetta Stone
®
Product Data Sheet for proprietary test results, located at www.BoralAmerica.com/stone.
4
From start to finish, the complete
system for your next project
System
FLAT PANEL
The main component of the Boral Versetta Stone
®
system, the Flat panel covers two square feet and
weighs approximately 17 lbs. Each panel is embedded
with a G-90 galvanized nail strip that allow for easy
installation with mechanical fasteners. The built-in
rain screen and other moisture management features
allows for proper water drainage.
UNIVERSAL CORNER
The Universal Corner panels are the same size
and shape as Flat panels but have finished ends.
Universal Corner panels fit neatly with Flat panels
and are designed for use on end wall terminations
and for inside and outside corners.
ITEM COLOR
Wainscot Cap/Sill Taupe
Charcoal
Trim Stones Taupe
Charcoal
Receptacle Box Taupe
Light Box Taupe
ACCESSORIES
1
1
3
4
2
6
5
3 4
5 6
2
Universal Corner
J-Channel Starter Strip
Flat Panel
Wainscot Cap
Receptacle Box Trim Stone
Light Box
THE VERSETTA STONE
®
SYSTEM
5
• Installs with screws or nails
• No metal lath or scratch coat necessary to install
• Panels interlock with tongue & groove system
• Built-in rain screen
• Pre-drilled weep holes allow water to escape
• No seasonal restrictions on installation
Speed
For step-by-step instructions, or to access tips and tricks
for making installing Boral Versetta Stone
®
even simpler,
watch our installation videos at www.VersettaStone.com
SPEED
THE VERSETTA STONE
®
PANEL
Mortarless panels are designed for a quick and easy installation using mechanical fasteners.
access
tips
and
®
even
www.VersettaStone.com
Installs with speed using
screws or nails
†
For material produced prior to October 1, 2015, the rain screen may measure 3/16” but is fully compatible with products produced after that date.
6
Comprehensive color and texture
selection based on today’s trends
Selection
• Installs with screws or nails
• No metal lath or scratch coat necessary to install
• Panels interlock with tongue & groove system
• Built-in rain screen
• Pre-drilled weep holes allow water to escape
• No seasonal restrictions on installation
Plum Creek
Terra Rosa
Sterling
Mission Point
Graphite
The rugged texture and
purposeful irregularity offer
an exposed and well-worn
look that suggests years in
the elements.
LEDGESTONE
Sterling
Mission Point
Graphite
Terra Rosa
Plum Creek
The traditional look of
quarried limestone fitted
tightly together to emulate
rural 19th century American
architecture.
TIGHT-CUT
Build something great
™
Explore the product range online
www.BoralAmerica.com
Visit
www.VersettaStone.com
for more information,
and to find a dealer
near you.
BRICK
STONE
SIDING
TRIM
ROOFING
The product colors you see are as accurate as current photography and printing techniques allow.
We suggest you look at product samples before you select colors.
Pub. No. 10012480-E Rev. 9/15 © 2015 Boral Stone Products LLC
www.VersettaStone.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Boral 4210625 Specification

Brand
Boral
Model
4210625
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents