2. CSH
  3. 39.3300.21

CSH 39.3300.21, 39.3300.12, 39.3300.15, 39.3300.18 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the CSH 39.3300.21 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTION MANUAL
for installing
39.3300 Series
UNDERMOUNT SLIDE
TM
2
Tools and Hardware Recommended:
Hardware Included:
Kreg jig and clamp
Locking Devices
Slides
Back sockets
Drill or screwdriver
Screws
3
STEP 2) — Build Drawer Box (If Necessarry)
STEP 3)
STEP 1) — Choose Drawer Slide Length
Determine the drawer slide length you will need.
Typically, a 24" base cabinet will use a 21" drawer
slide, a 21" vanity will use an 18" drawer slide,
and a drawer in miscellaneous furniture (bedroom,
dining room, etc.) will use a 15" drawer slide.
Measure depth and width of box.

Building the Drawer Box
If necessary, cut notches for the slides, into the

Minimum/Maximum Cabinet Depth
Drawer box length Min-Max cabinet depth with
metal rear attachment
229 mm 9" 250–300 mm 
305 mm 12" 326–376 mm 
381 mm 15" 402–452 mm 
457 mm 18" 478–528 mm 
533 mm 21" 654–604 mm 
4
STEP 6a) —Face Frame
STEP 5)
STEP 4)



the bottom front of the drawer box. Screw them
into place. Avoid screwing the devices into the

puncturing the drawer.
We recommend that you use a jig (such as a Kreg

square and level. If you don’t have one, however,
-
ing. Screw the slide to the face frame first, setting

(to allow room for the drawer to close). Next, after


Installing the Slides
5
STEP 6b) — Frameless
STEP 7)
STEP 8)
Place the drawer on thew rails, paying attention

drawer.


If you need more information or help installing your drawer slides,
please give us a call at 262-375-7960
Frameless: For a frameless cabinet, simply screw
the slide into the side of the cabinet, also setting it



Note: image depicts a face frame cabinet that has been modified
to demonstrate frameless installation.
TM
/