2. Toro
  3. HD Shock and Spring Kit, TimeCutter HD Riding Mower

Toro HD Shock and Spring Kit, TimeCutter HD Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro HD Shock and Spring Kit, TimeCutter HD Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3414-890RevA
HDShockandSpringKit
TimeCutter
®
HDRidingMower
ModelNo.137-2042
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
tocausecancer,birthdefects,orreproductiveharm.
Installation
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Engagetheparkingbrake.
4.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKposition.
5.Shutofftheengineandremovethekey.
RemovingtheExistingRear
Springs
1.Removethecamlocknut(1/2inch)securingthe
topoftheexistingrearspring(Figure1).
Retainthecamlocknut(1/2inch).
2.Removetheangenut(3/8inch)securingthe
bottomoftheexistingrearspring(Figure1).
Retaintheangenut(3/8inch).
3.Removetheexistingrearspring(Figure1).
4.Repeatthisprocedureontheotherside.
g209520
Figure1
1.Camlocknut(1/2inch)3.Cam-lockleverinthe
lockedposition
2.Rearspring
4.Flangenut(3/8inch)
InstallingtheNewRear
Heavy-DutySprings
1.Installthenewrearspringusingthepreviously
removedcamlocknut(1/2inch)andangenut
(3/8inch)asshowninFigure1.
2.Withthecam-lockleverinthelockedposition,
torquethecamlocknut(1/2inch)to15to16
N∙m(135to145in-lb).
3.Repeatthisprocedureontheotherside.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3414-890*A
RemovingtheExisting
FrontSpring
1.Removethe2wheelboltsand2angenuts(3/8
inch)securingtheexistingfrontspring(Figure
2).
Retainthe2wheelboltsand2angenuts(3/8
inch).
2.Removetheexistingfrontspring(Figure2).
g209519
Figure2
Topofthefrontspringshown
1.Frontspring3.Wheelbolt
2.Flangenut(3/8inch)
InstallingtheNewFront
Heavy-DutySpring
Installthenewfrontspringusingthepreviously
removed2wheelboltsand2angenuts(3/8inch)as
showninFigure2.
2
/