Toro Counterweight, Dingo Compact Utility Loader Installation guide

Toro
Brand
Toro
Model
Counterweight, Dingo Compact Utility Loader
Type
Installation guide

This manual is also suitable for


The T
oro Company – 1999
Printed in USA
All Rights Reserved
FORM NO. 3322-722
INSTALLATION
INSTRUCTIONS
Models 22417 and 22715
Counterweight
for Dingo Traction Units
Loose
Parts
DESCRIPTION QTY. USE
Counterweight
Pin
Lynch
pin (not available with all counterweights)
1
1
1
Install on traction unit
Installing
the Counterweight
1. Slide the counterweight onto the operator
platform (Fig. 1).
Note: The counterweight for diesel traction
units with the battery mounted on the
operator platform differs from Figure 1
in that it has a cutout area that fits
around the battery.
2. Secure the counterweight with the pin and lynch
pin (Fig. 1).
m–3969
1
3
2
4
Figure 1
1. Operator
platform
2. Counterweight
3. Pin
4. L
ynch pin
Note: When using the counterweight, the
rated lift capacity of the traction unit
increases by about 110 lbs.
Removing
the Counterweight
1. Remove the pin from the back of the
counterweight and slide it off of the platform.
2. Store the counterweight in a clean dry area, and
cover it to keep it clean.
Using
the Counterweight
The counterweight can be used any time you will be
carrying a heavy load or attachment with the traction
unit. Several attachments are heavy enough that they
require the use of the counterweight. Refer to the
attachment operator’s manual for recommendations
on using the counterweight.
  • Page 1 1

Toro Counterweight, Dingo Compact Utility Loader Installation guide

Toro
Brand
Toro
Model
Counterweight, Dingo Compact Utility Loader
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents