Toro Vibratory Plow, Compact Utility Loaders User manual

Category
Mini tillers
Type
User manual

This manual is also suitable for

Toro Vibratory Plow, Compact Utility Loaders is a powerful attachment designed for use with Toro compact utility loaders to pull flexible pipe and cable into and through soil. It is ideal for routing irrigation and utility lines underground without having to dig a trench for the entire length of the pipe or cable. The vibratory plow features a variety of optional blades and pullers to accommodate different soil conditions and job requirements. It also has a gauge rod assembly and coulter to help ensure accurate plow depth and smooth operation.

Toro Vibratory Plow, Compact Utility Loaders is a powerful attachment designed for use with Toro compact utility loaders to pull flexible pipe and cable into and through soil. It is ideal for routing irrigation and utility lines underground without having to dig a trench for the entire length of the pipe or cable. The vibratory plow features a variety of optional blades and pullers to accommodate different soil conditions and job requirements. It also has a gauge rod assembly and coulter to help ensure accurate plow depth and smooth operation.

FormNo.3364-936RevA
VibratoryPlow
CompactUtilityLoaders
ModelNo.22911—SerialNo.310000001andUp
ToregisteryourproductordownloadanOperator'sManualorPartsCatalogatnocharge,gotowww.T oro.com.OriginalInstructions(EN)
ThisproductcomplieswithallrelevantEuropean
directives,fordetailspleaseseetheseparateproduct
specicDeclarationofConformity(DOC)sheet.
DANGER
Theremaybeburiedpower,gas,and/ortelephone
linesintheworkarea.Shockorexplosionmay
occurifyoudigintothem.
Havethepropertyorworkareamarkedforburied
linesanddonotdiginmarkedareas.Contactyour
localmarkingserviceorutilitycompanytohavethe
propertymarked(forexample,intheUnitedStates,
call811forthenationwidemarkingservice).
Introduction
Thevibratoryplowisanattachmentdesignedforuseon
Torocompactutilityloaderstopullexiblepipeand
cableintoandthroughsoil.Itisdesignedtobeusedby
trainoperatorsprimarilyforroutingirrigationandutility
linesundergroundwithouthavingtodigatrenchforthe
entirelengthofthepipeorcable.
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoidinjury
andproductdamage.Youareresponsibleforoperating
theproductproperlyandsafely.
YoumaycontactTorodirectlyatwww .Toro.comfor
productandaccessoryinformation,helpndinga
dealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineToroparts,or
additionalinformation,contactanAuthorizedService
DealerorToroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.
Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(
Figure2),whichsignalsahazardthatmaycauseserious
injuryordeathifyoudonotfollowtherecommended
precautions.
Figure2
1.Safetyalertsymbol
Thismanualalsouses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Introduction.................................................................2
Safety...........................................................................3
StabilityRatings....................................................4
SoundPressure....................................................4
VibrationLevel....................................................5
SafetyandInstructionalDecals.............................5
ProductOverview........................................................6
Specications.......................................................6
Attachments/Accessories.....................................6
Operation.....................................................................6
InstallingaBlade..................................................6
Plowing................................................................7
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA.
AllRightsReserved
GaugingPlowDepth............................................7
TransportingthePlow..........................................8
RemovingthePlowfromtheTraction
Unit..................................................................8
OperatingTips.....................................................8
Maintenance...............................................................10
RecommendedMaintenanceSchedule(s)................10
GreasingthePlow..............................................10
ServicingtheGearLube.....................................11
ReplacingtheCoulter.........................................11
Storage.......................................................................12
Troubleshooting.........................................................13
Safety
Improperuseormaintenancebytheoperatoror
ownercanresultininjury.Toreducethepotential
forinjury,complywiththesesafetyinstructionsand
thoseinthetractionunit
Operator’ s Man ual
.Always
payattentiontothesafetyalertsymbol,which
means
Caution
,
W ar ning
,or
Danger
—personal
safetyinstruction.Failuretocomplywiththe
instructionmayresultinpersonalinjuryordeath.
DANGER
Contactwiththemovingplowcancuthands,feet,
orotherbodyparts.
Keepyourhands,feet,andanyotherpartofyour
bodyorclothingawayfrommovingparts.
Beforeadjusting,cleaning,repairing,and
inspectingtheplow,lowerittotheground,
stoptheengine,removethekey,andwaitforall
movingpartstostop.
DANGER
Theremaybeburiedpower,gas,and/ortelephone
linesintheworkarea.Shockorexplosionmay
occurifyoudigintothem.
Havethepropertyorworkareamarkedforburied
linesanddonotdiginmarkedareas.Contactyour
localmarkingserviceorutilitycompanytohavethe
propertymarked(forexample,intheUnitedStates,
call811forthenationwidemarkingservice).
WARNING
Whentheengineisoff,attachmentsintheraised
positioncangraduallylower.Someonenearbymay
bepinnedorinjuredbytheattachmentasitlowers.
Alwayslowertheattachmentlifteachtimeyoushut
offthetractionunit.
WARNING
Whengoingupordownhill,themachinecould
overturniftheheavyendistowardthedownhill
side.Someonemaybepinnedorseriouslyinjured
bythemachineifitoverturns.
Operateupanddownslopeswiththeheavyendof
themachineuphill.Anattachedplowwillmake
thefrontendheavy.
3
WARNING
Ifyoudonotfullyseattheattachmentlocking
pinsintheattachmentmountplateholes,the
attachmentcouldfalloffofthetractionunitseverely
injuringtheoperatororbystanders.
Ensurethatyoufullyseattheattachment
lockingpinsthroughtheholesintheattachment
mountplatebeforeliftingtheattachment.
Ensurethattheattachmentmountplateisfreeof
anydirtordebristhatmayhindertheconnection
ofthetractionunittotheattachment.
Refertoyourtractionunit
Operator’ s Man ual
fordetailedinformationonsafelyconnectingan
attachmenttoyourtractionunit.
WARNING
Theplowisveryloudduringoperation;overtime,
yourhearingmaybeimpairedifunprotected.
Wearhearingprotectionduringoperation.
WARNING
Lightningcancausesevereinjuryordeath.If
lightningisseenorthunderisheardinthearea,do
notoperatethemachine;seekshelter.
WARNING
Whentheplowisoutoftheground,bystanders
couldbeinjuredbytheswingingplow,and/orthe
tractionunitcouldbeoverturnedbytheinertiaof
theswingingplow,crushingyouorbystanders.
Keeptheplowlowatalltimes.
Usecautionwhenturninganddonotturn
quickly.
Keepallbystandersatleast6ft.(2meters)away
whileoperating.
CAUTION
Hydrauliccouplers,hydrauliclines/valves,and
hydraulicuidmaybehotandcanburnyouifyou
touchthem.
Weargloveswhenoperatingthehydraulic
couplers.
Allowthetractionunittocoolbeforetouching
hydrauliccomponents.
Donottouchhydraulicuidspills.
StabilityRatings
Todeterminethedegreeofslopeyoucantraversewith
theplowinstalledonatractionunit,ndthestability
ratingforthehillpositionyouwanttotravelinthe
appropriatetablebelow,thenndthedegreeofslope
forthesameratingandhillpositionintheStabilityData
sectionofthetractionunitOperator’sManual.
WARNING
Exceedingthemaximumrecommendedslope
cancausethetractionunittotip,crushingyouor
bystanders.
Donotdrivethetractionunitonaslopesteeper
thanthemaximumrecommendedslope,as
determinedinthefollowingtablesandthetraction
unit
Operator’ s Man ual
.
Important:Ifyouhaveatractionunitotherthan
aTXcompactutilityloader,usethecounterweight
onthetractionunitwhenusingtheplow.Failureto
usethecounterweightwillcausethetractionunitto
becomeunstable.
OrientationStabilityRating
FrontUphill
C
RearUphill
D
SideUphill
C
SoundPressure
Thisunithasasoundpressurelevelattheoperator’s
earof117dBA,whichincludesanUncertaintyValue
(K)of1dBA.
Soundpressurelevelwasdeterminedaccordingtothe
proceduresoutlinedinENISO11201.
Thesoundpressurelevelwillvarydependingon
conditions.
4
VibrationLevel
Hand-ArmVibration
Measuredvibrationlevel=7m/s
2
UncertaintyValue(K)=2.8m/s
2
Measuredvaluesweredeterminedaccordingtothe
proceduresoutlinedinEN1032.
WholeBodyVibration
Measuredvibrationlevel=0.2m/s
2
UncertaintyValue(K)=0.10m/s
2
Measuredvaluesweredeterminedaccordingtothe
proceduresoutlinedinEN1032*.
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocated
nearanyareaofpotentialdanger.
Replaceanydecalthatisdamagedor
lost.
100-4649
1.Explosionandelectricshockhazards—donotdiginareas
withburiedgasorelectricallines,keepbystandersasafe
distancefromthemachine.
100-4650
1.Crushinghazardofhand—keepbystandersasafedistance
fromthemachine.
2.Crushinghazardoffoot—keepbystandersasafedistance
fromthemachine.
5
ProductOverview
Figure3
1.Vibratoryplowbody
4.Gaugerodassembly
2.Blade(severaloptional
bladestylesareavailable)
5.Coulter
3.Puller(severaloptional
pullerstylesareavailable)
6.Mountingplate
Specications
Note:Specicationsanddesignaresubjecttochange
withoutnotice.
Width
29inches(73.6cm)
Length
35inches(89cm)
Height
24inches(60cm)
Weight
400lb(181.5Kg)
Hydraulicmotordisplacement
1.27in
3
/rev(20.8cc)
Plowcycles2,000VPM
Attachments/Accessories
AselectionofToroapprovedattachmentsand
accessoriesareavailableforusewiththemachineto
enhanceandexpanditscapabilities.Contactyour
AuthorizedServiceDealerorDistributororgoto
www.Toro.comforalistofallapprovedattachments
andaccessories.
Operation
RefertoyourtractionunitOperator’sManualformore
informationoninstallingandremovingattachments
onyourtractionunit.
Important:Alwaysusethetractionunittoliftand
movetheattachment.
InstallingaBlade
Torooffersseveraldifferentbladesandpullers.
PurchaseabladeandpullerfromyourTorodealer.
WARNING
Thebladeissharpandcanswingduring
installationandremoval,cutting,pinching,or
crushinghandsorfeet.
Wearglovesandworkbootsandsecurelyholdthe
blade.
1.Raisetheplowabout36inches(1m)offofthe
groundandinstallthecylinderlock(s).
2.Stoptheengineandremovethekey.
3.Removethetwoclickpinsfromtheclevispins
inthebladebracket,thenremovetheclevispins
(
Figure4)andtheexistingblade(ifinstalled).
Figure4
1.Clickpin
3.Blade
2.Clevispin
4.Slidethenewbladeintothebladebracketandsecure
itatthedesireddepth(achangeinmountingholes
willchangethedepthby3inches(7.6cm)),using
theclevispinsandclickpinsremovedpreviously
(
Figure4).
6
Plowing
1.Movethelynchpinstotheoutsideholesonthe
springrodstoallowtheplowtomovefromside
toside(Figure5).
Figure5
1.Outerhole3.Springrod
2.Lynchpin(ininnerhole)
CAUTION
Whenyouremovethelynchpin,theplowcould
swingintoyouorabystander,orcausethe
tractionunittobecomeunstable.
Holdtheplowintheneutralpositionwhen
movingthelynchpins.
2.Connectthematerialbeinginstalledtotheplow.
3.Ifyourtractionunithasaspeedselector,moveitto
theslow(turtle)position.
4.Starttheengine.
5.Tilttheattachmentplatecompletelybacksothatthe
topoftheplowisparalleltotheground(Figure7).
6.Lowertheplowsothatitisrestingontheground.
Important:Alwaysensurethattheplowison
orinthegroundbeforeengagingtheauxiliary
hydraulicslever.Failuretodosowillcause
excessivevibrationofthetractionunit,possibly
resultingindamage.
Note:Ifyoudigaholetolowerthebladeinto
beforestarting,itwillreducetheriskofbending
theblade.
7.Pulltheauxiliaryhydraulicslevertotheoperator
griptoengagetheplow .
8.Slowlylowertheplowintothegroundtothedesired
depth,whilemovingthetractionunitbackward.
9.Whennished,releasetheauxiliaryhydraulicslever
tostoptheplow.
CAUTION
Whenplowingonahill,theplowcanswing
downhillwhenraisedoutofthesoil.Dueto
theweightoftheplow,ifitswingstoofast,the
forcecouldtipthetractionunitinjuringyouor
others.
Whenplowingonahill,raisetheplowoutof
thegroundslowly,lettingitswingwhilethe
bulletisstillinthesoil.
10.Raisetheplowoutofthegroundfarenoughtopull
thepulleroutofthesoil.
11.Movethetractionunitrearwardtopullouta
workinglengthofmaterial,thenmoveforward
slightlytocreatesomeslackintheline.
12.Stoptheengine.
GaugingPlowDepth
Normally,youwillbeplowingatthemaximumdepth
setbytheblade;however,theplowisalsoequipped
withagaugetoallowyoutolifttheplowanddetermine
howhighabovemaximumdepthyouareplowing.
Thegaugeislocatedontheleftsideoftheplowfacing
thetractionunit.Arodassemblyrunsfromthegauge
totheground.Whentheplowislifted,theindicatoron
thegaugemovesdown.Marksonthegaugeshowthe
numberofincheslowerorhigherthanthemaximum
depththatyouareplowing.Thegaugereadsfrom
+2to-3inches(+5to-7.6cm),withzerobeingthe
maximumdepthonbaregroundand-3being3inches
(7.6cm)abovemaximumdepth.
Figure6andFigure7
illustratethegauge.
Figure6
1.Depthgauge
2.Gaugelockinglever
7
Figure7
1.Gaugerodassembly
2.Paralleltotheground
Whenplowingbareground,maximumdepthis
indicatedonthegaugeasthezeromark.Youcan
plowdowntothe+1mark,butinthiscaseyouwillbe
contactingthegroundwiththecoulteraxle.Plowing
anylowermaydamagethecoulter.
Whenplowinggrasscoveredground,thegaugewill
readaboutaninchlowerthantheactualdepthbecause
ofthegrass.Inthiscase,lowertheplowtothedesired
coulterdepthandnotethereadingonthegauge.
Ifyouaretransportingtheploworareplowingrough
terrain,youcanlockthegaugeatthe+2position
tokeepitfrombeingdamaged.Tolockthegauge,
manuallyraiseittothe+2positionandmovethe
lockinglevertotheleft.
TransportingthePlow
1.Movethelynchpinstotheinsideholesonthespring
rodstopreventsidetosidemovement(Figure5).
CAUTION
Failuretosecuretheplowwillallowittoswing
sidetosideandunbalancetheplow.Dueto
theweightoftheplow,ifitswingstoofast,the
forcecouldtipthetractionunitinjuringyouor
others.
Alwayssecuretheplowwiththelynchpins
intheinnerholesofthespringrodsbefore
transportingtheplow.
2.Raisetheloaderarmsjustenoughtoensurethatthe
bladeclearstheground.
Important:Nevertransporttheplowwiththe
armsfullyraised.
RemovingthePlowfromthe
TractionUnit
RefertoyourtractionunitOperator’sManualfor
completeinstructionsonremovingattachmentsfrom
thetractionunitanddisconnectinghydraulichoses.
1.Withtheplowraisedabovetheground,stopthe
engine.
2.Removethelowerclickpinandclevispinsecuring
thebladetotheplow(tocompletelyremovethe
blade,removeboththeupperandlowerclickand
clevispins)(
Figure4).
3.Swingthebladeupandsecureitasillustratedin
Figure8.
Figure8
1.Stand2.Coulter
4.Tilttheplowforwardandlowerittothegroundor
trailer,withthestandandcoultersupportingthe
weightoftheplow(
Figure8).
5.Stoptheengineandremovetheplowasdirectedin
yourtractionunitOperator’sManual.
OperatingTips
Someoldermodeltractionunitshaveholesthrough
thespringandquickattachpinsonthemountplate
(
Figure9)toallowyoutoinstalltwohairpincotters
whenplowinglongruns.Thiswillensurethatthe
vibrationoftheplowwillnotcausethepinsto
comeloose.
Note:Thequickattachpinsonnewertraction
unitsnolongerneedthehairpincotters.
8
Figure9
1.Hairpincotters
Toreducewearonthetractionunitdrivechain(if
yourmodelhasone),tightenthechainsothereis
only2inches(5cm)ofslackontheupperspan
(refertoyourtractionunitOperator’sManualfor
instructions).
Cleantheareaoftrash,branchesandrocksbefore
plowingtopreventequipmentdamage.
Alwaysbeginplowingwiththeslowestground
speedpossible.Increasespeedifconditionspermit,
butdonotallowthetiresortrackstospin.Spinning
thetracksortireswillcauseturfdamageandplace
stressonthetractionunit.
Alwaysusefullthrottle(maximumenginespeed)
whenplowing.
Alwaysplowbackwards(i.e.,inreverse).
Ifyourtractionunithasaspeedselectorandaow
divider,movethespeedselectortoslow(turtle)and
theowdividertothe10o’clockposition.
Avoidsharpturnswhenplowingtoincrease
productivityandminimizegrounddisturbance.
Ifyourtractionunithastiresandyouhavethe
agriculturalorSiteworkSystemstiresinstalledon
thetractionunit,removethetiresandmovethe
rightsidetirestotheleftandtheleftsidetiresto
theright.Thiswillensurethatthetiretreadpoints
tothereartogiveyouthemosttractionwhenusing
thevibratoryplow .
9
Maintenance
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Beforeeachuseordaily
Greasetheplow.
Every25hours
Checkthegearlubelevel.
Every200hours
Changethegearlube.
Beforestorage
Greasetheplow.
Checkthegearlubelevel.
Paintchippedsurfaces.
CAUTION
Ifyouleavethekeyintheignitionswitch,someonecouldstarttheengine.Accidentalstartingofthe
enginecouldseriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionswitchbeforeyoudoanymaintenance.
GreasingthePlow
ServiceInterval:Beforeeachuseordaily
Beforestorage
Grease6ttings,asshowninFigure10through
Figure13,every8operatinghours.Greaseallttings
immediatelyaftereverywashing.
GreaseType:General-purposegrease
1.Stoptheengineandremovethekey.
2.Cleanthegreasettingswitharag.
3.Connectagreaseguntoeachtting.
4.Pumpgreaseintothettingsuntilgreasebeginsto
oozeoutofthebearings.
5.Wipeupanyexcessgrease.
Figure10
Figure11
Figure12
10
Figure13
ServicingtheGearLube
Checkthegearlubricationoillevelinthegearcaseevery
25operatinghoursandchangeitevery200operating
hoursoronceayear,whicheveroccursrst.
Gearlubetype:SAE90-140APIserviceGL-4orGL-5
Rellcapacity:3pints.
CheckingtheGearLubeLevel
ServiceInterval:Every25hours
Beforestorage
1.Positionthetractionunitandplowonalevelsurface
andlowertheattachmentliftsothattheplowison
theground.
2.Stoptheengineandremovethekey.
3.Checktheclearglassgaugeonthesideofthegear
case(
Figure14).Thegearlubeshouldbeatthelevel
ofthereddotinthecenterofthegauge.
4.Ifthegearlubelevelislow,removethellplug
(
Figure14)andllthecasewithgearlubeuntilitis
levelwiththereddotinthegauge.
Figure14
1.Glassgauge
3.Fillplug
2.Drainplug
5.Replacethellplug.
ChangingtheGearLube
ServiceInterval:Every200hours
1.Positionthetractionunitandplowonalevelsurface
andlowertheattachmentliftsothattheplowison
theground.
2.Stoptheengineandremovethekey.
3.Prepareanappropriatecontainertocatchtheused
oilundertheplow .
4.Removethedrainplug(
Figure14),allowingtheoil
tospilloutintothecontainer.
5.Whennished,replacethedrainplug,ensuringthat
itistight.
6.Removethellplug(
Figure14)andllthecasewith
gearlubeuntilitislevelwiththereddotinthegauge.
7.Replacethellplug.
ReplacingtheCoulter
Ifthecoulterbecomesexcessivelywornordamaged,
replaceit.
1.Backoutthecoulterpinscrewabout0.5inch(1.3
cm),thenstrikeitseveraltimeswithahammerto
loosenthepin(
Figure15).
Figure15
1.Coulterpin
4.Washer
2.Coulter5.Coulterpinscrew
3.Coulterbracket
2.Completelyremovethecoulterpinscrew,washer,
coulter,andcoulterpin(Figure15).
3.Putthenewcoulterintothecoulterbracket
(Figure15).
4.Slidethecoulterpinthroughthebracketandcoulter
andsecureitwiththecoulterpinscrewandwasher
(Figure15).
5.Torquethescrewto45ft-lb(61N-m).
11
Storage
1.Beforelongtermstorage,washtheattachmentwith
milddetergentandwatertoremovedirtandgrime.
2.Greasetheplow.
3.Checkgearcaselubrication.
4.Checkandtightenallbolts,nuts,andscrews.Repair
orreplaceanydamagedorwornpart.
5.Ensurethatallhydrauliccouplersareconnected
togethertopreventcontaminationofthehydraulic
system.
6.Paintallscratchedorbaremetalsurfaces.Paintis
availablefromyourAuthorizedServiceDealer.
7.Storetheattachmentinaclean,drygarageorstorage
area.Coverittoprotectitandkeepitclean.
12
Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Thehydrauliccouplerisnotcompletely
connected
1.Checkandtightenallcouplers.
2.Ahydrauliccouplerisdamaged.
2.Checkthecouplersandreplaceany
thataredamaged.
3.Thereisanobstructioninahydraulic
hose.
3.Findandremovetheobstruction.
4.Ahydraulichoseiskinked.4.Replacethekinkedhose
Theplowdoesnotoperate.
5.Theauxiliaryvalveonthetractionunit
isnotopening.
5.Repairthevalve.
13
Notes:
14
Notes:
15
ToroCompactUtilityEquipmentWarranty
AOne-YearLimitedWarranty
CUEProducts
ConditionsandProductsCovered
TheT oro®Companyanditsafliate,ToroWarrantyCompany,pursuant
toanagreementbetweenthem,jointlywarrantyourT oroCompactUtility
Equipment(“Product”)tobefreefromdefectsinmaterialsorworkmanship.
Thefollowingtimeperiodsapplyfromthedateofpurchase:
ProductsWarrantyPeriod
Loaders,TrenchersandAttachments1yearor1000operating
hours,whicheveroccursrst
KohlerEngines3years
AllotherEngines2years
Whereawarrantableconditionexists,wewillrepairtheProductatnocost
toyouincludingdiagnosis,labor,andparts.
InstructionsforObtainingWarrantyService
IfyouthinkthatyourT oroProductcontainsadefectinmaterialsor
workmanship,followthisprocedure:
1.ContactanyAuthorizedToroCompactUtilityEquipment(CUE)
ServiceDealertoarrangeserviceattheirdealership.Tolocatea
dealerconvenienttoyou,accessourwebsiteatwww.Toro.com.
YoumayalsocallourT oroCustomerCareDepartmenttollfree
at888-865-5676(U.S.customers)or888-865-5691(Canadian
customers).
2.Bringtheproductandyourproofofpurchase(salesreceipt)tothe
ServiceDealer.
3.IfforanyreasonyouaredissatisedwiththeServiceDealer’s
analysisorwiththeassistanceprovided,contactusat:
LCBCustomerCareDepartment
ToroWarrantyCompany
8111LyndaleAvenueSouth
Bloomington,MN55420-1196
TollFree:888-865-5676(U.S.customers)
TollFree:888-865-5691(Canadacustomers)
OwnerResponsibilities
YoumustmaintainyourT oroProductbyfollowingthemaintenance
proceduresdescribedintheOperator’sManual.Suchroutine
maintenance,whetherperformedbyadealerorbyyou,isatyourexpense.
Partsscheduledforreplacementasrequiredmaintenance(“Maintenance
Parts”),arewarrantedfortheperiodoftimeuptothescheduled
replacementtimeforthatpart.Failuretoperformrequiredmaintenance
andadjustmentscanbegroundsfordisallowingawarrantyclaim.
ItemsandConditionsNotCovered
Notallproductfailuresormalfunctionsthatoccurduringthewarranty
periodaredefectsinmaterialsorworkmanship.Thisexpresswarranty
doesnotcoverthefollowing:
Productfailureswhichresultfromtheuseofnon-T ororeplacement
parts,orfrominstallationanduseofadd-on,modied,orunapproved
accessories
Productfailureswhichresultfromfailuretoperformrequired
maintenanceand/oradjustments
ProductfailureswhichresultfromoperatingtheProductinan
abusive,negligentorrecklessmanner
Partssubjecttoconsumptionthroughuseunlessfoundtobe
defective.Examplesofpartswhichareconsumed,orusedup,during
normalProductoperationinclude,butarenotlimitedto,diggingteeth,
tines,sparkplugs,tires,tracks,lters,chains,etc.
Failurescausedbyoutsideinuence.Itemsconsideredtobeoutside
inuenceinclude,butarenotlimitedto,weather,storagepractices,
contamination,useofunapprovedcoolants,lubricants,additives,or
chemicals,etc.
Normal“wearandtear”items.Normal“wearandtear”includes,butis
notlimitedto,wornpaintedsurfaces,scratcheddecalsorwindows,
etc.
Anycomponentcoveredbyaseparatemanufacturer’swarranty
Pickupanddeliverycharges
GeneralConditions
RepairbyanAuthorizedToroCompactUtilityEquipment(CUE)Service
Dealerisyoursoleremedyunderthiswarranty.
NeitherTheToro®CompanynorToroWarrantyCompanyisliable
forindirect,incidentalorconsequentialdamagesinconnectionwith
theuseoftheToroProductscoveredbythiswarranty,including
anycostorexpenseofprovidingsubstituteequipmentorservice
duringreasonableperiodsofmalfunctionornon-usepending
completionofrepairsunderthiswarranty.Allimpliedwarranties
ofmerchantabilityandtnessforusearelimitedtotheduration
ofthisexpresswarranty.Somestatesdonotallowexclusionsof
incidentalorconsequentialdamages,orlimitationsonhowlong
animpliedwarrantylasts,sotheaboveexclusionsandlimitations
maynotapplytoyou.
Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveother
rightswhichvaryfromstatetostate.
ExceptfortheenginewarrantycoverageandtheEmissionswarranty
referencedbelow,ifapplicable,thereisnootherexpresswarranty.The
EmissionsControlSystemonyourProductmaybecoveredbyaseparate
warrantymeetingrequirementsestablishedbytheU.S.Environmental
ProtectionAgency(EPA)ortheCaliforniaAirResourcesBoard(CARB).
ThehourlimitationssetforthabovedonotapplytotheEmissions
ControlSystemWarranty.RefertotheCaliforniaEmissionControl
WarrantyStatementsuppliedwithyourProductorcontainedintheengine
manufacturersdocumentationfordetails.
CountriesOtherthantheUnitedStatesorCanada
CustomerswhohavepurchasedToroproductsexportedfromtheUnitedStatesorCanadashouldcontacttheirT oroDistributor(Dealer)toobtain
guaranteepoliciesforyourcountry,province,orstate.IfforanyreasonyouaredissatisedwithyourDistributorsserviceorhavedifcultyobtaining
guaranteeinformation,contacttheT oroimporter.Ifallotherremediesfail,youmaycontactusatT oroWarrantyCompany.
374-0261RevA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Toro Vibratory Plow, Compact Utility Loaders User manual

Category
Mini tillers
Type
User manual
This manual is also suitable for

Toro Vibratory Plow, Compact Utility Loaders is a powerful attachment designed for use with Toro compact utility loaders to pull flexible pipe and cable into and through soil. It is ideal for routing irrigation and utility lines underground without having to dig a trench for the entire length of the pipe or cable. The vibratory plow features a variety of optional blades and pullers to accommodate different soil conditions and job requirements. It also has a gauge rod assembly and coulter to help ensure accurate plow depth and smooth operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI