4/12/17 1 of 2 Bench
Step 1
Alaterre Furniture
Country Cottage Bench
Thank you for purchasing the Country Cottage Bench from ALATERRE FURNITURE. We have found
it helpful to have a second person present during the assembly process.
Bench Assembly Instructions
Parts
Read through these instructions thoroughly before beginning assembly. We have found this
to be of great value when assembling this product.
NO. QTY.DESCRIPTIONDRAWING
A
TOP
1
POSTS
4
B
C
Bottom
1
NO. QTY.DESCRIPTIONDRAWING
D
8
WRENCH
1
E
45MM BOLT
A
B
B
B
B
4/12/17 2 of 2 Bench
Step 2
Step 3
Step 4
CARE
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the order form
on the web site to order your replacement parts. Thank You!
Remove all parts and hardware from packing material. Wooden pieces should be placed on a
non abrasive surface to prevent damage to the finish.
Lay Top (A) upside down on a non abrasive surface. Attach 2 Posts (B) using 2-45MM Hex
Bolts (D). NOTE: Do not tighen firmly at this time.
Attach Bottom (C) to Post (B) using 2-45MM Hex Bolts (D). Note: DO NOT TIGHTEN
AT THIS TIME! Attach two additional Post (B) to Top (A) and Bottom (C) using 4-45MM
Hex Bolts (D). TIGHTEN ALL BOLTS AT THIS TIME!
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
REPLACEMENT PARTS:
-
1
-
2
Wateday PF-ACCA03RA Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Alaterre Furniture ACCA13RA Installation guide
-
-
-
-
-
-
-
Bolton Furniture AJ0049P0 Operating instructions
-
-
Weider WEBE2496 User manual
