ESP EM3WNMCDLK User manual

www.espuk.com

3W LED NON MAINTAINED EMERGENCY

Please read the instructions prior to installation.

1. Check product labels for correct voltage and frequency before installation.

2. The maximum ambient temperature is 25°C. Keep the luminaire away from

heat source i.e. heating duct, direct sunlight and other similar situations.

3. Only qualied electricians are to install these units in accordance with IEE

regulations. Rated Input Voltage: 220-240V AC 50/60Hz

4. Do not connect the battery until there is uninterrupted mains supply

available.

IMPORTANT SAFETY

Before installing this product or carrying out and service on this luminaire,

ensure that the mains supply is fully isolated.

SPECIFICATION

LED: 3W

Rated input voltage: 220V-240V AC ~ 50/60Hz

Constant Current: 500mA

Duration: 3 Hour

Maximum Ambient Temperature: 25°C

Battery: 4.8V 1.8Ah Ni-CD

MODIFICATION

We don’t recommend any modication to this product. Any modication may

render the product as unsafe and will invalidate any safety / approvals. We

will not accept any responsibility for any modied products or for any damage

caused as a result of their modication.

WIRING DIAGRAM

INSTALLATION STEPS