Whitmor 6780-3139-WHT User manual

B 1 ea

Left side base

A 1 ea

Right side base

C 8 ea

Tube

Assembly

Time:

Less than

15 minutes.

This product's intended use

is for shoe storage.

Tools Needed: No tools required.

NOTE: Parts A & B are marked

“right” and “left”.

MADE IN CHINA

Part Reference

F6990

F6991

F6992

STEP 1. Place right side base (A) on a flat hard surface. Press tubes (C) into each

hole in the assembled right base. Press tubes firmly until seated into the holes.

STEP 2. Place left side base (B) on top of tubes aligning the holes in the side base with

the end of each tube. Press the side base down until tubes are firmly seated into the

holes.

STEP 3. Set assembled shoe rack

upright. Assembly is now complete.

8680 Swinnea Road • Suite 103 • Southaven, MS • 38671

NEED HELP? For help with assembly, or if you are missing a part,

please call Whitmor’s Customer Service Department, 1-888-944-8667

between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday

through Friday. Or email: customer_service@whitmor.com

Rev. 0 | 5.11.10 Printed in China

Download PDF