YARDGARD 328352A FAQ

FAQ

Chain Link Fence Gate

How much space do I allow for my gate?

The gate opening should allow space for the gate itself as well as 2" on each side for gate hardware. If

purchasing a driveway gate, the gate opening should allow space for the two gate panels as well as 2"

on each side for the gate hardware and 2" between the panels for the latch

Yes your gate comes pre-assembled. Your gate will come with hardware for the gate only. The hardware for

the posts and the posts themselves will need to be purchased separately. The only gates that do not come

preassembled are the adjustable gates as these will need to be adjusted to ﬁt your gate opening.

While yes, your gate can be installed on a wooden post, we recommend using the appropriate chain link gate

hardware and posts. If you are attaching the gate to a wooden post you would need to purchase a lag screw

hinge and a frame hinge.

There is no way to attach the two panels together so you would need to order a single panel through the THD

special order program.

Besides the galvanized version, the chain link gates come in a black, green, and white vinyl coating.

Check with your local store to see if your color is in stock or can be special ordered.

Does my gate come pre-assembled with hardware?

Can my gate be installed on a wooden post?

Can I combine my drive way gates to make one long gate?

Does my gate come in different colors?

For More Questions & Concerns Please Call: (800)628-8815

This manual is also suitable for

Download PDF