POLYWOOD NB60TE Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
NB60TE
Type
Operating instructions

This manual is also suitable for

B
FIGURE:2
B
Seat
B - 1/4-20 X 2-1/4 WAFER SHCS
8
2
A - 5/16 PLASTIC PINS
__(1) Hardware pack
Qty. Description
Model: NB48 NB60
Do not tighten bolts yet fig.1
Attach the side frames with (4) 2 1/4" bolts
Lay back assembly on the floor
on the back assembly. fig.1
Insert (2) pins into pre-drilled holes
Step 2
part of the seat using (2) 2 1/4" bolts. fig.2
Set bench upright. First, attach the front
TOOLS NEEDED
(INCLUDED)
4mm HEX KEY, ALLEN, T-HANDLE
Step 3
Step 1
the pins located on the back assembly.
Attach the rear of the seat using
Push the rear part of the seat up into
Tighten all bolts at this time
(2) 2 1/4" bolts. fig. 2
Step 4
A
__(2) Sideframe
__(1) Seat
__(1) Back
ALL HARDWARE IS COATED STAINLESS STEEL
11/27/2012
ASSEMBLY INSTRUCTIONS
fig.1
B
Back
B
Sideframe
  • Page 1 1

POLYWOOD NB60TE Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
NB60TE
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents