Noble House 303767 Operating instructions

Type
Operating instructions

This manual is also suitable for

Caution : You must read this before you proceed
TABLE
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
CAUTION
: This Table is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Table and to prevent damage to the Table, two adults are
needed to execute this action.
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Label Picture Description QTY
A Table 1
B Leg Support Bar 2
C Middle Support Bar 1
D Side Support Bar 2
Label Picture Description QTY
Long Bolt (M6x50mm) 19
Medium Bolt
(M6x40mm)
5
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Medium Bolt
(M6x40mm)
5
Short Bolt (M6x30mm) 5
Allen Key 2
Before Beginning Assembly:
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
This Table has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Table parts, the above picture is to
help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
OVERVIEW
Table
Leg Support Bar
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 1
This Table has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Table parts, the above picture is to
help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
Unpack and place all parts on a clean, non-marring surface.
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 2
2.1)
With the assistance of an adult helper, unfold the Table(A) as shown.
Note: When unfolding the Table(A), you must hold the Legs against the
Table(A)
2.2)
Then lay the Table(A) facedown onto a clean, flat surface to avoid any
scratches or damage to the product.
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.2
Step 6.1
Step 6.2
A
A
D
FRONT FACING
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 3
2.1)
With the assistance of an adult helper, unfold the Table(A) as shown.
Note: When unfolding the Table(A), you must hold the Legs against the
Table(A)
2.2)
Then lay the Table(A) facedown onto a clean, flat surface to avoid any
scratches or damage to the product.
3.1)
Lift legs upwards and outwards until they are flush with the base of the
Table, as shown in the above picture.
3.2)
Insert the three Long Bolts(
) through the mounting position of the Legs
and affix the Legs using Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Legs.
Table
Leg Support Bar
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 4
Position Leg Support Bar(B) as shown in picture above.
4.1)
Secure Leg Support Bar(B) to Legs using Short Bolt(
) with Allen
Key(
).
4.2)
Secure Leg Support Bar(B) and Table(A) using Short Bolt(
) with Allen
Key(
).
Only loosely tighten the Bolts.
Repeat the same process with the other Leg Support Bar(B).
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 5
Position Middle Support Bar(C) as shown in picture above.
Insert the four Long Bolts(
) through the mounting positions and affix the
Middle Support Bar(C) to Table(A) using the Allen Key(
)
Only loosely tighten the Bolts.
Position Leg Support Bar(B) as shown in picture above.
4.1)
Secure Leg Support Bar(B) to Legs using Short Bolt(
) with Allen
Key(
).
4.2)
Secure Leg Support Bar(B) and Table(A) using Short Bolt(
) with Allen
Key(
).
Only loosely tighten the Bolts.
Repeat the same process with the other Leg Support Bar(B).
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 6.1
Step 6.2
A
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 6
Position Side Support Bar(D) as shown in picture above.
6.1)
Insert four Long Bolts(
) through the vertical mounting positions of the
Side Support Bar(D) and affix using Allen Key(
)
6.2)
Insert two Medium Bolts(
) through the horizontal mounting positions of
the Support Bar(D) and affix using Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Side Support Bar(D).
Now, in a sequential manner, tighten all Bolts at all joints.
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
Step 6.1
Step 6.2
A
A
B
D
FRONT FACING
Step 3.1
Step 3.2
C
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 7
Stand the Table right side up.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Position Side Support Bar(D) as shown in picture above.
6.1)
Insert four Long Bolts(
) through the vertical mounting positions of the
Side Support Bar(D) and affix using Allen Key(
)
6.2)
Insert two Medium Bolts(
) through the horizontal mounting positions of
the Support Bar(D) and affix using Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Side Support Bar(D).
Now, in a sequential manner, tighten all Bolts at all joints.
Table
Leg Support Bar
Step 2.1
Step 2.2
Step 4.1
Step 4.2
A
A
B
FRONT FACING
Step 3.1
Step 3.2
C
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Caution : You must read this before you proceed
BENCH
CAUTION
: This Bench is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Bench and to prevent damage to the Chair, two adults may be
needed to execute this action.
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
CAUTION
: This Bench is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Bench and to prevent damage to the Chair, two adults may be
needed to execute this action.
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Label Picture Description QTY
A
Bench seat with
legs
1
B Leg Support Bar 2
Label Picture Description QTY
Long Bolt
(M6x50mm)
5
Short Bolt
(M6x30mm)
5
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Short Bolt
(M6x30mm)
5
Allen Key 2
Before Beginning Assembly:
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
OVERVIEW
This Bench has multiple parts and may require up to some 30 minutes
to assemble. To give you an overview of the Bench parts, the above
picture is to help you put the various parts into perspective. Please
read through the instructions below to familiarise youself with the parts
and steps before assembly.
Step 3.1
Step 3.2
A
A
B
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 1
OVERVIEW
This Bench has multiple parts and may require up to some 30 minutes
to assemble. To give you an overview of the Bench parts, the above
picture is to help you put the various parts into perspective. Please
read through the instructions below to familiarise youself with the parts
and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Step 3.1
Step 3.2
A
A
B
Step 2.2
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 2
Place the Bench (A) facedown, onto a clean, soft surface to avoid any
scratches or damage to the product.
2.1)
Lift legs upwards and outwards until the braces are flush with the
base of the Bench, as shown in the above picture.
2.2)
Insert the two Long Bolts(
) through the mounting position of the
Leg using the Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Leg.
Step 3.2
A
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Place the Bench (A) facedown, onto a clean, soft surface to avoid any
scratches or damage to the product.
2.1)
Lift legs upwards and outwards until the braces are flush with the
base of the Bench, as shown in the above picture.
2.2)
Insert the two Long Bolts(
) through the mounting position of the
Leg using the Allen Key(
)
Only loosely tighten the Bolts.
Repeat the same process with the other Leg.
Step 3.1
Step 3.2
A
B
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 3
Position Leg Support Bar(B) as shown in picture above.
3
.1)
Secure Leg Support Bar(B) to Leg Connector using Short Bolt(
)
with Allen Key(
).
3
.2)
Secure Leg Support Bar(B) to Bench(A) using Short Bolt(
) with
Allen Key(
).
Only loosely tighten the Bolts.
Repeat the same process with the other Leg Support Bar(B).
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Position Leg Support Bar(B) as shown in picture above.
3
.1)
Secure Leg Support Bar(B) to Leg Connector using Short Bolt(
)
with Allen Key(
).
3
.2)
Secure Leg Support Bar(B) to Bench(A) using Short Bolt(
) with
Allen Key(
).
Only loosely tighten the Bolts.
Repeat the same process with the other Leg Support Bar(B).
Step 3.2
A
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Step 4
Stand the Bench right side up.
Gently, sit into to the Bench. This would help to align all parts at all
joints and to protect wobble issue.
Then get off the Bench, in a sequential manner, tighten all Bolts until
fully locked into position.
Your Bench is ready for use.
This Bench can only be used on a flat, level surface.
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Stand the Bench right side up.
Gently, sit into to the Bench. This would help to align all parts at all
joints and to protect wobble issue.
Then get off the Bench, in a sequential manner, tighten all Bolts until
fully locked into position.
Your Bench is ready for use.
This Bench can only be used on a flat, level surface.
Step 3.1
Step 3.2
A
A
B
Step 2.1
Step 2.2
Bench Seat With Legs (A)
Leg Support Bar (B)
FRONT FACING
Leg
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to
direct sunlight is recommended.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow, and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Noble House 303767 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI