Dorel DL7204 Owner's manual

Category
Office & computer chairs
Type
Owner's manual

This manual is also suitable for

PUSHBACK RECLINER
Model No:
DL7204
UPC CODE:
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
___________________
INSTRUCTION MANUAL
0-65857-17819-7
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
DO NOT leave children unattended on or beside the recliner.
DO NOT use your recliner as a step stool.
* Ensure that all parts and components are located before beginning assemble.
* Assemble on soft surfaces to prevent damage to the product finish.
* Read all instructions before use of the recliner.
* Do not use the unit if it is damaged or broken.
* Caution: Adult assembly required.
* Assembly will require 2 people.
* Estimated assembly time: 15 minutes.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CALL 1-800-295-1980
PARTS LIST
A B C
D E F
1 PC
PLASTIC WASHER
4 PCS
PUSHBACK RECLINER
DL7204
1 PC
4 PCS
1 PC
1 PC
RIGHT WING
FOOT
CHAIR BODY
CHAIR BACK
LEFT WING
STEP 1:
On a clean smooth surface, gently turn the chair body (A) on its side.
Screw feet (E) and plastic washers (F) to chair body (A) by turning clockwise.
PUSHBACK RECLINER
DL7204
A
F
E
STEP 2:
Attach chair back (B) to chair body (A) by sliding the brackets on the chair back (B) into the
glides on chair body (A) as shown.
PUSHBACK RECLINER
DL7204
NOTE: Both sides must be inserted in the base at the same time. This step is best
performed with 2 people.
B
A
STEP 3:
Attach wings (C & D) to chair back (B) by sliding the brackets on the wings (C & D) into the
glides on chair back (B) as shown.
PUSHBACK RECLINER
DL7204
C
B
A
D
STEP 4:
Place the flap into position using the Velcro strips as shown.
PUSHBACK RECLINER
DL7204
PUSHBACK RECLINER
DL7204
While holding on to the armrests, push back on the back rest to operate
the reclining function.
NOTE:
That's it! You've finished assembling your Pushback Recliner.
PUSHBACK RECLINER
DL7204
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
Dust regularly with a
soft, dry cloth to
prevent soil build up.
Keep away from heat
to avoid glazing,
melting or scorching.
Use a professional
cleaning service to
clean the fabric.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
MODEL #: DL7204
Customer Service
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKU number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
C
B
D
E
A
B
B
B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Dorel DL7204 Owner's manual

Category
Office & computer chairs
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI