2. Computers & electronics
  3. Software
  4. Samyung
  5. SCD-2000/SCD-2300(23)

Samyung SCD-2000/SCD-2300(23) Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Samyung SCD-2000/SCD-2300(23) Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Operation Manual |
ECDIS (Electronic Chart Display and
Information System)
USER’s MANUAL
version 14
SCD-2000, SCD-2300
SAMYUNG ENC
Guide Line for Safe Use
WARNING
Do not open this equipment.
This works on high voltage that may cause electric shock.
Only an approved person can handle the inner parts of the equipment.
Do not let any cup or container in which water or chemicals are put stay
near or on it.
Water may cause fire or electric shock, when the equipment gets wet.
Do not let any foreign substance come into in the vent of the power
supply in the backside of the main body.
Danger for shock
WARNING
Do not disassemble or alter this.
It may cause fire, shock, injury, etc.
Do not touch this by wet hands.
Danger for shock
Get this away from rain or water.
Water may cause fire or electric shock, when the apparatus gets wet.
Use rated fuse.
Use it, or it may cause fire, shock, or injury.
Please contact the service center in case any unapproved peripheral device
is connected to this apparatus.
The apparatus may be damaged.
Electronic Chart Display and Information System
2
SCD-2300 | SCD-2000
CAUTION
Do not edit installed ECDIS Software.
When the ECDIS S/W unauthorized deletion or modified,
It does not guarantee the normal operation, excluded from the free Customer Services.
Do not use functions other than installed ECDIS.
Use only the functionality provided to users,
The uses of other functions (for example, Windows programs) are the responsibility of
the user.
If there is a problem with the operating phase of the ECDIS
Do not be recovered directly, Contact customer Service center then be carried out in
accordance with procedure.
See Annex F for more information about Q&A., Annex G about Customer Services.
Electronic Chart Display and Information System
i
Table of Contents
Table of Contents
Chapter1. Overview ............................................................................................................................. 2
1 ECDIS Overview .............................................................................................................................. 2
1-1 What is ECDIS? .............................................................................................................................. 2
1-2 About SCD-2000 ........................................................................................................................... 3
1-3 Management Version of SCD-2000 ..................................................................................... 4
1-4 Rules of SCD-2x00 ....................................................................................................................... 4
Chapter2. Instruction ......................................................................................................................... 5
1 Equipment Diagram ...................................................................................................................... 5
1-1 Equipment Dimensions .............................................................................................................. 5
2 H/W Installation.............................................................................................................................. 7
2-1 H/W Components ........................................................................................................................ 7
2-2 Sensor Interface ......................................................................................................................... 13
2-3 H/W Components ..................................................................................................................... 14
2-4 Layout of Interface board ................................................................................................... 16
2-5 Connection ................................................................................................................................... 18
3 INSTALL S/W .................................................................................................................................. 25
3-1 Install S/W ..................................................................................................................................... 25
4 Initial Configuration .................................................................................................................... 27
4-1 Method of Initial Configuration .......................................................................................... 27
5 Purchase S-63 Chart ................................................................................................................... 31
5-1 Purchase procedure of S-63 Chart .................................................................................... 31
Electronic Chart Display and Information System
ii
SCD-2300 | SCD-2000
Chapter3. Operation ......................................................................................................................... 32
1 START ECDIS ................................................................................................................................... 32
1-1 Power up ....................................................................................................................................... 32
1-2 Start & Exit ECDIS ..................................................................................................................... 32
2 MAIN SCREEN ............................................................................................................................... 34
2-1 MAIN SCREEN ............................................................................................................................. 34
2-2 Chart Area ..................................................................................................................................... 35
2-3 MENU .............................................................................................................................................. 35
2-4 TOOLBAR ....................................................................................................................................... 40
2-5 ALRAM Indicator ........................................................................................................................ 43
2-6 INFO-WINDOW .......................................................................................................................... 44
2-7 How to Input Coordinates and Numbers....................................................................... 45
2-8 Dialog & Window Closing ..................................................................................................... 46
3 CHART ............................................................................................................................................... 47
3-1 Chart Control ............................................................................................................................... 47
3-2 CHART CONVERTING .............................................................................................................. 49
3-3 Chart Manager ............................................................................................................................ 54
3-4 Display Chart ............................................................................................................................... 55
3-5 Chart Configuration .................................................................................................................. 56
3-6 MANUAL UPDATES ................................................................................................................... 58
3-7 CHART1 .......................................................................................................................................... 65
3-8 Query .............................................................................................................................................. 68
4 OWNSHIP ........................................................................................................................................ 71
4-1 OWNSHIP ...................................................................................................................................... 71
Electronic Chart Display and Information System
Operation Manual
iii
Operation Manual | 1 ECDIS Overview
4-2 VELOCITY VECTOR .................................................................................................................... 72
4-3 LOOK-AHEAD MONITORING ............................................................................................... 73
4-4 ANCHORING ................................................................................................................................ 74
4-5 TRACK ............................................................................................................................................. 75
4-6 Display Own ship Info ............................................................................................................. 78
4-7 Dimension ..................................................................................................................................... 80
5 ARPA TARGET ................................................................................................................................. 82
5-1 ARPA Target ................................................................................................................................. 82
5-2 ARPA Info ...................................................................................................................................... 82
5-3 ARPA Options.............................................................................................................................. 83
5-4 ARPA List ....................................................................................................................................... 85
5-5 ARPA TRACK ................................................................................................................................ 86
6 AIS TARGET ..................................................................................................................................... 87
6-1 AIS Targets ................................................................................................................................... 87
6-2 AIS Targets ................................................................................................................................... 88
6-3 AIS Options .................................................................................................................................. 89
6-4 AIS Target List ............................................................................................................................. 91
6-5 AIS TRACK ..................................................................................................................................... 92
6-6 AIS ATON ...................................................................................................................................... 93
6-7 AIS SART ........................................................................................................................................ 94
7 ETC. Configuration ....................................................................................................................... 95
7-1 EBL/VRM ........................................................................................................................................ 95
7-2 LANGUAGE ................................................................................................................................... 96
7-3 TRANSPARENCY ......................................................................................................................... 97
Electronic Chart Display and Information System
iv
SCD-2300 | SCD-2000
7-4 SKIN Options ............................................................................................................................... 98
7-5 DISTANCE UNIT .......................................................................................................................... 98
7-6 OWNSHIP CENTER .................................................................................................................... 99
7-7 MOTION TIME ........................................................................................................................... 100
7-8 ALERT ............................................................................................................................................ 100
7-9 COLOR TEST ............................................................................................................................... 101
7-10 BRIGHT ......................................................................................................................................... 101
7-11 SHORT-CUT KEY ....................................................................................................................... 102
7-12 BACKUP ARRANGEMENTS .................................................................................................. 104
7-13 SAVE USER CONTROL SETTINGs ...................................................................................... 105
8 SENSOR ......................................................................................................................................... 106
8-1 SENSOR ........................................................................................................................................ 106
8-2 SIGNAL Options ....................................................................................................................... 107
8-3 SENSOR & SIGNAL TIME OUT .......................................................................................... 108
8-4 DISPLAY INFORMATION WINDOW Options ............................................................... 110
8-5 OFFSET of OWNSHIP POSITION ....................................................................................... 111
8-6 OUTPUT SENSOR Options ................................................................................................... 112
9 RSC (RADAR IMAGE) ............................................................................................................... 114
9-1 RADAR SIGNAL ......................................................................................................................... 114
9-2 RADAR CONTROL.................................................................................................................... 115
9-3 RADAR IMAGE COLOR .......................................................................................................... 115
10 ROUTE PLANNING ................................................................................................................... 116
10-1 ROUTE PLAN .............................................................................................................................. 116
10-2 ROUTE PLANNING .................................................................................................................. 118
Electronic Chart Display and Information System
Operation Manual
v
Operation Manual | 1 ECDIS Overview
10-3 ROUTE CHECKING ................................................................................................................... 128
10-4 SEARCH CHART for ROUTE................................................................................................. 129
11 ROUTE MONITORING ............................................................................................................. 132
11-1 ROUTE MONITORING ............................................................................................................ 132
11-2 ROUTE CONTROL .................................................................................................................... 133
12 TOOLS ............................................................................................................................................ 137
12-1 DRAW............................................................................................................................................ 137
12-2 CALCULATOR ............................................................................................................................. 147
12-3 SCREEN SHOT ........................................................................................................................... 149
12-4 NOTEPAD .................................................................................................................................... 149
12-5 LOP (Lines of Position) .......................................................................................................... 150
12-6 RANGE RING & PARALLEL LINE ....................................................................................... 154
12-7 EBL/VRM ...................................................................................................................................... 155
12-8 FIXED OBJECT ............................................................................................................................ 157
12-9 BOOKMARK ................................................................................................................................ 158
12-10 SIMULATOR ................................................................................................................................ 159
13 VOYAGE RECORD ...................................................................................................................... 160
13-1 PAST TRACK ............................................................................................................................... 160
13-2 PAST ALARM .............................................................................................................................. 162
13-3 NAVTEX ........................................................................................................................................ 163
Electronic Chart Display and Information System
1
Operation Manual | 1 ECDIS Overview
Operation Manual
ECDIS (Electronic Chart Display & Information System)
SCD-2000
Electronic Chart Display and Information System
2
SCD-2300 | SCD-2000
Chapter1. Overview
1 ECDIS Overview
1-1 What is ECDIS?
ECDIS (Electronic Chart Display & Information System) is a system for safe navigation. Its scope
and performance are regulated under SOLAS (International Convention for the Safety of Life at
Sea) by IMO (International Maritime Organization). The scope reads as follows:
① ECDIS, which must display all the information it posts, shall be established by an marine
surveyor who the government has appointed;
② ECDIS provides reliable updates on ENC;
③ Its introduction shall reduce the workload in comparison with the use of conventional
paper charts;
④ ECDIS shall indicate any location of own ships sequentially;
⑤ ECDIS shall display additional information such as RADAR, ARPA, AIS, etc. to monitor
routes; and
⑥ ECDIS shall provide the appropriate alarms and indications for any error from the
apparatus and its displayed information.
As for the performances of ECDIS, IEC/IMO/IHO establishes their standard. The documentation for
the standard reads as follows:
① Res.MSC.232(82)
② S-57 Ed 3.1.2;
③ S-52 Ed 6.1(.1) (PL 4.0)
④ S-63 Ed1.1.2
⑤ S-64 Ed3.0.2
⑥ IEC-61174:2015 Ed 4.0;
⑦ IEC-62288:2014 Ed 2.0;
⑧ IEC-60945:2008 Ed 4.0; and
⑨ IEC-61162-1:2010 Ed 4.0 & 2016 Ed 5.0
SCD-2x00, an ECDIS system developed by Samyung ENC, observes all the regulations.
Currently available IHO standards are available at https://www.iho.int/mtg_docs/enc/ECDIS-
ENC_StdsIn_Force.htm
SCD-2300: 23 inch Monitor, Console type
SCD-2000(19”): 19 inch Monitor, Desktop type
SCD-2000(23”): 23 inch Monitor, Desktop type
Electronic Chart Display and Information System
Operation Manual
3
Chapter1. Overview | 1 ECDIS Overview
1-2 About SCD-2000
SCD-2000, an advanced navigation system, is developed according to IEC/IMO/IHO regulations.
Also it provides convenient user-oriented functions. This chapter explains the main functions and
conveniences of the system.
1. Main Functions
- Official S-57, S-63 ENC shall be shown on screen.
- Mercator projection used with standard datum according to WGS84;
- Links with external sensors like GPS, gyro, speed log, AIS, ARPA, echo sounder, weather
cock, wind gauge, BAM, BNWAS, Backup ECDIS, VDR, etc.;
- Inactive GPS for backup, to be triggered automatically when active GPS fails, while two
GPS sensors stay connected;
- Various monitoring functions such as [ROUTE MONITORING], [HEADING MONITORING],
[ANCHOR MONITORING], etc.;
- [ROUTE PLAN] for safe navigation;
- Storage for tracks of own ship, AIS, ARPA targets;
- Navigating tools like draw, calculator, EBL/VRM, notepad, LOP, etc.;
- Chart display modes such as [North-up], [Head-up], [Course-up], [Route-up], etc.;
- Alarms or indicators in accordance with each situation; and
- Two systems in operation for backup arrangement (option).
2. Conveniences
- Toolbar for the quick execution of frequently used functions;
- Shortcut keys for icons of each menu and toolbar;
- Easy of inputting both latitude and longitude;
- Number inputting by trackball wheel or arrow keys;
- Chart zooming with trackball wheel:
- Hiding menu and information window for a good view of the display;
- Storage of screen, track, route, target list, etc. to external files (.csv);
- [AUTO MOTION]: freely moving between pages in the works of figures drawing, chart
moving, etc. while letting the symbol of own ship disappearing out of the screen in no
work;
- As for Korea, available to indicate marine zoning map;
- In English and Korean;
- Available to adjust the transparency of menu and information windows; and
- Available to change the style of menu and information window.
Electronic Chart Display and Information System
4
SCD-2300 | SCD-2000
1-3 Management Version of SCD-2000
2018. 01. 05
SCD-2000 RA1: Initial version Released.
1-4 Rules of SCD-2x00
1. SCD-2300
Viewing Distance: 1.00m
Compass Safety Distance
Standard compass: 4.40m
Steering compass: 2.70m
2. SCD-2000
Viewing Distance: 1.01m
Compass Safety Distance
Standard compass
- Main Process Unit: 1.55m
- Control Unit: 1.15m
- Display Unit: 1.80m
Steering compass:
- Main Process Unit: 0.95m
- Control Unit: 0.70m
- Display Unit: 1.15m
SCD-2x00 is available at 85 degrees below latitude.
Electronic Chart Display and Information System
Operation Manual
5
Chapter2. Instruction | 1 Equipment Diagram
Chapter2. Instruction
1 Equipment Diagram
1-1 Equipment Dimensions
The dimensions of ECDIS SCD-2300, all-in-one type is below;
Electronic Chart Display and Information System
6
SCD-2300 | SCD-2000
The dimensions of ECDIS SCD-2000, separated type is below;
19” Monitor 23” Monitor
Drawing for Monitor Instruction
Electronic Chart Display and Information System
Operation Manual
7
Chapter2. Instruction | 2 H/W Installation
2 H/W Installation
2-1 H/W Components
H/W of SCD-2300 is composed of MCU, monitor, UPS, keyboard, trackball, interfaces, etc.
Descriptions for the components are as follows:
2-1-1 MCU, manufactured by MAXANICT
1. CPU: Intel i3-2330M 2.2GHz
2. RAM: 4GB
3. SSD: 256GB
4. OS: Windows 7(SP1) 32bit
5. DVD R-W
6. Serial Port(RS-232) x 2
7. USB Port x 4
8. LAN Port
2-1-2 Monitor(23inch), manufactured by MAXANICT
1. LCD Monitor
2. Size: 23 inch-wide (509 x 286 mm)
3. Resolution: 1920 x 1080
True Color(32bit)
4. Pixel Pitch: 0.265 * 0.265mm
5. Default Value:
A. Bright: 50%
B. Contrast: 50%
Electronic Chart Display and Information System
8
SCD-2300 | SCD-2000
2-1-3 Keyboard, iMagic
1. Dimension: 450 X 165 X 30mm
2. Cable length: 160cm
3. Interface: USB
2-1-4 Trackball, Kensington
1. Sensor: Trackball type
2. 5 Buttons
3. Interface: USB
2-1-5 NMEA Combiner, SAMYUNGENC
1. INPUT: 10 Ports
2. OUT: 2 Ports
TIP
If the night or in dark environments, turn
ON the external light switch.
TIP
See ‘2-4-2 Interface board Ports’ for more
information.
Electronic Chart Display and Information System
Operation Manual
9
Chapter2. Instruction | 2 H/W Installation
2-1-6 AC/DC Power Supply, POWERPLAZA
1. INPUT: AC90~264V
2. OUTPUT: 12V/4.2A
2-1-7 Power Breaker, LSIS
1. Rated current: 20A
2. Rated breaking current: 1.5kA
2-1-8 AC Noise filter, Orient Electronics
1. AC Input Noise filter
Electronic Chart Display and Information System
10
SCD-2300 | SCD-2000
2-1-9 Converter, Zinnos (OPTION)
1. INPUT: Gyro-compass, Wind gauge, Speed
Sensor
2. OUTPUT: NMEA-0183, RS232/RS422 2 Port.
4800/9600/38400 Baud rate
2-1-10 RSC, RUSSELL TECHNOLOGIES INC (OPTION)
1. RADAR ARPA
2. DC10~36V
[CONNECTION]
(See ‘Annex G. Set RSC’ for SW Configuration)
2-1-11 External Light (OPTION)
1. LED Lamp and Switch
2. 3-step Dimmer
/