Kingston Technology KVR266X64SC25/1 Datasheet

Category
Memory modules
Type
Datasheet

This manual is also suitable for

Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 128M x 64-bit (1GB) CL2.5 SDRAM (Synchronous
DRAM) DDR266 memory module. The components on this module include sixteen
64M x 8-bit (16M x 8-bit x 4 Bank) DDR266 SDRAM sealed in TCP packages. This 200-
pin DIMM uses gold contact fingers and requires +2.5V. The electrical and mechanical
specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) 7.5ns (min.) / 12ns (max.)
Row Cycle Time (tRC) 65ns (min.)
Refresh Row Cycle Time (tRFC) 75ns (min.)
Row Active Time (tRAS) 45ns (min.) / 120,000ns (max.)
Single Power Supply of +2.5V (+/- .25V)
Operating (IDD0) 3.900 W
UL Rating 94 V - 0
Document No. VALUERAM0294-001.A00
04/28/03
Figure 1: KVR266X64SC25/1G 200-Pin DDR266
KVR266X64SC25/1G
1GB 128M x 64-Bit DDR266
CL2.5 200-Pin SODIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
Tolerances : ±.006(.15) unless otherwise specified
2.66
2.50
Units : Inches (Millimeters)
Full R 2x
0.17
(4.20)
0.456
11.40
1.896
(47.40)
0.24
(6.0)
0.086
0.79
(20.00)
2.15
(63.60)
(67.60)
2-
f
0.07
(1.80)
1.25
(31.75)
0.16
±
0.039
(4.00
±
0.10)
0.096
(2.40)
0.07
(1.8)
1
2
0.098
2.45
40 42
39 41
Z Y
199
200
Protective Cover
Protective Cover
  • Page 1 1

Kingston Technology KVR266X64SC25/1 Datasheet

Category
Memory modules
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI