2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Mounting kits
  6. Peerless
  7. MIS660

Peerless MIS660 User manual

  • Hello! I am an AI chatbot trained to assist you with the Peerless MIS660 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ISSUED: 09-08-08 SHEET #: 125-9014-2
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1 of 2
Qty. Part #
A M5 x 25 mm socket pin serreated washer head screw 4 510-1122
B M6 x 20 mm socket pin serreated washer head screw 4 510-9554
C 5/32'' (4mm) security allen wrench 1 560-9646
D # 10 washer 4 540-9400
E M6 x 8 mm socket pin screw 4 520-1255
Parts List
Description
Slide screen onto base until holes align as shown in figure 1.1. Attach screen to stand using four M5 x 25 mm
socket pin serrated washer head screws (A) and flat washers (D) as shown in figure 1.2. Tighten with 4 mm security
allen wrench (C).
D
C
Model: MIS660
Some parts may appear slightly different than illustrated.
A
Before you start make sure all parts listed are included with your product.
This product is UL Listed. It
must be installed by a qualified
professional installer.
R
IMPORTANT! Read instruction sheet before you start installation and assembly.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
B
fig 1.1
fig 1.2
Installation and Assembly - Neck Security Fas-
tener Pack for Philips Display Models:
26HFL5830D/27, 32HFL5860D/27, 37HFL5560D/27,
42HFL7580A/27, 42HFL5860D/27, 52HFL5580D/27
A
D
Stand for 26" and 32" Screens
E
ISSUED: 09-08-08 SHEET #: 125-9014-2
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
2 of 2
Place screen adapter base on to base of stand and
secure using four M6 x 20 mm socket pin serrated
washer head screws (B) or four M6 x 8 mm socket pin
screws (E).
2
Slide adapter tubes into hole located on screen. Secure
using two M5 x 25 mm socket pin serrated washer head
screws (A) and washers (D).
A
B or E
Stand for 37/52" Screens
© 2008, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
D
BASE
SCREEN
ADAPTER BASE
BASE MAY BE DIFFERENT
THAN ILLUSTRATED
/