Hitachi L32A102 Owner's manual

Hitachi
Brand
Hitachi
Model
L32A102
Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

NEED MORE INFO ON THE DTV TRANSITION ?
See page 13 in this User Manual and
please visit www.dtvtransition.org
HITACHI
lnspire the
COLOR TELEViSiON
USER MANUAL
L32AI02
L32At02G
READ THE ENCLOSED INSTRUCTIONS CAREFULLY
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
Record the serial number of your television for future reference,
MODEL NO.
SERIAL NO.
This serial number is located on the back and right side of the television.
If you have a question about this product please call 800-HITACHI for assistance
TUNER
HIGH-DEFINITION MULTIMEDIA iNTERFACE
Thank you for purchasing this HITACHI LCD Color Television.
The instructions in this manual are described mainly with use of the remote control.
You can also use the buttons on the TV if they have the same names as those on the remote control.
To obtain the best performance and safety, please read this manual carefully.
Please keep this manual for future reference.
Contents
important Safety instructions ................................................................................................................................................ 3
Supplied Accessories ............................................................................................................................................................. 6
Preparation .............................................................................................................................................................................. 6
Remote Control Batteries Installation ........................................................................................................................................... 6
Using the Remote Control ............................................................................................................................................................ 6
Positioning the TV Set .................................................................................................................................................................. 7
Removing the Stand ..................................................................................................................................................................... 7
Functional Overview ............................................................................................................................................................... 8
Front Panel .................................................................................................................................................................................... 8
Side Panel ..................................................................................................................................................................................... 8
Rear Panel .................................................................................................................................................................................... 8
Remote Control ............................................................................................................................................................................. 9
Setting up your TV ................................................................................................................................................................. 10
Connecting an antenna, cable TV, or satellite TV ................................................................................................................................. 10
Connecting a standard video device .........................................................................................................................................................10
Connecting a component video device ...................................................................................................................................................11
Connecting a digital audio input ...............................................................................................................................................................11
Connecting a computer ..............................................................................................................................................................................12
Using the basic controls ........................................................................................................................................................ 12
Turning the TV on and off ..........................................................................................................................................................................12
Adjusting the volume ...................................................................................................................................................................................12
Changing the video mode .........................................................................................................................................................................12
Using your TV ......................................................................................................................................................................... 12
Selecting the TV signal source .................................................................................................................................................................13
Changing channels .....................................................................................................................................................................................13
Using the on-screen menus ......................................................................................................................................................................13
Memorizing channels ................................................................................................................................................................................. 13
Manually editing channels .........................................................................................................................................................................14
Viewing channel information .....................................................................................................................................................................14
Adding favorite channels ...........................................................................................................................................................................14
Adjusting video settings .............................................................................................................................................................................15
Adjusting audio settings ............................................................................................................................................................................ 16
Using the Electronic Program Guide .......................................................................................................................................................16
Changing the channel settings .................................................................................................................................................................16
Adding a channel babel .............................................................................................................................................................................. 17
Adjusting timers settings ............................................................................................................................................................................17
Adjusting setup settings .............................................................................................................................................................................18
Setting the parental controls ..................................................................................................................................................................... 19
PC input signal chart .................................................................................................................................................................................25
Changing your computer's video resolution ...........................................................................................................................................25
Troubleshooting ..................................................................................................................................................................... 25
Specifications ......................................................................................................................................................................... 26
Service information ................................................................................................................................................................ 27
Limited Warranty .................................................................................................................................................................... 28
2
important Safety instructions
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated "dangerous voltage" within the
product's enclosure that may be of a sufficient
magnitude to constitute a risk of electric shock to a
person.
,__1 The exclamation point within an equilateral
triangle, is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use the attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Grounding or Polarization- This product may be equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug. Alternate Warnings -
This product is equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the grounding-type plug.
16. Ventilation- Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the product
and to protect if from overheating, and these openings must
not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instructions
have been adhered to.
17. The MAINS plug or an appliance couple is used as the
disconnect device, the disconnect device shall remain
readily operable.
18.Televisions are designed to comply with the recommended
safety standards for tilt and stability. Do not apply excessive
pulling force to the front, or top, of the cabinet which could
cause the product to overturn resulting in product damage
and/or personal injury.
19. Follow instructions for wall, shelf or ceiling mounting as
recommended by the manufacturer.
20. An outdoor antenna should not be located in the vicinity of
overhead power lines or other electrical circuits.
21. If an outside antenna is connected to the receiver be sure
the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding for the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna discharge unit,
connection to grounding electrodes and requirements for
the grounding electrode.
NEC National Electric Code
Ground clamp
Electric service equipment .
L
Ground clamps
. Antenna lead-in wile
Antenna discharge unit
(NEC Section 810-20)
i
j/S
_rounding
electrode system (NEe Art 250 Part H)
Note to the CATV system installer: This reminder is provided to
call the CATV system installer's attention to Article 820-44 of the
NEC that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of
cable entry as practical.
End of life directives: Your new TV contains materials which can
be recycled and reused. At the end of your TV's life, specialized
companies can dismantle the discarded TV to concentrate the
reusable materials and to minimize the amount of materials to
be disposed of. Dispose of your old TV according to local
regulations.
3
Safety Check
After completing any service or repair to this TV, ask the service
technician to perform routine safety checks to determine that
your TV is in correct operating condition.
Power source
Operate your TV only from the type of power source indicated
on the marking label. If you are not sure of the type of power
supplied to your home, consult your TV dealer or local power
company.
The power cord is used as the disconnect device and shall
remain readily operable.
Caution
To reduce the risk of electric shock, do not remove
the cover or back. There are no user-serviceable
parts inside. Refer servicing to qualified service
personnel.To reduce the risk of fire or electric
shock, do not expose your TV to rain or moisture.
Caution
To prevent electric shock, match the wide blade on the power
cord plug to the wide slot on an electric outlet. If the plug does
not fit, consult a licensed electrician to replace the obsolete
outlet. Do not modify the power cord plug, or you will defeat
this safety feature.
Warning
• To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
• The LCD television should not be exposed to dripping or
splashing and objects filled with liquids, such as vases,
should not be placed on the television.
• This apparatus shall be connected to a mains socket
outlet with a protective earthing connection.
Lead/Mercury Notice
This product contains lead and one or more
non-replaceable mercury backlights. Do not put in
trash. Recycle or dispose of according to applicable
laws. For product recycling and disposal information,
contact your local government agency or visit
www.eiae.org (in USA) or www.epsc.ca (in Canada).
FOR MORE INFORMATION, CALL 800-HITACHI.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician
for help.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions :
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi Home Electronics (America), Inc.
900 Hitachi Way
Chula Vista, CA 91914-3556
Tel.800-448-2244 (800-HITACHI)
ATTN: Customer Relations
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved
by Hitachi Home Electronics (America), Inc, may void the user's
authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.
Any cables that are supplied with the system must be replaced
with identical cables in order to assure compliance with FCC rules.
Order Hitachi spares as replacement cables.
Public viewing of copyrighted material
Public viewing of programs broadcast by TV stations and cable
companies, as well as programs from other sources, may
require prior authorization from the broadcaster or owner of the
video program material.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized,
and is intended for home and other limited consumer uses
only unless otherwise authorized. Reverse engineering or
disassembly is prohibited.
4
Congratulations on your purchase! As you enjoy your new product, please
keep these safety tips on mind:
TUNE INTO SAFETY
THE ISSUE
- The home theater entertainment experience is a growing trend and larger flat
displays are popular purchases. However, flat panel displays are not always
supported on the proper stands or installed according to the manufacturer's
recommendations.
- Flat Panel displays that are inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests or carts may fall over and cause injury.
HITACHI CARES!
- The consumer electronics industry is commited to making home entertainment
enjoyable and safe.
One size does NOT fit all. Follow the manufacturer's recommendations for
the safe installation and use of your flat panel display.
Carefully read and understand all enclosed instructions for proper use of
this product.
Don't allow children to climb on or play with furniture and television sets.
Don't place flat panel displays on furniture that can easily be used as steps,
such as a chest of drawers.
Remember that children can become excited while watching a program,
especially on a "larger than life" flat panel display. Care should be taken
to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat
panel display so that they cannot be pulled or grabed by curious children.
WALL MOUNTING: IF YOU DECIDETO WALL
MOUNTYOURFLATPANELDISPLAY,ALWAYS:
Use a mount that has been recommended by the display manufacturer
and/or listed by an independent laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount
manufacturers.
If you have any doubts about your ability to safely install your flat panel
display, contact your retailer about professional installation.
Make sure that the wall where you are mounting the display is appropriate.
Some walt mounts are not designed to be mounted to walls with steel studs
or old cinder block construction. If you are unsure, contact a professional
installer.
A minimum of two people are required for installation. Flat panel displays
can be heavy.
CEA
Consumer EJectroPlcs Assodatlon
www.CLorg/safety
5
Supplied Accessories
Check the supplied accessories before installation.
In case of missing or damaged, please contact the dealer immediately.
User Manual Remote Control Two AAA Batteries Power Cord
Preparation
Remote control Batteries Installation
1. Slide open the battery compartment cover in the direction of the arrow.
2. Insert two AAA batteries. Make sure the polarities match the indication
inside the battery compartment.
3. Slide to close the battery compartment cover until it clicks.
CAUTION:
• Do not insert batteries with '+' and '-' polarities reversed as this may cause the batteries to swell or rupture resulting in leakage.
• Never mix used and new batteries in the device.
• Replace all the batteries in the device at the same time.
• Remove the batteries ifthe remote control is not going to be used for an extended period of time.
Using the remote control
Point the remote control directly at your TV, within a 30 ° angle horizontally (15 ° to either side), and within 30 ° vertically of the
remote control sensor on the front of your TV and within 26.25 feet (8 m) of your TV.
T£:'
/15°t15 °_,
CAUTION:
• DO not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types.
• Objects between the remote control and the remote control sensor may block the remote control signal.
• The range of the remote control may be diminished if direct sunlight or other strong light is shining on the remote control sensor. In this case,
change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor.
6
Preparation
Positioning the TV Set
Place the TV on a firm and flat surface, leaving a space of at least 10cm around the set and 30cm from the top of the set to watt.
Removing the stand
• Before mounting the TV on the wall, the TV stand must be removed.
• Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal.
• For walt bracket installation, please refer to the Installation Manual of the Wall Bracket Unit.
1 2
t
TV STAN D
Unfasten the ten screws used to secure
the stand in place.
TVSTANOt
Remove the TV stand with two hands.
7
Functional Overview
Front Panel
O Remote control sensor
Receives signal from the remote control.
Power indicator
Lights up in red when the TV is in standby mode.
Lights up in blue when the TV is turned on.
Side Panel
Head Phone jack
Connect to head phones.
_G"q
Gj ¸
_ii @
MENU
Press to enter or exit from the TV menu.
@
INPUT
Press to select TV, HDMI 1, HDMI2, AVl(Video),
AV2(Video), AV3, RGB, AVl(S-Video), or
AV2(S-Video) inputs.
O Volume Up/Down (VOL+/-)
Press to adjust the volume.
Left/Right Cursor (4 / _ )
Press to select or adjust the desired item on the TV menu.
HDMI2 Input terminal
Connect to equipment with HDMI output.
HDMI Input from a DVI source will not have
sound.
0
Channel Up/Down (OH+l-)
Press to select previous/next channel.
Up/Down Cursor (A/T)
Press to select or adjust the desired item on the TV menu.
O AV2 Input terminal
Connect to equipment with S-video or audio/video
output.
_) POWER
Press to turn the TV power on or off.
Rear Panel
.... ...............l__< }
®
®
®
®
AC Input terminal
Connect to the wall outlet, using the supplied
Power Cord.
HDMI Input terminal
Connect to equipment with HDMI output.
HDMI Input from a DVI source will not have
sound.
AV3 Input terminals
Connect to equipment with component output.
Audio Output terminal
Connect to equipment with audio input. This audio
level is fixed and cannot be adjusted using TV
volume control.
® AVl Input terminal
Connect to equipment with audio/video output.
® Digital Audio Output terminal
Connect to a equipment with digital audio input.
® RGB Input terminal
Connect to PC.
® USB terminal
For service use only.
®
AIR/CABLE Input terminal
Connect to equipment with antenna output or wall
antenna cable.
8
Remote control
0
0
0
0
0
O
Power On/Standby (_/I)
Press to turn the TV on or off.
ASPECT (_)
Press to select the desired picture format.
INPUT ( G )
Press to select TV, HDMI 1, HDMI2, AVl(Video),
AV2(Video), AV3, RGB, AVl(S-Video), or
AV2(S-Video) inputs.
TV
Press to change to TV mode viewing.
MTS/SAP
Press to select Mono, Stereo or SAP mode.
Channel Select (Numeric Keys)
Press to select the TV channel directly.
@
Dash (-)
Press to view digital sub channels. First enter the
main channel number, then press this button, then
enter the sub-channel number.
O
O
@
Menu ((_))
Press to enter or exit from the TV menu.
Picture Mode (-.",_,'-)
Press to select the desired picture mode.
Sound Mode ( j_)
Press to select the desired sound mode.
_) INFO
Press to display the current channel/program
information.
CO
Select between Closed Caption modes.
_) Last Channel (LAST OH)
Press to return to previously viewed channel.
_) GUIDE
Press to display the Electronic Program Guide(EPG).
_) Up/Down Cursor ( A / T")
Press to select or adjust the desired item on the TV
menu.
_) FAV OH
Press to display your favorite channels list.
Channel Up/Down (OH A/OH v' )
Press to change up/down channel.
_) OK
Press to confirm and execute the selection.
_) Left/Right Cursor (4!_,)
Press to select or adjust the desired item on the TV
menu.
Mute (_<)
Press to mute or restore the volume.
_) Volume Up/Down (VOL+/-)
Press to adjust the volume.
9
Setting up your TV
Connecting an antenna, cable TV, or
satellite TV
m
To connect an external antenna, cable TV, or
satellite TV:
1 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the
AIR/CABLE jack on your TV (1).
2 Turn on your TV.
3 Press INPUT, then press A/Y to select TV.
Connecting a standard video device
Note
Your TV supports multiple video source inputs. For
temporary or easy-access video connections, use
the side jacks (AV2). For more permanent
connections, use the rear jacks (AVl).
,!i...................................
o,
ooooo;
® ®©
-Q
®
®
®
To connect a standard video device to the
AV1 jacks:
1 Plug an RCA video cable (4) into a standard
video source (5) and into the VIDEO jack (1)
on the back of your TV.
2 Plug the RCA audio cables (2) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV.
3 Turn on your TV.
4 Press INPUT, then press A/Y to select AVl
(Video).
To connect an external video device to the
AV2 jacks:
1 Plug the RCA video connector (8) into a
standard video device (5) and VIDEO jack (6)
on the side of your TV.
2 Plug the RCA audio connectors (7) into the
audio out jacks on the video device and into
the AUDIO L and AUDIO Rjacks (6) on the
side of your TV.
3 Turn on your TV.
4 Press INPUT, then press A/V to select AV2
(Video).
10
To connect a standard S-Video device to AV1
jacks:
1 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO jack (1) on the back of your TV.
2 Plug RCA audio cables (2) into the S-Video
device audio output jacks and into the AUDIO
L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT and A/V to select AVl(S-Video).
To connect a standard S-Video device to AV2
jacks:
1 Plug an S-Video cable (9) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO jack (6) on the back of your TV.
2 Plug RCA audio cables (7) into the S-Video
device audio output jacks and into the AUDIO
L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT and A/Y to select AV2(S-Video).
Connecting a component video device
To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Plug a component video cable (2) into the
progressive-scan or HDTV video device (3)
and into the Y/Pb/Pr jacks (1) on the back of
your TV.
2 Plug the RCA audio cables (4) into the audio
out jacks on progressive-scan or HDTV video
device and into the lower AUDIO L and
AUDIO R jacks (1) on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press A/Y to select
AV3.
Connecting a digital audio input
You can connect your TV audio out to a digital
amplifier.
®
To connect to an amplifier equipped with a
digital audio input:
• Plug a coaxial cable (2) into the amplifier (3)
and into the COAXIAL OUTPUT jack (1) on
the back of your TV.
11
Connecting a computer
@
To connect a computer using VGA:
1 Plug a VGA cable (4) intothe VGA port on
the computer (6) and into the RGB INPUT
port on the back of your TV.
2 Plug an audio cable (5) into the audio jack on
the computer (6) and into the AUDIO RGB
INPUT port on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press A/V to select RGB.
To connect to a computer or other HDMI
device using the HDMI1 jack:
1 Plug an HDMI cable (2) into the HDMI port on
the HDMI device (3) and into the HDMI1
INPUT port on the back of your TV.
2 Turn on your TV.
3 Press INPUT, then press A/Y to select
HDMI1.
To connect to a computer or other HDMI
device using the HDMI2 jack:
1 Plug an HDMI cable (8) into the HDMI port on
the HDMI device (3) and into the HDMI2
INPUT port on the side of your TV.
2 Turn on your TV.
3 Press INPUT, then press A/V to select
HDMI2.
Note
When the computer goes into standby, TV shows
"No Sync" message and will never turn off.
Using the basic controls
Turning
To turn your TV on and off:
1 Press POWER on the side of your TV or on
the remote control. The power indicator turns
blue.
2 To turn off your TV, press POWER again. The
power indicator turns red.
Adjusting the volume
You can adjust the volume using the controls on
your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound, then press
this button again to restore the sound.
Changing the video mode
Your TV supports multiple video modes.
To select the video mode:
• Press INPUT one or more times to select the
video mode, then press OK. You can select:
• TV
• HDMI1
• HDMI2
• AVl(Video)
• AV2(Video)
• AV3
• RGB
• AVl(S-Video)
• AV2(S-Video)
the TV on and off
Using your TV
Selecting the TV signal source
To select the TV signal source:
1 Press MENU, then press 4/!1_ to highlight
Channel icon. The Channel menu opens.
Channel
TV Source Cable
Auto Scan J_
Favorites
List J_
Channel No. 1-2
Channel Label Sencore
DTV Signal Strong
2
3
Press V to enter the Channel menu.
Press A/V to select TV Source, then press
4 / _ to select Air or Cable.
• Air-VHF/UHF channels.
12
• Cable-Cable TV channels.
4 Press MENU one or more times to close
the menu.
Changing channels
To
change channels:
Press the OH+ or OH- on the side of your TV
or the OH A or OH Y on the remote
control.
To enter a channel number directly:
• Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub. (minor) channels.
Press the number buttons to enter the main
channel, press the - button (to the left of the 0
button), then press the number button for the
sub-channel. For example, if you want to
watch channel 5-2, press 5, press the -
button, then press 2.
To go to the previous channel:
• Press LASTCH.
Using the on-screen menus
Use your remote control to navigate in the
on-screen menus.
To use the on-screen menus:
1 Press INPUT on the remote control to select
the video source.
2 Press MENU on the remote control. The
on-screen menu appears.
3 Press _/_ to highlight the Video, Audio,
Channel, Timers, Locks, or Setup icon,
then press V to enter the menu.
4 Press A/V to highlight a setting, then press
4/_ to change the setting.
5 Press MENU one or more times to close the
menu.
Scanning Channels
To select channels with the OH buttons, your TV
first needs to scan the channels. When your TV
scans channels, it scans for channels with
signals, then stores the channel information into
memory.
To automatically scan channels:
1 Press MENU on the remote control, then
press 4/_ to highlight Channel icon. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan 11_
Favorites II_
List t_"
Channel No. 1-2
Channel Label Sencore
DTV Signori _÷;_ Strong
2 Press Y to enter the Channel menu.
3 Press A/Y to select Auto Scan, then
press _. The Auto Scan sub-menu opens.
Channel
an _[i
Digital Channels
Analog Channels I1_
4
5
Press ,&/V to select the type of auto scan
you want:
• Scan all
• Digital Channels
• Analog Channels
Then press ll_ to start the auto scan. Your
TV scans for and memorizes all channels
available in your area.
To stop the auto search, press MENU.
When auto search is finished, the channel
changes to the first channel in the memorized
channel list.
i.........................................................................................................................................................................................................................................................................................................................................................................................................................
ii.0te
The Channel List cannot be updated by only
i changing the cable source. Auto Scan must be
..................................per!°!med!°! !heChanne!L!s!t° beupda!ed:....................................
IMPORTANT NOTICE
United States federal law requires broadcasters to stop transmittin(
analog (non-digital) television signals after February 17, 2009.
Accordingly, this TV's analog tuner will not be capable of receiving
over-the-air analog television broadcasts after such analog
broadcasts are no longer available.
After February 17, 2009, this TV's analog tuner will continue to
work with compatible cable and satellite TV systems, gaming
consoles, VCRs, DVD players and other similar products.
Both before and after February 17, 2009, this TV's digital tuner will
receive available over-the-air digital television broadcasts using an
antenna and other digital television broadcasts using compatible
cable, satellite or other digital television system connections.
Please review this Operating Guide for further information
regarding such connections.
Hitachi supports the D TV transition and as a member of the D TV
Transition Coalition urges consumers to visit these web sites for
interactive guides and further detailed information:
• www.dtvtransition.org • www.dtv2OO9.gov
• www.myceknowhow.com • www.youtube.com
13
Manually editing channels
To skip a channel:
1 Make sure that you have Auto Scanned for
channels.
2 Press MENU on the remote control, then
press 4/_ to highlight Channel. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan J_
Favorites
List
Channel No. 1-2
Channel Label Sencore
DTV Signal Strong
3
4
Press V to enter the Channel menu.
Press A/V to select List, then press
_. The List sub-menu opens.
5 Press A/Y to select a channel you want to
skip, then press OK. The check mark next to
channel disappears and the screen turns
black.
6 Press OK again to show the channel.
The check mark appears, and the screen
shows the channel.
Viewing channel information
To view channel information:
1 In digital TV mode, select a channel you want
to watch.
2 Press INFO once to display information about
the channel.
3 Press INFO again to display information about
the program content (if available).
Adding favorite channels
To add channels to the favorite channel list:
1 Press MENU on the remote control, then
press 4/_" to highlight Channel. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan J_
Favorites J_
List J_
Channel No. 1-2
Channel Label Sencore
DTV Signal _ Strong
2 Press V to enter the Channel menu.
3 Press A/Y to select Favorites, then press
I_. The Favorites sub-menu opens.
Channel
4
5
6
To
1
2
Press A/Y to select a channel that you want
to add to the favorite channel list.
Press OK. A check mark appears next to
the channel, and the channel is marked as a
favorite.
Repeat this procedure to select the other
channels.
select your favorite channel:
Press FAV OH one or more times on the
remote control until the Favorite List appears
on the screen.
Press A/Y to select the preset for your
favorite channel.
Note
The favorite channel function does not work until
you have programmed your favorite channels.
14
4 Press INFO again to close.
To remove a channel from the favorite
channel list:
1 Press MENU on the remote control, then
press _/_ to highlight Channel. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan I_
Favorites
List _*
Channel No. 1-2
Channel Label Sencore
DTV Signal Strong
2 Press V to enter the Channel menu.
3 Press A/Y to select Favorites, then press
II_. The Favorites sub-menu opens.
Channel
4 Press ,&/Y to select the channel you want to
remove.
5 Press OK. The check mark next to the
channel disappears, and the channel is
removed from favorite channel list.
Adjusting video settings
To adjust picture settings:
1 Press MENU on the remote control, then
press 4/_ to highlight the Video icon.
The Video menu opens.
Video
R6B Mode
Picture Mode Dynamic
Contrast 50
Brightness 45
Sharpness 60
Color Temperature Warm
Advanced
Aspect 16:9
2
3
TVMode
Video
Picture Mode Dynamic
Contrast 60
Brightness 29
Color 75
Tint O
Sharpness 70
Color Temperature Cool
Aspect 16:9
Noise Reduction Off
Press Y to enter the Video menu.
Press A/V to select one of the following
settings, then press _/_ to change the
setting. You can select:
• Picture Mode-Standard, Dynamic, Soft,
or Personal.
• Contrast
• Brightness
• Color
• Tint
• Sharpness
• Color Temperature-Normal, Warm, or
Cool.
• Advanced-When Advanced ishighlighted,
press _ to open the advanced menu.
• H-Pos (RGB mode only)
• V-Pos (RGB mode only)
• Clock (RGB mode only)
• Phase (RGB mode only)
• Auto (RGB mode only)-Press I!_ to
activate the auto adjust feature for RGB
mode.
• Aspect-4:3, 16:9, Zoom1, Zoom2 or
Expanded. (In RGB mode, only 4:3 and
16:9 are available for Aspect.)
• Noise Reduction-Off, Low, Medium,
High or Auto.
If the TV is operating in a weak-signal area,
sometimes the Noise Reduction function can
improve the reception.
Press MENU one or more times to close
the menu.
Note
Any adjustments made to Contrast, Brightness,
Color, Tint and Sharpness while in the Standard,'
Dynamic, or Soft Picture Modes will automatically
be saved in the Personal Picture Mode Setting. ::
Additionally, when adjustments are made the TV
will automatically switch to the Personal Picture
Mode.
15
Adjusting audio settings
To adjust audio settings:
1 Press MENU on the remote control, then
press _1/_ to highlight the Audio icon.
The Audio menu opens.
RGBMode
Audio
Sound Mode
Bass
Treble
Balance
Preferred Lang_age
Digital O_ tput
Surround Sound
Audio Only
TVMode
Standard
50
50
0
English
PCM
Off
Off
Using the Electronic Program Guide
Your TV has an Electronic Program Guide (EPG)
that supplies information, such as program lists
and start and end times for programs. In
addition, detailed information about the program
is often available in the EPG. (The availability
and the amount of program details will vary
depending on the broadcaster.)
To use the EPG:
1 In digital TM mode, select a channel you want
to watch.
2 Press GUIDE on the remote control. The
EPG opens with the channel that is currently
active.
2
3
4
Audio
Sound Mode Standard
Bass 50
Treble 50
Balance 0
Preferred Language English
Digital Output PCM
Surround Sound Off
Audio Only Off
Press Y to enter the Audio menu.
Press A/V to select one of the following
settings, then press 4/_ to change the
setting. You can select:
• Sound Mode- Standard, Music, Movie,
Sports, or Personal.
• Bass
• Treble
• Balance
• Preferred Language-English, French, or
Spanish. (Digital TV mode only)
• MTS-Mono, Stereo, or SAP.
(Analog TV mode only)
• Digital Output-PCM or RAW.
• Surround Sound-On or Off.
• Audio only-On or Off. (If you select "On",
the image disappears but the sound
remains. Press any button to resume the
image.)
Press MENU one or more times to close
the menu.
Note
Any adjustments made to Bass, Treble, and
Balance while in the Standard, Music, Movie,
and Sports Sound Modes will automatically
be saved in the Personal Sound Mode Setting.
Additionally, when adjustments are made the TV
will automatically switch to the Personal Sound
Mode.
3
4
5
By repeatedly pressing A/T, the information
for additional future programs can be
displayed.
Press _ / _- to select the previous/next
channel.
Press GUIDE one or more times to close the
EPG.
Changing the channel settings
To change channel settings:
1 Press MENU on the remote control, then
press 4/_ to highlight Channel. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan
Favorites
List _"
Channel No. 1-2
Channel Label Sencore
DTV Signal _Jf_9/_ Strong
2
3
Press V to enter the Channel menu.
Press A/Y to select one of the following
settings, then press 4/_ to change the
setting. You can select:
16
• TV Source-Air or Cable.
• Auto Scan-For more information, see
"Scanning Channels" on page 13.
• Favorites-For more information, see
"Adding favorite channels" on page 14.
• List-For more information, see
"Manually editing channels" on page 14.
• Channel No.-Press ,_/ll_ to select the
channel.
• Channel Label-For more information, see
"Adding a channel label" on this page.
• DTV Signal-Display the signal strength
of the Digital TV.
Press MENU one or more times to close
the menu.
Adding a channel label
To add a channel label:
1 Press MENU on the remote control, then
press 4/_ to highlight Channel. The
Channel menu opens.
Channel
Adjusting timers settings
To adjust timers settings:
1 Press MENU on the remote control, then
press 4/_" to highlight the Timers icon. The
Timers menu opens.
R6B Mode
Timers
Sleep Timer -- Min
Time Zone Pacific
DST Off
Time Format 12-hour
Clock ------#--#--------:--
TV Mode
2
3
TV Source Cable
Auto Scan
Favorites
List
Channel No. 1-2
Channel Label Sencore
DTV Signal Strong
Press Y to enter the Channel menu.
Press A/V to select Channel Label, then
press _ to enter the Channel Label
sub-menu.
Press 4/1_ to move the cursor, then press
A/V one or more times to select each
character of the new name for the channel.
Press MENU one or more times to close
the menu.
Timers
Sleep Timer -- Min
Time Zone Pacific
DST Off
Time Format 12-hour
Clock 2008/09/17 08:00 PM
2
3
4
Press Y to enter the Timers menu.
Press A/Y to select one of the following
settings, then press 4/_" to change the
setting. You can select:
• Sleep Timer-Select the sleep time you
want.
• Time Zone-Pacific, Alaska, Hawaii,
Atlantic, Eastern, Central, or Mountain.
• DST (Daylight Saving Time)-On or Off.
• Time Format-12-hour or 24-hour.
• Clock-Display the clock time.
Press MENU one or more times to close
the menu.
. ........... !
Note
• Clock can only display the clock time when on a
digital channel and the time information is
available.
• 30 seconds before the Sleep Timer turns off the
TV, the Sleep timer counts down and shows the
remaining seconds until the timer turns off the TV.
° If a power failure occurs or the TV is unplugged,
all the times will be reset.
17
Adjusting Setup settings
To adjust setup settings:
1 Press MENU on the remote control, then
press 4/_" to highlight the Setup icon.
The Setup menu opens.
RGBMode
Setting the closed caption mode
To set the closed caption mode:
1 Press MENU on the remote control, then
press _/_ to highlight the Setup icon.
The Setup menu opens.
TV Mode
Setup
Menu Language English
Transparency 50%
OSD Time Out 15 Sec.
Closed Captions
Restore Default _-
TVMode
Setup
Menu Language English
Transparency 50%
OSD Time Out 15 Sec.
Closed Captions
Restore Default 11_
2 Press V to enter the Setup menu.
3 Press A/V to select one of the following
settings, then press 4/I_ to change the
setting. You can select:
• Menu Language-English, Fran_ais, or
Espa5ol.
• Transparency-Adjust the menu
transparency.
• OSD Time Out-Adjust the display time of
the OSD menu.
• Closed Captions-See "Setting the closed
caption mode" on this page.
• Restore Default-Select Yes, then press
OK to restore your TV to the default
settings.
4 Press MENU one or more times to close
the menu.
Setup
Menu Language English
Transparency 50%
OSD Time Out 15 Sec.
Closed Captions
Restore Default I1_
2
3
_£__1_ MENU
Press Y to enter the Setup menu.
Press A/Y to highlight Closed Captions,
then press I1_to enter the Closed Captions
sub-menu. The Closed Captions sub-menu
opens.
Setu p
Basic Selection CC 1
Advanced Selection Service1
Options I_
4 Press ,il,/V to select one of the following
settings, then press 4/11_ to change the
setting. You can select:
• CC Mode-CC Off, CC On, or CC On
Mute.
• Basic Selection-Off, CCl, CC2, CC3,
CC4, Text1, Text2, Text3, or Text4.
• Advanced Selection-Service1,
Service2, Service3, Service4, Service5,
Service6, or Off.
• Options-See "Setting the closed caption
styles" on page 19.
5 Press MENU one or more times to close
the menu.
18
Setting the closed caption styles
To set the closed caption styles:
1 Press MENU on the remote control, then
press 4/_ to highlight the Setup icon.
The Setup menu opens.
Setup
TVMode
Menu Language English
Transparency 50%
OSD Time Out 15 Sec.
Closed Captions _"
Restore Default
2
3
Press Y to enter the Setup menu.
Press A/Y to highlight Closed Captions,
then press _ to enter the Closed Captions
sub-menu. The Closed Captions sub-menu
opens.
Setup
Basic Selection CC 1
Advanced Selection Service1
Options _"
4 Press A/V to select Options, then press
to enter the Options sub-menu. The Options
sub-menu opens.
6
• Mode-Custom or Default. (If Default is
selected, the other settings are not
available.)
• Font Style-Default, Font0, Font1,
Font2, Font3, Font4, Font5, Font6, or
FontT.
• Font Size-Default, Normal, Large, or
Small.
• Font Edge Style-Default, None, Raised,
Depressed, Uniform, Left Shadow, or
Right Shadow.
• Font Edge Color-Default, Black, White,
Red, Green, Blue, Yellow, Magenta, or
Cyan.
• FG Color-Default, White, Black, Red,
Green, Blue, Yellow, Magenta, or Cyan.
• BG Color-Default, Black, White, Red,
Green, Blue, Yellow, Magenta, or Cyan.
• FG Opacity-Default, Solid, Flashing,
Translucent, or Transparent.
• BG Opacity-Default, Solid, Flashing,
Translucent, or Transparent.
Press MENU one or more times to close
the menu.
Setting the parental controls
To set the parental controls:
1 Press MENU on the remote control, then
press 4/_ to highlight the Locks icon. The
Enter Password screen opens.
Locks
Enter Password
Setup
Font SUe DefaL It
Font Size DefaL It
Font Edge SUe DefaL It
Font Edge Color Defat It
FG Color Default
BG Color Default
FG Opacity Default
BG Opacity Default
Press A/V to select one of the following
settings, then press 4/1_ to change the
setting. You can select:
2
3
Press Y to enter the Enter Password screen.
Enter the password with the number buttons
on the remote control (the default password
is 0000). The Locks menu opens.
Locks
System Lock On
Input Block
US
Canada
RRT Setting
Reset RRT
19
Press A/V to select one of the following
settings, then press 4/1_ to change the
setting. You can select:
• Change Password-For more information,
see "Changing the password" on this page.
• System Lock-On or Off. (Input Block,
US, Canada, RRT setting, and Reset
RRT are only available when System
Lock is set to On.)
• Input Block-To block the input source.
• US (United States)-For more information
see "Setting the parental control level - US
TV ratings" on page 21.
• Canada-For more information, see
"Setting the parental control level -
Canadian ratings" on page 23.
• RRT Setting-For more information, see
"Setting the parental control level - RRT
ratings" on page 24.
• Reset RRT-Select Yes, then press
OK to reset the RRT to the default settings.
Press MENU one or more times to close
the menu.
Note
If you forgot your password, enter 9999 to disable
Lock and set a new password.
Changing the password
To change the password:
1 Press MENU on the remote control, then
press 4/_ to highlight the Locks icon. The
Enter Password screen opens.
Locks
Enter Password
2
3
Press V to enter the Enter Password screen.
Enter the password with the number buttons
on the remote control (the default password
is 0000). The Locks menu opens.
4
Press A/V to highlight Change Password,
then press _ to open the Change Password
sub-menu.
5 Press the number buttons to input the old
password (if you have not set a password,
enter 0000; if you forgot the password, enter
9999). The cursor moves to the Enter New
Password column.
6 Press the number buttons on the remote
control to input the new password. The cursor
moves to the Confirm Password column.
7
Blocking
Press number buttons to input the new
password again.
an input source
To
1
block an input source:
Press MENU on the remote control, then
press 4/_ to highlight the Locks icon. The
Enter Password screen opens.
Locks
Enter Password
2
3
Press V to enter the Enter Password screen.
Enter the password with the number buttons
on the remote control (the default password
is 0000). The Locks menu opens.
System Lock On
Input Block
US
Canada
RRT Setting
Reset RRT
System Lock On
Input Block
US
Canada
RRT Setting
Reset RRT
2O
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Hitachi L32A102 Owner's manual

Hitachi
Brand
Hitachi
Model
L32A102
Category
LCD TVs
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents