2. Home
  3. Do-It-Yourself tools
  4. Power tools
  5. Paint Sprayer
  6. Graco
  7. 3A1309B

Graco 3A1309B, 3A1309B - RoadPak Gun Stencil Kit Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Graco 3A1309B Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum working pressure of the Graco RoadPak Gun Stencil Kit?
    Can this kit work in conjunction with a hand bead gun?
    How many lock nuts are included in the kit?
    What size is the RAC 5 guard?
    What is the length of the coupled hose?
Instructions
Paint Gun Stencil Kit for Line Striping
System
Model 24G778, Series A
3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure
Important Safety Instructions
For complete warnings and safety instructions see RoadLazer
™
RoadPak
™
Line Striper System manual. Save these instructions.
ti16518a
ti109493c
3A1309B
EN
Pressure Relief Procedure
The system pressure must be manually relieved to pre-
vent the system from starting or spraying accidentally.
Fluid under high pressure can be injected through the
skin and cause serious injury. To reduce the risk of an
injury from injection, splashing fluid, or moving parts,
follow the Pressure Relief Procedure in manual
3A1214 whenever you:
• are instructed to relieve the pressure
• stop spraying
• check or service any of the system equipment
• install or clean the spray tip
Works in conjuction with hand bead gun kit
P/N 238957
2 3A1309B
RoadPak Gun Stencil Kit Installation
1. Perform Pressure Relief Procedure before install-
ing (see manual 3A1214).
Parts List
1
3
4
5
6
7
8
2
ti16519a
Ref. Part Description Qty.
1 248157 FLEX GUN 1
2 249080 HOSE, coupled 1/4 x 50 ft 1
3 166969 GASKET 1
4 180137 NUT, gun 1
5 223718 TUBE, extension, 15.83 in. 1
6 180136 ADAPTER, tip 1
7 243161 GUARD, RAC 5 1
8 286425 SWITCH TIP, size 425 1
11 101566 NUT, lock 8
12 108851 WASHER, plain 8
13 16G776 BRACKET, hose wrap 4
14 516595 BOLT, hex, 3/4 in. 8
15 196177 NIPPLE, reducer 1
16 124490 FITTING, tee 1
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 3A1309
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2010, Graco Inc. is registered to ISO 9001
www.graco.com
Revised Fenruary 2013
/