Sanyo 3000 ANSI LUMENS PLC-XU305 Owner's manual

Category
Data projectors
Type
Owner's manual
Multimedia Projector
MODEL PLC-XU305
PLC-XU355
PLC-XU305K
PLC-XU355K
Owners Manual
Network Supported
□ WirelessLAN
IEEE802.11b/g
□ WiredLAN
100-Base-TX/10-Base-T
Memory Viewer
□ USBMemoryViewer

*
Refertotheowner’smanuals
belowfordetailsaboutnetwork
andmemoryviewerfunction.
■NetworkSet-upandOperation
■Memoryviewer
2
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
♦ Compact Design
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.31). Up to
UXGA resolution can be accepted.
Useful Functions for Presentations
- The digital zoom function allows you to focus on the
crucial information during a presentation (p.38).
- Blackboards* can be used as a projection screen.
*The board color is limited to Green (pp.35, 42).
Power Management
The Power management function reduces power
consumption and maintains the lamp life (p.53).
Lamp Control
Brightness of the projection lamp can be selected
(pp.27, 55).
Quick Termination
The AC power cord can be unplugged immediately
after turning off the projector without waiting for the
termination of the cooling fan rotation (p.21).
♦ Logo Function
The Logo function allows you to customize the screen
logo (pp.49-51). You can capture an image for the
screen logo and use it for the starting-up display or
between presentations.
♦ Multilanguage Menu Display
Operation menu is available in 17 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, Japanese and Thai (p.46).
Note:
The On-Screen Menu and figures in this manual may differ slightly from the product.
The contents of this manual are subject to change without notice.
♦ Security Function
The Security function helps you to ensure security
of the projector. With the Key lock function, you can
lock the operation on the top control or remote control
(p.55). PIN code lock function prevents unauthorized
use of the projector (pp.21, 56–57).
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
LAN Network Function
This projector is loaded with the Wired and Wireless
LAN network function. You can project an image on a
computer as well as operate and manage the projector
via network. For details, refer to the owner’s manual
“Network Set-up and Operation.”
Memory Viewer Function
Insert the dedicated USB memory into the projector to
project images or presentation data stored within. You
do not have to carry computers or other equipment for
a presentation.
*USB memory is not supplied with the projector. For
details, refer to the owner’s manual of "Memory
viewer".
Auto setup Function
This function enables Input search, Auto Keystone
correction and Auto PC adjustment by simple pressing
the AUTO SETUP/CANCEL button on the top control
(p.47).
Colorboard Function
At the time of simple projection on the colored wall,
you can get the close color image to the color image
projected on a white screen by selecting the similar
color to the wall color from the preset four colors.
Closed Caption
This is a printed version of the program sound or other
information displayed on the screen. You can turn on
the feature and switch the channels (p.54).
3
Table of Contents
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
Features and Design . . . . . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . . . . . .3
To the Owner. . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions. . . . . . . . . . . . . . . . . . . . .5
AirCirculation 6
InstallingtheProjectorinProperPosition6
MovingtheProjector 6
Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions . . . . . . . . . . . . . .8
Front 8
Back 8
Bottom 8
RearTerminal 9
TopControl 10
RemoteControl 11
LaserPointerFunction 12
PointerFunction 12
WirelessMouseOperation 13
RemoteControlCode 13
RemoteControlBatteryInstallation 14
RemoteControlOperatingRange 14
AdjustableFeet 14
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . .15
PositioningtheProjector 15
ConnectingtoaComputer 16
ConnectingtoVideoEquipment17
ConnectingtoComponentVideoEquipment 18
ConnectingtheACPowerCord 19
Basic Operation . . . . . . . . . . . . . . . . . . . . . .20
TurningOntheProjector 20
TurningOfftheProjector 22
HowtoOperatetheOn-ScreenMenu 23
MenuBar 24
ZoomandFocusAdjustment 25
AutoSetupFunction 25
KeystoneCorrection 25
SoundAdjustment 26
RemoteControlOperation 27
Computer Input . . . . . . . . . . . . . . . . . . . . . .29
InputSourceSelection
(RGB:Computer1/Computer2(Analog))29
InputSourceSelection
(RGB(PCdigital),RGB(AVHDCP)) 30
ComputerSystemSelection 31
AutoPCAdjustment 32
ManualPCAdjustment 33
ImageModeSelection 35
ImageAdjustment 36
ScreenSizeAdjustment 37
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .39
InputSourceSelection(Video,S-video) 39
InputSourceSelection
(Component,RGBScart21-pin) 40
VideoSystemSelection 41
ImageModeSelection 42
ImageAdjustment 43
ScreenSizeAdjustment 45
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Setting 46
Information . . . . . . . . . . . . . . . . . . . . . . . . . 60
InputSourceInformationDisplay 60
Maintenance and Cleaning . . . . . . . . . . . . .61
WARNINGindicator 61
CleaningtheFilters 62
ResettingtheFilterCounter 62
AttachingtheLensCap63
CleaningtheProjectionLens 63
CleaningtheProjectorCabinet 63
LampReplacement 64
Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Troubleshooting 66
MenuTree 70
IndicatorsandProjectorCondition 72
CompatibleComputerSpecifications 73
TechnicalSpecifications 75
OptionalParts 76
PJLinkNotice 77
ConfigurationsofTerminals 78
PINCodeNumberMemo 79
USBThumbDriveCase79
Dimensions80
4
To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGECONSTITUTINGARISKOFELECTRIC
SHOCKISPRESENTWITHINTHISUNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATINGAND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL
WITHTHISUNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before installing and operating this projector, read this
manualthoroughly.
This projector provides many convenient features and
functions. Operating the projector properly enables
youtomanage those featuresandmaintainsitin good
conditionformanyyearstocome.
Improperoperationmayresultinnotonlyshorteningthe
product-life, but also malfunctions,fire hazard, or other
accidents.
Ifyourprojectorseemstooperateimproperly,readthis
manualagain, checkoperations and cableconnections
and try the solutions in the “Troubleshooting” section
in the back of this booklet. If the problem still persists,
contactthedealerwhereyoupurchasedtheprojectoror
theservicecenter.
Safety Precaution
CAUTION
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN OR A DISASTER. IF THE PROJECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.
READ AND KEEP THIS OWNER'S MANUAL FOR
LATER USE.
WARNING: ●THISAPPARATUSMUSTBEEARTHED.
●TOREDUCETHERISKOFFIREOR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
–Thisprojectorproducesintenselightfromtheprojection
lens. Do not stare directly into the lens, otherwise eye
damagecouldresult.Beespeciallycarefulthatchildren
donotstaredirectlyintothebeam.
–Installtheprojectorinaproperposition.Otherwiseitmay
resultinfirehazard.
–Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper
air circulation and cooling of the unit. The dimension
shown here indicate the minimum space required.
If the projector is to be built into a compartment or
similarly enclosed, these minimum distances must be
maintained.
–Do not cover the ventilation slot on the projector. Heat
build-up can reduce the service life of your projector,
andcanalsobedangerous.
–Iftheprojectorisunusedforanextendedtime,unplug
theprojectorfromthepoweroutlet.
–Donotprojectthesameimageforalongtime.The
afterimagemayremainontheLCDpanelsbythe
characteristicofpanel.
SIDEandTOP REAR
CAUTION
NotforuseinacomputerroomasdefinedintheStandard
fortheProtectionofElectronicComputer/DataProcessing
Equipment,ANSI/NFPA75.
Ne peut être utilisé dans une salle dordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard
for Protection of Electronic Computer/Data Processing
Equipment.
The symbol mark and recycling systems described below
apply to EU countries and do not apply to countries in other
areasoftheworld.
Your productis designed and manufactured with high quality
materials and components which can be recycled and/or
reused.
Thesymbolmarkmeansthatelectricalandelectronic
equipment, batteries and accumulators, at their end-oflife,
shouldbedisposedofseparatelyfromyourhouseholdwaste.
Note:
If a chemical symbol is printed beneath the symbol mark,
this chemical symbol means that the battery or accumulator
containsaheavymetalatacertainconcentration.Thiswillbe
indicatedasfollows:Hg:mercury,Cd:cadmium,Pb:lead
IntheEuropean Union there are separatecollectionsystems
forusedelectricalandelectronicequipment,
batteriesandaccumulators.
Please,disposeofthemcorrectlyatyourlocal
communitywastecollection/recyclingcentre.
Please,helpustoconservetheenvironment
welivein!
0.7’(20cm)
1.5’(50cm) 3’(1m) 3’(1m)
20cm
50cm 1m 1m
5
Safety Instructions
All the safety and operating instructions should be read
beforetheproductisoperated.
Read all of the instructions given here and retain them
forlateruse.UnplugthisprojectorfromACpowersupply
before cleaning. Do not use liquid or aerosol cleaners.
Useadampclothforcleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
preventdamageduetolightningandpowerlinesurges.
Do not expose this unit to rain or use near water... for
example,inawetbasement,nearaswimmingpool,etc...
Do not use attachments not recommended by the
manufacturerastheymaycausehazards.
Do not place this projector on an unstable cart, stand,
or table. The projector may fall, causing serious injury
to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions,
and sh o uld use a mou n ting ki t a p prov e d b y t h e
manufacturers.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
andcartcombinationtooverturn.
Slotsandopeningsinthebackandbottomofthecabinet
areprovidedforventilation,toensurereliableoperationof
theequipmentandtoprotectitfromoverheating.
Theopeningsshouldneverbecoveredwithclothorother
materials,andthebottomopeningshouldnotbeblocked
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed
nearoroveraradiatororheatregister.
Thisprojectorshouldnotbeplacedinabuilt-ininstallation
suchasabookcaseunlessproperventilationisprovided.
Neverpushobjectsofanykindintothisprojectorthrough
cabinetslotsastheymaytouchdangerousvoltagepoints
or short out parts that could result in a fire or electric
shock.Neverspillliquidofanykindontheprojector.
Donotinstalltheprojectorneartheventilationductof
air-conditioningequipment.
This projector should be operated only from the type
of power source indicated on the marking label. If you
arenotsureofthetypeofpowersupplied,consultyour
authorizeddealerorlocalpowercompany.
Donotoverloadwalloutletsandextensioncordsasthis
canresultinfireorelectricshock.Donotallowanything
to rest on the power cord. Do not locate this projector
wherethecordmaybedamagedbypersonswalkingon
it.
Do not attempt to service this projector yourself as
opening or removing Covers may expose you to
dangerousvoltageorotherhazards.Referallservicing
toqualifiedservicepersonnel.
Unplugthisprojectorfromwalloutletandreferservicing
to qualified service personnel under the following
conditions:
a.Whenthepowercordorplugisdamagedorfrayed.
b.Ifliquidhasbeenspilledintotheprojector.
c.Iftheprojectorhasbeenexposedtorainorwater.
d.Iftheprojectordoesnotoperatenormallybyfollowing
the operating instructions.Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualifiedtechniciantorestoretheprojectortonormal
operation.
e.If the projector has beendropped orthe cabinethas
beendamaged.
f.Whentheprojectorexhibitsadistinctchangein
performance-thisindicatesaneedforservice.
When replacement parts are required, be sure the
servicetechnicianhasusedreplacementpartsspecified
bythemanufacturerthathavethesamecharacteristics
as the original part. Unauthorized substitutions may
resultinfire,electricshock,orinjurytopersons.
Upon completion of any service or repairs to this
projector, ask the service technician to perform routine
safety checks to determinethat the projectoris in safe
operatingcondition.
NOTE FOR CUSTOMERS IN THE US
HgLAMP(S)INSIDETHISPRODUCTCONTAIN
MERCURYANDMUSTBERECYCLEDORDISPOSED
OFACCORDINGTOLOCAL,STATEORFEDERAL
LAWS.
6
Safety Instructions
Openingsinthe cabinetareprovidedfor ventilation.To
ensurereliableoperationoftheproductandtoprotectit
from overheating, these openings must not be blocked
orcovered.
CAUTION
Hotairisexhaustedfromtheexhaustvent.Whenusing
or installing the projector, the following precautions
shouldbetaken.
–Donotputanyflammableobjectorspraycannearthe
projector,hotairisexhaustedfromtheairvents.
–Keeptheexhaustventatleast3’(1m)awayfromany
objects.
–Do not touch a peripheral part of the exhaust vent,
especiallyscrewsandmetallicparts.Theseareaswill
becomehotwhiletheprojectorisbeingused.
–Donotputanythingonthecabinet.Objectsputonthe
cabinetwillnotonlygetdamagedbutalsomaycause
firehazardbyheat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperatureinsidetheprojector.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
–Donotdroporbumptheprojector,otherwisedamages
ormalfunctionsmayresult.
–Whencarryingtheprojector,useasuitablecarryingcase.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
abouttransportingtheprojectorbycourieroranyother
transportservice,consultyourdealer.
–Donotputtheprojectorinacasebeforetheprojectoris
cooledenough.
Moving the Projector
Whenmovingtheprojector,replacethelenscapand
retractadjustablefeettopreventdamagetothelensand
cabinet.
Whentheprojectorisnotinuseforanextendedperiod,
putitintoasuitablecasewiththelenssideup.
Air Circulation
AirIntakeVent
AirintakeVent
ExhaustVent
(Hotairexhaust)
AirIntakeVent
Donottilttheprojectormorethan20
degreesfromsidetoside.
Donotpointtheprojectoruptoprojectan
image.
Donotpointtheprojectordowntoproject
animage.
Donotputtheprojectoroneithersideto
projectanimage.
Install the projector properly. Improper Installation may
reducethelamplifeandcauseafirehazard.
Installing the Projector in Proper Position
ExhaustVent
(Hotairexhaust)
Do not pitch the projector more than 30
degreesaboveandbelow.
30°
30°
7
Compliance
Federal Communications Commission Notice
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenceto radioor televisionreception, whichcan be
determinedbyturningthe equipmentoffandon,theuserisencouragedtotrytocorrecttheinterference by
oneormoreofthefollowingmeasures:
–Reorientorrelocatethereceivingantenna.
–Increasetheseparationbetweentheequipmentandreceiver.
–Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
–Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
UseofshieldedcableisrequiredtocomplywithclassBlimitsinSubpartBofPart15ofFCCRules.
Donotmakeanychangesormodificationstotheequipmentunlessotherwisespecifiedintheinstructions.If
suchchangesormodificationsshouldbemade,youcouldberequiredtostopoperationoftheequipment.
ModelNumber:PLC-XU305,PLC-XU355
TradeName:Sanyo
Responsibleparty:SANYOFISHERCOMPANY
Address :21605PlummerStreet,Chatsworth,California91311
TelephoneNo.:(818)998-7322
TheACPowerCordsuppliedwiththisprojectormeetstherequirementforuseinthecountryyoupurchasedit.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories(UL)andcertifiedbytheCanadianStandardAssociation(CSA).
ACPowerCordhasagrounding-typeAClineplug.Thisisasafetyfeaturetobesurethatthe
plugwillfitintothepoweroutlet.Donottrytodefeatthissafetyfeature.Shouldyoubeunable
toinserttheplugintotheoutlet,contactyourelectrician.
GROUND
AC Power Cord Requirement
AC Power Cord for the United Kingdom:
Thiscordisalreadyfittedwithamouldedplugincorporatingafuse,thevalueofwhichisindicatedonthepin
faceoftheplug.Shouldthefuseneedtobereplaced,anASTAapprovedBS1362fusemustbeusedofthe
samerating,markedthus
ASA
.Ifthefusecoverisdetachable,neverusetheplugwiththecoveromitted.Ifa
replacementfusecoverisrequired,ensureitisofthesamecolourasthatvisibleonthepinfaceoftheplug
(i.e.redororange).FusecoversareavailablefromthePartsDepartmentindicatedinyourUserInstructions.
Iftheplugsuppliedisnotsuitableforyoursocketoutlet,itshouldbecutoffanddestroyed.
Theendoftheflexiblecordshouldbesuitablypreparedandthecorrectplugfitted.
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
TheWiresinthismainsleadarecolouredinaccordancewiththefollowingcode:
Green-and-yellowEarth
Blue . . . . . . . . . . . Neutral
Brown . . . . . . . . . Live
Asthecoloursofthewiresinthemainsleadofthisapparatusmaynotcorrespondwiththecolouredmarkings
identifyingtheterminalsinyourplugproceedasfollows:
Thewirewhichiscolouredgreen-and-yellowmustbeconnectedtotheterminalintheplugwhichismarkedby
theletterEorbythesafetyearthsymbol orcolouredgreenorgreen-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
colouredblack.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
colouredred.
WARNING: THIS APPARATUS MUST BE EARTHED.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
8
Part Names and Functions
Front
Back
Infrared Remote Receiver
Zoom Ring
Focus Ring
Projection Lens
Lens Cap
(Seepage63forattaching.)

Speaker
Exhaust Vent
CAUTION
Hotairisexhaustedfromtheexhaustyivent.Donotput
heat-sensitiveobjectsnearthisside.
Lamp Cover
Air Intake Vent
USB Connector (Series B)
Terminals and Connectors
Top Controls and Indicators
LAN Connection Terminal
USB Connector (Series A)
Power Cord Connector
Filters
Adjustable Feet
Note:
LANConnectionTerminaland
USBConnector(Se
-
riesA)arefortheNetworkfunction.Refertotheowner’s
manual“NetworkSet-upandOperation”.
Kensington Security Slot
ThisslotisforaKensingtonlockusedtodetertheftofthe
projector.
*KensingtonisaregisteredtrademarkofACCOBrands
Corporation.
CAUTION
Donotturnonaprojectorwithlenscapattached.High
temperaturefromlightbeammaydamagelenscapand
resultinfirehazard.
Bottom
9
Part Names and Functions
Rear Terminal
S-VIDEO IN
ConnecttheS-VIDEOoutputsignalfromvideo
equipmenttothisjack(p.17).
AUDIO IN
Connecttheaudiooutputsignalfromvideo
equipmentconnectedto
ortothisjack.
Foramonoaudiosignal(asingleaudiojack),
connectittotheL(MONO)jack(p.17).
COMPUTER 1 / COMPUTER 2 AUDIO IN
Connecttheaudiooutput(stereo)froma
computerorvideoequipmentconnectedto
ortothisjack.(pp16,18)
VIDEO IN
Connectthecompositevideooutputsignalto
thisjack(p.17).
COMPUTER IN 1 / COMPONENT IN
Connectoutputsignalfromacomputer,RGBscart
21-pinvideooutputorcomponentvideooutputto
thisterminal(pp.16,18).
AUDIO OUT (VARIABLE)
Connectanexternalaudioamplifiertothisjack
(pp.16-18).
ThisterminaloutputssoundfromAUDIOIN
terminal(or).
MONITOR OUT
Thisterminalcanbeusedtooutputtheincoming
analogRGBsignalfromCOMPUTERIN2/DVI-I
terminalorCOMPUTERIN1/COMPONENTIN
terminaltotheothermonitor(p.16).
LAN Connection Terminal
ConnecttheLANcable(refertotheowner’smanual
“NetworkSet-upandOperation”).
USB Connector (Series B)
Inordertooperatethecomputerwiththeremote
controlandusethePAGE
▲▼buttonsonthe
remotecontrolduringapresentation,connectthe
USBportofthecomputertotheUSBterminalwith
aUSBcable(notsupplied)(p.16).
USB Connector (Series A)
ConnecttheUSBcable(refertotheowner’smanual
“NetworkSet-upandOperation”).
CONTROL PORT
Whentheprojectoriscontrolledbyacomputer,
connecttothisjackwithserialcontrolcable.
COMPUTER IN 2 / DVI-I
Connectcomputeroutput(Digital/AnalogDVI-Itype)
tothisterminal(p.16).
10
Part Names and Functions
Top Control
LAMP REPLACE indicator
Lightsyellowwhentheprojectionlampreachesits
endoflife(pp.64,72).
WARNING indicator
 –Lightsredwhentheprojectordetectsanabnormal
condition.
 –Blinksredwhentheinternaltemperatureofthe
projectorexceedstheoperatingrange(pp.61,72).
ON/STAND–BY button
Turntheprojectoronoroff(pp.20-22).
POWER indicator
 –Lightsredwhentheprojectorisinstand-bymode.
 –Lightsgreenduringoperations.
 –BlinksgreeninthePowermanagementmode
(p.53).
INPUT button
Selectaninputsource(pp.29-30,39-40).
MENU button
OpenorclosetheOn-ScreenMenu(p.23).
POINT ▲▼◄► (VOLUME +/–) buttons
 –SelectanitemoradjustthevalueintheOn-Screen
Menu(p.23).
 –PantheimageintheDigitalzoom+mode(p.38).
 –Adjustthevolumelevel(Point
◄►buttons)(p.26).
AUTO SETUP/CANCEL button
–Correctverticalkeystonedistortionandadjust
computerdisplayparameterssuchasFinesync.,
Totaldots,andPictureposition(pp.25,47).
–DisplaytheimageinUSBthumbdriveorreturnto
themenubarinMemoryViewermenu.
Refertotheowner'smanualof"Memory
Viewerfunction".
SELECT button
 –Executetheselecteditem(p.23).
 –ExpandorcompresstheimageintheDigitalzoom
mode(p.38).
WIRELESS indicator
Turngreenwhenthewirelesscommunicationis
establishedinthenetwork.
11
Part Names and Functions
NETWORK button

SelecttheNetworkinput.Seeowner'smanual“NetworkSet-upandOperation”and
owner'smanualof"Memoryviewer".
Note:
Toensuresafeoperation,pleaseobserve
thefollowingprecautions:
–Donotbend,drop,orexposetheremote
controltomoistureorheat.
–Forcleaning,useasoftdrycloth.Donot
applybenzene,thinner,spray,orany
chemicalmaterial.
Remote Control
ON/STAND-BY button
Turntheprojectoronoroff.(pp.20-22)
VIDEO button
SelecttheVIDEOinputsource.(p.39)
COMPUTER button
SelecttheCOMPUTERinputsource.(pp.29-30,40)
PAGE ▲▼buttons
Scrollbackandforththepagesonthescreenwhengivingapresentation.Touse
thesebuttons,connecttheprojectorandyourcomputerwithaUSBcable.(pp.9,16)
INFO. button
Operatetheinformationfunction.(p.60)
D.ZOOM ▲▼buttons
Zoominandouttheimages.(pp.27,38)
MENU button
OpenorclosetheOn-ScreenMenu.(p.23)
RESET/ON/ALL-OFF switch
When using the remote control,set this switch to “ON.” Setit to “ALL OFF” for
power savingwhen it is not used. Slidethisswitchto "RESET" to initialize the
remotecontrol code orswitchSpotlightand PointertotheLaserpointer function.
(pp.12-13)
IMAGE button
Selecttheimagemode.(pp.28,35,42)
MUTE button
Mutethesound.(p.26)
KEYSTONE button
Correctkeystonedistortion.(pp.25,48)
Point ▲▼◄►(VOLUME
+/–
)
buttons
–SelectanitemoradjustthevalueintheOn-ScreenMenu.(p.23)
–PantheimageintheDigitalzoom+mode.(p.38)
–Adjustthevolumelevel.(Point◄►buttons)(p.26)
NO SHOW button
Temporarilyturnofftheimageonthescreen.(p.28)
LASER button
–OperatetheLaserpointerfunction.Laserbeamisemittedwhilepressingthis
buttonwithin1minute.Whenusingthislaserpointerformorethan1minute,
releasetheLASERbuttonandpressitagain.(p.12)
–DisplaythePointeronthescreen.(p.12)
L-CLICK button
Actastheleftmousebuttonforwirelessmouseoperation.(p.13)
SIGNAL EMISSION indicator
Lightsredwhilethelaserbeamisbeingemittedfromthelaserlightwindowora
signalisbeingsentfromtheremotecontroltotheprojector.
FREEZE button
Freezethepictureonthescreen.(p.27)
LAMP button
Selectalampmode.(pp.27,55)
P-TIMER button
OperatetheP-timerfunction.(p.28)
R-CLICK button
Actastherightmousebuttonforwirelessmouseoperation.(p.13)
SELECT button
–Executetheselecteditem.(p.23)
– ExpandorcompresstheimageinDigitalzoommode.(p.38)
PRESENTATION POINTER button
Moveapointeroftheprojectororapointerforwirelessmouseoperation.(pp.12-13)
AUTO SET/CANCEL button
–CorrectverticalkeystonedistortionandadjustthePCdisplayparameters.(pp.25,47)
–DisplaytheimageinUSBthumbdriveorreturntothemenubarinMemoryViewer
menu.
Refertotheowner'smanualof"Memoryviewer".
LASER LIGHT window
Alaserbeamisemittedfromhere(p.12).
SCREEN button
Selectascreenmode.(pp.28,37,45)
12
Part Names and Functions
Spotlight
Pointer Function
Pointer
Laser Pointer Function
LASERbutton
PRESENTATIONPOINTER
button
This remote control emits a laser beam from the laser light window. Press the LASER button to activate the
laserpointer.Thesignalemissionindicatorlightsredandtheredlaserbeamisemitted.IftheLASERbuttonis
pressedformorethanoneminuteorifitisreleased,thelaserlightgoesoff.
ThelaseremittedisaClassIIlaser.Donotlookintothelaserlightwindoworpointthelaserbeamatyourselfor
otherpeople.Thefollowingisthecautionlabelforthelaserbeam.
CAUTION: Useofcontrols,adjustmentsorperformanceofproceduresotherthanthosespecifiedhereinmay
resultinhazardousradiationexposure.Neverlookdirectlyintothelaserlightwindowwhilealaser
isemitted,otherwiseeyedamagemayresult.
Thecautionlabelisputontheremotecontrol.
YoucanmovetheSpotlightorPointeroftheprojectorwiththeremotecontroltoemphasizeapartofthe
projectedimage.
Press and hold the MENU and NO SHOW buttons for
more than 5 seconds to activate the Pointer function.
(TheLaserpointerhasswitchedtothePointerfunction.)
1
PresstheLASERbuttonontheremotecontrolpointing
toward the projector. The Spotlight or Pointer is
displayedonthescreenwiththeLASERbuttonlighting
green. Then move the Spotlight or Pointer with the
PRESENTATIONPOINTERbutton.IftheLASERbutton
doesnotlightgreenandcontinuestoemitalaserbeam,
try the abovementioned procedure until the LASER
buttonlightsgreen.
2
To clear the Spotlight or Pointer out the screen, press
theLASERbuttonpointingtowardtheprojectorandsee
iftheLASERbuttonlightingisturnedoff.
ToswitchtotheLaserpointeragain,pressandholdthe
NOSHOWandMENUbuttonsformorethan5seconds
orslidetheRESET/ON/ALL-OFFswitchtoRESETand
thentoON.
WhenyouresetthePointerfunction,theremotecontrol
codewillbereset,aswell.
3
Note:
You can choose the size of Spotlight (Large/Middle/
Small) and the pattern of Pointer (Arrow/Finger/Dot) in
theSettingMenu.See“Pointer”onpage52.
After the Laser pointer has
switchedto the Pointer, use
the LASER button as the
Pointer function ON-OFF
switch. Press the LASER
button pointing toward the
projector and see if it lights
green.
LaserLightWindow
SignalEmissionIndicator
MENUbutton
NOSHOWbutton
Press and hold the MENU
and NO SHOW buttons for
morethan5seconds.
PRESENTATIONPOINTER
button
13
PRESENTATION POINTER
button
R-CLICK button
L-CLICK button
While pressing the MENU
button, press the IMAGE
button number of times
correspondingtotheremote
controlcode.
MENU button
IMAGE button
RESET/ON/ALL-
OFF switch
Remote Control Code
Remote Control Code
Number of Times
Pressing IMAGE
Button
Code 1 1
Code 2 2
Code 3 3
Code 4 4
Code 5 5
Code 6 6
Code 7 7
Code 8 8
Wireless Mouse Operation
Theremotecontrolcanbeusedasawirelessmouseforyourcomputer.
Actasleft(click)mouse
buttonwhiletheprojector
andacomputerare
connectedwithaUSB
cable.
Movethepointeronthescreen
withthisbutton.
Actasright(click)mouse
buttonwhiletheprojectoranda
computerareconnectedwitha
USBcable.
Theeightdifferentremotecontrolcodes(Code1–Code8)areassignedtothisprojector.Switchingtheremote
control codes prevents interference from other remote controls when several projectors or video equipment
nexttoeachotherareoperatedatthesametime.Changetheremotecontrolcodefortheprojectorfirstbefore
changingthatfortheremotecontrol.See"Remotecontrol"intheSettingMenuonpage55.
Press and hold the MENU and IMAGE buttons for
more thanfive seconds to switch between the codes.
The code switches sequentially for one pressing the
IMAGEbutton.Seethelistbelow.
1
Toinitializetheremotecontrolcode,slidetheRESET/
ON/ALL-OFF switch to RESET, and then to ON. The
initialcodeissettoCode1.
2
Part Names and Functions
Beforeoperatingthewirelessmouse,connect
your computer and the projector with a USB
cable (not supplied). See Connecting to a
Computer” on page 16. When the Pointer
function is used, the wireless mouse is not
available.
1
When a USB cable is connected to the
computer and the projector, turn on the
projector first, then the computer. If you turn
on the computer first, the wireless mouse
functionmaynotoperatecorrectly.
2
14
Part Names and Functions
Adjustable Feet
Toensuresafeoperation,pleaseobservethefollowingprecautions:
● Usetwo(2)AAAorLR03typealkalinebatteries.
● Alwaysreplacebatteriesinsets.
● Donotuseanewbatterywithausedbattery.
● Avoidcontactwithwaterorliquid.
● Donotexposetheremotecontroltomoistureorheat.
● Donotdroptheremotecontrol.
● Ifthebatteryhasleakedontheremotecontrol,carefullywipethecasecleanandinstallnewbatteries.
● Riskofanexplosionifbatteryisreplacedbyanincorrecttype.
● Disposeofusedbatteriesaccordingtotheinstructionsoryourlocaldisposalruleorguidelines.
Pressthelid
downwardandslideit.
Openthebattery
compartmentlid.
Installnewbatteries
intothecompartment.
Replacethe
compartmentlid.
Two AAA size batteries
Forcorrectpolarity
(+and–),besure
batteryterminalsare
incontactwithpinsin
compartment.
1 2 3
Point the remote control toward the projector (Infrared
Remote Receiver) when pressing the buttons. Maximum
operating range for the remote control is about 16.4'(5 m)
and60degreesinfrontoftheprojector.
Remote Control Operating Range
Remote Control Battery Installation
16.4'
(5m)
30°
Remotecontrol
30°
AdjustableFeet
FeetLockLatches
Projectionanglecanbeadjustedupto12.0degreeswith
theadjustablefeet.
Liftthefrontoftheprojectorandpressthefeetlocklatches
onbothsideoftheprojector.
Releasethefeetlocklatchestolocktheadjustablefeetand
rotatetheadjustablefeettoaproperheight,andtilt.
Keystone distortion can be adjusted automatically with the
Autosetupfunctionormanuallybyusingtheremotecontrol
orthemenuoperation(seepages25,47-48).
15
Positioning the Projector
Forprojectorpositioning,seethefiguresbelow.Theprojectorshouldbesetperpendicularlytotheplaneofthe
screen.
Installation
Note:
•Thebrightnessintheroomhasagreatinfluenceonpicturequality.Itisrecommendedtolimitambient
lightinginordertoobtainthebestimage.
•Allmeasurementsareapproximateandmayvaryfromtheactualsizes.
7.8’(2.39m)
12.7’(3.88m)
11.8’(3.6m)
19.1’(5.83m)
15.8’(4.81m)
---
23.7’(7.23m)
---
2.3’(0.69m)
7.8’(2.39m)
11.8’(3.6m)
15.8’(4.81m)
23.7’(7.23m)
A
B
30"
62"
93"
124"
186"
2.3’(0.69m)
3.7’(1.14m)
30"
16
Installation
Connecting to a Computer
Cables used for connection
•VGACable(MiniD-sub15pin)*
•DVI-VGACable
•DVICable
•USBCable
•AudioCables
(*Onecableissupplied;othercablesarenotsuppliedwiththeprojector.)
Note:
•InputsoundtotheCOMPUTER1/COMPUTER2AUDIOIN
terminalwhenusingtheCOMPUTERIN2/DVI-Iandthe
COMPUTERIN1/COMPONENTINterminalasinput.
•WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-in
speakerisnotavailable.
• USBcableconnectionisneededwhenoperatingthecomputer
withtheremotecontrolorusingthePAGE▲▼buttonsonthe
remotecontrol.
Unplug the power cords of both the
projector and external equipment
fromtheAC outlet before connecting
cables.
ExternalAudioEquipment
Audiocable
(stereo)
Audiocable
(stereo)
MonitorInput
AudioOutput
COMPUTER2
AUDIOIN
AUDIOOUT
(stereo)
AudioInput
MonitorOutput
COMPUTER
IN2/DVI-I
DVI
cable
MONITOR
OUT
DVI
-VGA
cable
USBcable
VGA
cable
COMPUTER
IN1
VGA
cable
Monitor
Output
17
Installation
Connecting to Video Equipment
Cables used for connection
•VideoandAudioCable(RCAx3)
•S-VIDEOCable
•AudioCable
(Cablesarenotsuppliedwiththeprojector.)
Unplug the power cords of
boththeprojectorandexternal
equipment from theAC outlet
beforeconnectingcables.
Note:
•WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-
inspeakerisnotavailable.
•TheS-VIDEOjackconnectionoverridestheVIDEOjack
connectionwhenselectingAutointheInputMenu(p.41).
ExternalAudioEquipment
Audiocable
(stereo)
VIDEO
S-VIDEO
S-Videocable
Videoandaudiocable
VideoandAudioOutput
S-VideoOutput
AUDIOIN
AudioInput
AUDIOOUT(stereo)
(R)
(L)
(Video)
18
Installation
Connecting to Component Video Equipment
Note:
•When theAUDIO OUT is plugged-in, the projector's
built-inspeakerisnotavailable.
•Seepage76fororderingoptionalcables.
Unplug the power cords of
both the projector and external
equipment from the AC outlet
beforeconnectingcables.
ExternalAudioEquipment
COMPUTER1/AUDIOIN
Audiocable
(stereo)
Audiocable
(stereo)
AudioInput
ComponentVideoOutput
(Y,Pb/Cb,Pr/Cr)
RGBScart21-
pinOutput
AudioOutput
Scart-VGA
cable
Component-
VGAcable
AUDIO OUT
(stereo)
Component
cable
COMPUTERIN1/COMPONENTIN
Cables used for connection
•AudioCables
•Scart-VGACable
•VGACable
•ComponentCable
•Component-VGACable
(Cablesarenotsuppliedwiththisprojector.)
MonitorInput
MONITOROUTPUT
VGAcable
19
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 Vor
200–240VACanditautomaticallyselectsthecorrectinput
voltage. It is designed to work with single-phase power
systems having a grounded neutral conductor. To reduce
theriskofelectricalshock,donotplugintoanyothertypeof
powersystem.
If you are not sure of the type of power being supplied,
consultyourauthorizeddealerorservicestation.
Connect the projector with all peripheral equipment before
turningtheprojectoron.
Note:
UnplugtheACpowercordwhentheprojectorisnot
inuse.Whenthisprojectorisconnectedtoanoutlet
withtheACpowercord,itisinStand-bymodeand
consumesalittleelectricpower.
Connect the AC power cord (supplied) to the
projector.
TotheACoutlet.
(200 - 240 V AC)
NOTE ON THE POWER CORD
ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.
ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.
IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.
Topowercord
connectoronyour
projector.
Projector side
AC outlet side
Ground
TotheACoutlet.
(120 V AC)
For the U.S.A. and Canada
TotheACoutlet.
(200 - 240 V AC)
For the U.K.For Continental Europe

CAUTION
TheAC outlet mustbe near this equipment and must be
easilyaccessible.
20
Thepreparationdisplaywilldisappear
after30seconds.
(Seepage55forLampcontrolstatus.)
Turning On the Projector
Connect the projectors AC power cord into an AC
outlet.ThePOWERindicatorlightsred. Openthelens
cap(seepages8,63).
Press the ON/SYAND-BY button on the top control
or on the remote control. The POWER indicator
lightsgreenandthecoolingfansstarttooperate.The
preparation display appears on the screen and the
countdownstarts.
2
3
1
4
Afterthecountdown,theinputsourcethatwasselected
thelasttimeandthelampcontrolstatusicon(seepage
55)appearonthescreen.
Complete peripheral connections (with a computer,
VCR,etc.)beforeturningontheprojector.
Selected Input Source and Lamp Control
Note:
TheFilterwarningandLampreplacementicons
mayappearonthescreendependingonthe
usagestateoftheprojector.
Basic Operation
16
Lampcontrolstatus
Video
Note:
•WhentheLogoselectfunctionissetto
Off,thelogowill
notbeshownonthescreen(p.49).
•WhenCountdown offor Off is selected intheDisplay
function,thecountdownwillnotbeshownonthescreen
(p.48).
•Duringthecountdownperiod,alloperationsareinvalid.
•WhentheInputSearchfunctionissettoOn2,theinput
signalwillbesearchedautomatically(p.47).
• WhenOffisselectedintheDisplayfunction,theVideo/
PC selection window and the input signal guidance
windowarenotshownonthescreen.(p.48)
5
Ifthereisnosignalinputwhenstartontheprojector,
orthecurrentsignalismissedwhileoperatingthe
projector,theVideo/PCselectionwindowwillbe
displayedonthescreen,pleasemovethepointerto
inputsourcedesiredbypressingthePoint▲▼buttons
andpresstheSELECTbutton.Andthenfollowthe
inputsignalguidancewindowtocorrectthesignaland
connection.
IftheprojectorislockedwithaPINcode,PINcodeinput
dialogboxwillappear.EnterthePINcodeasinstructed
onthenextpage.
Video / PC selection window
Input signal guidance window
Video / PC selection window
Input signal guidance window
Nosignal
CurrentInputsetting:Video
Is signal processed correctly?
Is cable connected properly?
Nosignal
CurrentInputsetting:RGB
Is signal processed correctly?
Is cable connected properly?
Cancel
Cancel
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

Sanyo 3000 ANSI LUMENS PLC-XU305 Owner's manual

Category
Data projectors
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI