For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T27953
HANGING WALL
CABINET
INSTRUCTIONS
COPYRIGHT © JANUARY, 2017 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 10.16) #JH18544 PRINTED IN CHINA
Introduction
The Model T27953 Hanging Wall Cabinet does
not require assembly. The Model T27953 Hanging
Wall Cabinet can be mounted directly to wall
studs or another cabinet unit. (Mounting hardware
not included.)
Inventory Qty
• Hanging Wall Cabinet .................................. 1
• To reduce risk of injuries from tool cabinet:
— Do not stand on cabinet.
— Only move or transport cabinet with
door closed.
• Do not exceed weight capacities:
— Max weight limit is 100 lbs.
V1.01.17
Mounting
To mount, locate wall studs at desired mount-
ing location. Pre-drill (2)
1
⁄4" mounting holes into
wall cabinet to align with each stud, and secure
cabinet to the wall (see Figure 2). Due to the load
capacity of the cabinet, always mount directly to
wall studs!
Cabinet Body
Wall
Stud
(1 of 2)
Lag Screw
Flat Washer
Figure 2. Mounting cabinet to wall.
Cabinet #2
Hex
Bolt
Flat Washer
Flat Washer
Lock
Washer
Hex Nut
Cabinet #1
Figure 3. Mounting cabinet to another cabinet.
If mounting multiple cabinets, ensure all cabi-
nets are properly mounted to the wall and to one
another (see Figure 3), or cabinets may become
unstable and have an increased risk of tipping.
Figure 1. Model T27953.
Tool & Hardware Needed Qty
• Socket Wrench
3
⁄8" ....................................... 1
• Flat Washers
1
⁄4" (wall mount) ...................... 2
• Lag Screw
1
⁄4"-20 x 1" (wall mount) .............. 2
• Hex Bolt
1
⁄4"-20 x 1" (cabinet mount) ............ 2
• Hex Nut
1
⁄4"-20 (cabinet mount) ................... 2
• Lock Washer
1
⁄4" (cabinet mount) ................ 2
• Flat Washer
1
⁄4" (cabinet mount) .................. 4
-2-
T27953 Tool Cabinet (Mfd. 10/16)
1
2
3
4
5
6
7
8
9
10
11
12
Parts Breakdown & List
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT27953001 CABINET BODY 7 PT27953007 FLAT HD SCR M4-.7 X 8
2 PT27953002 CABLE GROMMET 8 PT27953008 TOUCH-UP PAINT, GLOSSY BLACK
3 PT27953003 GAS SPRING 9 PT27953009 TOUCH-UP PAINT, RED
4 PT27953004 DOOR 10 PT27953010 WARNING LABEL
5 PT27953005 DOOR HANDLE 11 PT27953011 QR CODE LABEL
6 PT27953006 DOOR HANDLE CAP 12 PT27953012 GRIZZLY.COM LABEL, GOLD
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.
Grizzly Cabinet Series
T27947 T27952 T27951T27948
T27953
T27950
T27949
The T27953 Hanging Wall Cabinet is part of our heavy-duty 10-piece storage set. These modular cabinets
will enhance storage and workspace in the shop or garage, and they can be mixed and matched to create
a variety of storage solutions.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Grizzly T27949 Owner's manual
-
-
-
-
-
-
-
-
-
Grizzly Industrial G0714 Owner's manual
