1
PRODUCT OVERVIEW
Disassembly Chart (components vary by country)
Thank you for purchasing a Rosewill Case.
Please read the instruction manual before use and retain for future reference.
PRISM T
Dimensions: 224 x 506 x 513 mm (W x H x D)
Top Panel
Panel R
Front Panel
Panel L
120 mm Blue LED
Double Ring Fan
120 mm Fan
224 mm513 mm
506 mm
2
Accessory Kit
x1 x6
Buzzer Cable Tie
Motherboard
Alarm
Cable
Management
x10
Screw-C
(6-32 x 6 mm)
3.5" Drive
x5
Screw-A
(6-32 x 6 mm)
x12
Screw-B
(M3 x 5 mm)
x1
Nut Setter
Standoff
Installation
INSTALLATION GUIDE
Note
*Remove the Styrofoam before proceed to assemble the system.
MotherboardPSU
9+3
Standoff
Motherboard
(9 pre-Installed)
x30
Screw-D
(M3 x 5 mm)
2.5" Drive
3
1. Open the Unit
1-1. Loosen the thumb screws
and take off panels R and L
(Figure 1).
2. Install Power Supply
2-1. Seat the power supply unit at the
bottom-rear of the case and secure with
Screw-A (Figure 2).
3. Install Motherboard
3-1. Secure the motherboard down onto
the pre-installed standoff with Screw-B
(Figure 3).
2
1
3
4. Install Add-on Card
4-1. Loosen the screws to release the slot covers. Install the add-on card and secure with
screws (Figure 4a).
4a
4
5. Install 3.5” Drive
5-1. Pull out the drive tray from the cage, then secure a 3.5” drive onto the tray with Screw-C
(Figure 5a). Slide the tray back into the cage (Figure 5b).
6. Install 2.5” Drive
6-1. Pull out the drive tray from the cage, then secure a 2.5” drive onto the tray with Screw-D
(Figure 6a). Slide the tray back into the cage.
6-2. Unscrew to remove the SSD trays from the right side of chassis, then secure a 2.5” drive
onto the tray with Screw-D (Figure 6b).
6a
6b
5b
5a
4-2. Loosen the screws to release the vertical slot covers (Figure 4b). Install the add-on card
and secure with screws (Figure 4c).
4b 4c
5
6-3. Unscrew to remove the SSD panel (Figure 6c), then secure 2.5” drives onto the panel with
Screw-D (Figure 6d).
6c 6d
7. Care
To prevent damage, keep all panels closed and secured.
7-1. Put the side panels back in place and secure with thumb screws (Figure 7a).
7-2. Clean the dust lters on bottom regularly to ensure adequate airow (Figure 7b).
7a
7b
6
8a
8c
8. Options
8-1. Additional Fan Installation
The PRISM T features ample space for additional cooling fans. Please refer to the
Specications Table for supported options.
8-2. Liquid Cooling Radiator Installation
The PRISM T supports up to 420 mm radiator on the top and 360 mm radiator in the front
to more effectively reduce system temperatures. Pull to remove the panels (Figure 8a/8b),
then secure the radiators with screws (Figure 8c/8d).
8b
8d
7
TOP I/O PINOUT
TOP I/O DIAGRAM
USB 3.0 CONNECTOR HD Audio CONNECTOR
Mic
Audio
USB 3.0
Reset
Power
Technical Support Information [email protected] 1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product.
PRISM T_A
Model
Model Name PRISM T
Specifications
Type Mid Tower
Color Black
Case Material Steel/Plastic
Power Supply Included No
Motherboard Compatibility Mini-ITX, Micro-ATX, ATX, E-ATX
With Side Panel Window Yes/Tempered Glass
Expansion
Internal 3.5" Drive Bays 2 / 0
Internal 2.5" Drive Bays 5 / 7
Expansion Slots 7+2
I/O Panel
Top Ports
4 x USB 3.0
Audio In/Out
Cooling System
120 mm Fans
3 x Front (pre-installed)
3 x Top (optional)
1 x Rear (pre-installed)
2 x Side (optional)
140 mm Fans
2 x Front (optional)
3 x Top (optional)
1 x Rear (optional)
Physical Specifications
Dimensions 8.82 x 19.92 x 20.20 in (W x H x D)
Weight 24.69 lb
SPECIFICATIONS TABLE
/
