HOMCLOUD ME-DBJ 2 User guide

Brand
HOMCLOUD
Model
ME-DBJ 2
Type
User guide

HOMCLOUD ME-DBJ 2 is a wireless radio frequency jingle that can be paired with up to eight doorbells. It has a volume button to adjust the volume and a ringtone button to switch between four different ringtones. The jingle has a pairing mode that is activated by pressing the pairing button for 5 seconds. During pairing mode, the jingle will blink red slowly. To pair the jingle with a doorbell, press the doorbell button. When the jingle status light turns off and the song plays automatically, the pairing is successful.

HOMCLOUD ME-DBJ 2 is a wireless radio frequency jingle that can be paired with up to eight doorbells. It has a volume button to adjust the volume and a ringtone button to switch between four different ringtones. The jingle has a pairing mode that is activated by pressing the pairing button for 5 seconds. During pairing mode, the jingle will blink red slowly. To pair the jingle with a doorbell, press the doorbell button. When the jingle status light turns off and the song plays automatically, the pairing is successful.

≥80dB
Micro USB DC 5V1A or 3x AA batteries
-20C°~50C°
<10μW
<100mA
433 Mhz
Radio Frequency wireless Jingle description
Pairing button: Press " " for 5s to restore Factory Settings;
Click the " " button(1~2 second) to pair the
doorbell
Ringtone button: Click " " button to switch ringtone; you could
choose one among the four ringtones
Volume button: Click " " button to adjust volume, and
continuously click to adjust the volume in a loop
Speaker
Status light
Pairing button
Ringtone button
Volume button
Micro USB
Ring volume
Power
Working temp.
Standby consumption
Work consumption
Wireless radio frequency
QUICK GUIDE
RF wireless Jingle pairing
1. Short press " " (within 2 seconds), the status light flashes red slowly and
the jingle will be in pairing mode;
2. Press the doorbell button to pair, when the jingle status light turns off, and
the song will play automatically, the jingle pairing is successful at this time
Description:
1. The jingle can connect to maximum eight doorbells
2. When the jingle is in pairing mode, press the " " again (within 2 seconds),
the jingle will automatically exit the pairing mode
3. After adding the jingle successfully, the volume will be adjusted to the
maximum automatically. When it is at the minimum volume, it will return to
the maximum volume after pressing " "
4. Each press " ", will play the next song along with blinking blue light
During pairing mode, it will blink red
When playing ringtone,it will blink blue
Imported by: Life365 Italy S.p.A. - European General Agency
Viale Roma 49/a, 47122 Forli, Italy - Made in China
Hereby, Life365 Italy S.p.A. declares that this wireless device
complies with the essential requirements and other provisions
correl of Directive 2014/53 / EU of the European Parliament and of the
Advice. The declaration can be consulted on the website
www.homcloud.com/doc.
"Homcloud" is a registered trademark of Life365 Italy S.p.A.
DECLARATION OF CONFORMITY
Imported by: Life365 Italy S.p.A. - European General Agency
Viale Roma 49/a, 47122 Forli, Italy - Made in China
Hereby, Life365 Italy S.p.A. declares that this wireless device
complies with the essential requirements and other provisions
correl of Directive 2014/53 / EU of the European Parliament and of the
Advice. The declaration can be consulted on the website
www.homcloud.com/doc.
"Homcloud" is a registered trademark of Life365 Italy S.p.A.
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITYWARNINGS
- For internal use only.
- Keep out of reach of children.
- Keep the wi-fi switch away from water, humidity and hot environments.
- DO NOT clean with liquids.
- DO NOT happen the recommended current ratings.
- DO NOT open, disassemble, repair or modify the device.
RF wireless Jingle
  • Page 1 1
  • Page 2 2
  • Page 3 3

HOMCLOUD ME-DBJ 2 User guide

Brand
HOMCLOUD
Model
ME-DBJ 2
Type
User guide

HOMCLOUD ME-DBJ 2 is a wireless radio frequency jingle that can be paired with up to eight doorbells. It has a volume button to adjust the volume and a ringtone button to switch between four different ringtones. The jingle has a pairing mode that is activated by pressing the pairing button for 5 seconds. During pairing mode, the jingle will blink red slowly. To pair the jingle with a doorbell, press the doorbell button. When the jingle status light turns off and the song plays automatically, the pairing is successful.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents