AFL INS-ACA062 User manual

INS-ACA062
AFL
Brand
AFL
Model
INS-ACA062
Type
User manual

AFL INS-ACA062 Quick Spool Tie with Pad offers a secure and efficient way to connect conductors to insulators. Its unique design ensures a tight connection around the insulator and eliminates direct contact between the conductor and insulator, preventing damage. The tie pad protects the conductor from abrasion and provides additional insulation. Installation is simple and requires no special tools. It's perfect for various applications, including overhead power lines, distribution lines, and telecommunications lines.

AFL INS-ACA062 Quick Spool Tie with Pad offers a secure and efficient way to connect conductors to insulators. Its unique design ensures a tight connection around the insulator and eliminates direct contact between the conductor and insulator, preventing damage. The tie pad protects the conductor from abrasion and provides additional insulation. Installation is simple and requires no special tools. It's perfect for various applications, including overhead power lines, distribution lines, and telecommunications lines.

1
Installation Instructions
INS-ACA062
Formed Wire
© 2013, AFL, all rights reserved. Revision 4, 9.7.2021
Specications are subject to change without notice.
AFLglobal.com
|
800.235.3423
NOTE: READ AND UNDERSTAND INSTALLATION INSTRUCTIONS BEFORE INSTALL. ENSURE YOU HAVE THE CORRECT
HELIFORMED PRODUCT BEFORE INSTALL IS STARTED.
Quick Spool Tie with Pad
Cold Application
1. Apply the Tie Pads to the conductor so the conductor does
not come into direct contact with the insulator. Keep the tie
pad slit facing outward.
2. Ensure the Tie Pad is protecting the conductor from
coming in direct contact with the insulator.
Tie Pad
Insulator
Identication Mark
3. Install the Easy Tie by feeding one tie leg behind the spool.
Then pull the tie leg under the conductor while keeping the
right tie leg over the conductor.
4. Position the Quick Spool Tie around the neck of the insulator.
Be sure the conductor is between the two legs of the Easy Tie.
(left tie leg below, right tie leg above conductor)
continued
© 2013, AFL, all rights reserved. Revision 4, 9.7.2021
Specications are subject to change without notice.
AFLglobal.com
|
800.235.3423 2
Installation Instructions
INS-ACA062
Formed Wire
Quick Spool Tie with Pad
5. Wrap the two legs opposite ways ensuring a tight connection
around the insulator and wrap the Tie onto the conductor.
6. Finish by fully wrapping both legs around the conductor.
Ensure the Quick Spool Tie end fully snaps into place.
This may require more pressure than the pressure to wrap.
Safety
1. Quick Spool Ties are precision devices. They should be stored in
covered cartons and handled carefully.
2. This application procedure is NOT intended to supersede any
company construction or safety standards. This procedure
is offered only to illustrate safe application for the individual.
Failure to follow these procedures and restrictions may result
in personal injury.
3. For proper performance and personal safety ensure the proper
size Spool Tie has been selected before installation.
  • Page 1 1
  • Page 2 2

AFL INS-ACA062 User manual

INS-ACA062
AFL
Brand
AFL
Model
INS-ACA062
Type
User manual

AFL INS-ACA062 Quick Spool Tie with Pad offers a secure and efficient way to connect conductors to insulators. Its unique design ensures a tight connection around the insulator and eliminates direct contact between the conductor and insulator, preventing damage. The tie pad protects the conductor from abrasion and provides additional insulation. Installation is simple and requires no special tools. It's perfect for various applications, including overhead power lines, distribution lines, and telecommunications lines.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents