RAB DL6-8GOOF-R-P-CRLEDFA Operating instructions

Brand: RAB

Model: DL6-8GOOF-R-P-CRLEDFA

Type: Operating instructions

RAB DL6-8GOOF-R-P-CRLEDFA is a recessed downlight fixture for interior use. It features extension brackets for easy installation and a goof ring to cover any gaps between the fixture and the ceiling. The fixture is compatible with CRLEDFA-6R-24S-9CCT-UNV-WS LED module, which provides 9CCT tunable white light with a maximum wattage of 24 watts.

DLX-XGOOF/R/P/CRLEDFA

DL6-8GOOF/R/P/CRLEDFA

DL8-12GOOF/R/P/CRLEDFA

DL10-12GOOF/R/P/CRLEDFA

DL6-8GOOF/R/P/CRLEDFA Extension brackets DL10-12GOOF/R/P/CRLEDFA

DL8-12GOOF/R/P/CRLEDFA

DIMENSIONAL DRAWINGS

WHAT’S IN THE BOX

Fixture (1)

TOOLS NEEDED

A screwdriver is needed for installation.

MI PORTANT

CAREFULLY BEFORE INSTALLING FIXTURE. R TAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. READ E

required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNINGS:

•

Read all the product labels and instructions before installing ﬁxture.

Wear safety gloves and other appropriate safety equipment.

Extension brackets(2)

8 1/8"

205.83mm

13 7/16"

341.60mm

7/16"

10.80mm

7/8"

21.50mm

1 7/16"

35.99mm

3/8"

10.00mm

5 7/16"

138.73mm

9 7/16"

240.00mm

3/8"

9.50mm

7 1/8"

180.75mm

13 7/16"

341.60mm

7/16"

10.80mm

Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.

DLX-XGOOF/R/P/CRLEDFA

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS

COMPATIBLE PRODUCTS

Fig.1

Fig.2

Fig.3

Fig.4

1. Slide extension brackets on to ﬁxture clips. (Fig.1)

2. Tighten screws with screwdriver. (Fig.2)

3. Push goof ring gently against ﬁxture until tabs are around

the ﬁxture trim. (Fig.3)

4. Make sure the ﬁxture trim is fastened with tabs. Then follow