Erni 474811 Operating instructions

Brand
Erni
Model
474811
Type
Operating instructions

Erni 474811 is a mini bridge male angled SMT device with 8 positions and is part of the ERNI product family. It has a 3.05 mm pitch and a height of 1.5 mm. The device is made of a high-quality material and has a long lifespan. It is also RoHS compliant and halogen-free.

This device is easy to use and can be mounted on a PCB using SMT technology. It is designed for use in a wide range of applications such as telecommunications, data processing, and industrial automation.

Some of the key benefits of using this device include its small size, high performance, and reliability. It is also cost-effective and easy to maintain.

Erni 474811 is a mini bridge male angled SMT device with 8 positions and is part of the ERNI product family. It has a 3.05 mm pitch and a height of 1.5 mm. The device is made of a high-quality material and has a long lifespan. It is also RoHS compliant and halogen-free.

This device is easy to use and can be mounted on a PCB using SMT technology. It is designed for use in a wide range of applications such as telecommunications, data processing, and industrial automation.

Some of the key benefits of using this device include its small size, high performance, and reliability. It is also cost-effective and easy to maintain.

330
Verpackungseinheit: 1000 Stück
Verpackt im Gurt in Anlehnung an DIN IEC 60286-3
tape on reel packaging according to DIN IEC 60286-3
packaging unit: 1000 pcs
max. 0,2 zu Leiterplattenkante 1)
Anforderungsstufe 1
performance level 1
Anschlussbereich verzinnt 4-6 µm
Koplanarität der Anschlüsse ≤ 0,1 mm
coplanarity area of termination ≤ 0,1 mm
Kontaktbereich vergoldet
mating area gold plating
terminal area 4-6 µm tin plating
Abspulrichtung - reel off direction
8,5
13,31
11
12
2,48
1,98
15,24
Kontaktbezeichnung
contact marking
1
3,05
1,5
1,5
max. 0,2 to board edge
4,7
7
14,34
2,2
3,5
1,27
8,897 x 1,27 =
1,8
7,2
3,6
6,6
0,75 3,48
1) gültig bei Verwendung von Gegenstecker Federleiste 90° in SMD Ausführung
valid for use by mating female connector 90° in SMT version
Pin 1
12
32
Sperrfläche für Leiterbahnen
gültig bei Verwendung von
Gegenstecker Federleiste 90°
in SKV Ausführung
Restricted area for conductors
valid for use by mating
female connector 90°
in IDC version
Leiterplatten-Layout für SMT
PCB-Layout for SMT
Kontaktbezeichnung bei Pin 1
contact marking at pin 1
7 x 1,27 = 8,89
±0,03
13,31
1,27
3,05
±0,05
-0,03
0,3
1,2
2,6
1,6
7,4
±0,03
1,4
2,21
0,8
*Für die Anforderung nach PG 9 der LV214
(Koshiri-Sicherheit)
*For the requirement of the LV214 PG 9
(Koshiri-security)
To ensure that this is the latest
F
E
D
C
B
A
G
H
G
B
C
D
E
F
87
6
5
4
3
2
19 10 11 12
1 2 34 5 6 7 8
A
Subject to modification without
All Dimensions
Class
Scale
Material
In case of any deviation the English version shall prevail.
and may deviate from the english original.
The german version of this drawing has been offered for convenience only
englische Original.
Handhabung. Bei Abweichungen von dem englischen Original gilt das
Die deutsche Version dieser Zeichnung dient nur zur Erleichterung der
payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
d
of its contents to others without express authorization is prohibited. Offenders will be held liable for the
The reproduction, distribution and utilization of this document as well as the communication
Alle Rechte für den Fall der Patent-, Gebrauchsmuster- oder Geschmacksmustereintragung vorbehalten.
verboten, sowie nicht ausdrücklich gestattet. Zuwiderhandlungen verpflichten zu Schadenersatz.
Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung seines Inhalts sind
Index
before using.
contact one of the ERNI companies
version of this drawing, please
Drawing will not be updated.
Dimension no.
Male Angeled
MiniBridge
5:1
474811
SMT 08p KS*
SRCA
Dim. for Information
Tolerances
prior notice.
in mm
A2
I
ISO 8015
Date
10.03.2021
Customer drawing:
All rights reserved.
Only for Information.
ERNI International AG
Zürichstrasse 72
8306 Brüttisellen - Zürich
Switzerland
Downloaded from Arrow.com.
  • Page 1 1

Erni 474811 Operating instructions

Brand
Erni
Model
474811
Type
Operating instructions

Erni 474811 is a mini bridge male angled SMT device with 8 positions and is part of the ERNI product family. It has a 3.05 mm pitch and a height of 1.5 mm. The device is made of a high-quality material and has a long lifespan. It is also RoHS compliant and halogen-free.

This device is easy to use and can be mounted on a PCB using SMT technology. It is designed for use in a wide range of applications such as telecommunications, data processing, and industrial automation.

Some of the key benefits of using this device include its small size, high performance, and reliability. It is also cost-effective and easy to maintain.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents