Adjust-A-Grate XL8 Specification

Brand
Adjust-A-Grate
Model
XL8
Type
Specification

This manual is also suitable for

Adjust-A-Grate XL8 is a custom-fit aluminum window well grate that offers a range of benefits for your home. Its adjustable design allows for a precise fit to your window well, ensuring a secure and snug installation. Made from lightweight tempered aluminum, the grate is strong and durable, supporting up to 400 pounds while being easy to remove in case of emergencies. With its open design, the grate allows ample natural light and ventilation to enter your basement.

Adjust-A-Grate XL8 is a custom-fit aluminum window well grate that offers a range of benefits for your home. Its adjustable design allows for a precise fit to your window well, ensuring a secure and snug installation. Made from lightweight tempered aluminum, the grate is strong and durable, supporting up to 400 pounds while being easy to remove in case of emergencies. With its open design, the grate allows ample natural light and ventilation to enter your basement.

DO IT YOURSELF
SAFETY & SECURITY
Adjustable Aluminum
Window Well Grates
; Custom Fit
; Maintenance Free
; Strong & Lightweight
; Easy to Install
; 10 Year Warranty
DO IT YOURSELF
IN 3 EASY STEPS
Lay the grate’s unfolded box
over the window well. From
the underside, trace the inside
contour with a pencil.
Place the tracing on a table or
the floor, lay the grate on top
of it with the grate’s underside
facing up.
1
2
3
Adjust the grate to t the
tracing following the step-by-
step instructions included, then
place adjusted grate on well.
GRATE.COM/INSTALLATION
Full Step-by-Step
Installation Video
All window wells (even on the same home) can be a slightly
different size and shape as a result of backfilling, installation, etc.
Adjust-A-Grate’s patented design will adjust to a range of sizes and
window well contours (see size chart).
CUSTOM FIT WITHOUT
THE CUSTOM PRICE
Maintenance Free - Constructed of lightweight tempered
aluminum which will never rust or need painting.
Strong and Lightweight - Tempered aluminum constuction
will support up to 400 pounds yet is light enough for easy exit
(Model L6 is only 17 pounds).
Daylight and Fresh Air - Open design allows plenty of
natural light and ventilation to basement.
Easy to Install - Step-by-step instructions and video (see
back) lead you through adjustment and installation.
No Special Tools - A 7/16” Wrench, tape measure, and pencil
or marker are all the tools required to adjust and install the
grate.
Optional Security Kit with Quick Release - deters outside
entry while allowing easy emergency exit (see back panel).
Custom Fit - Because each component loop of the
Adjust-A-Grate adjusts independently of the others, each
model of grate will fit various contours and shapes.
10 Year Warranty - Adjust-A-Grate warrants that it will
replace any part of this product that proves defective in
material or workmanship within ten years from the date
of purchase by a consumer. Adjust-A-Grate assumes no
responsibility for the results of improper installation or
abnormal use.
22” to 25”
45” to 60”
or
Model L6
Model PC8
Model L8 Model XL8
Model L9 Model XL9
Model XL6
Model S4
Select the well shape and
interior
size range that matches your well. The model shown will be the grate your well requires.
Precast
Concrete
Well
Precast
Concrete
Well
All models shown are designed to t wells with rounded
front corners, these models will not adjust to t rectangular
shaped wells.
If the size of your well does not match any of the models
shown, then contact Adjust-A-Grate for alternatives.
Half moon
shape only
All dimensions are
inside
measurements.
30” to 33”
45” to 60”
30” to 33”
45” to 60”
34” to 37”
45” to 60”
15” to 18”
30” to 40”
22” to 25”
60” to 66”
30” to 33”
60” to 66”
34” to 37”
60” to 66”
22” to 25”
45” to 60”
303.278.6262
1.888.877.4728
www.grate.com
OPTIONAL SECURITY KIT
WITH QUICK RELEASE
Easy for Children to Release
Installs in Minutes
No Drilling Necessary
Use Model SK6 with L6 & XL6 Grates
Use Model SK8 with L8, PC8 & XL8 Grates
Use Model SK9 with L9 & XL9 Grates
Manufactured By:
Adjust-A-Grate, Inc.
Golden, CO 80403
  • Page 1 1
  • Page 2 2

Adjust-A-Grate XL8 Specification

Brand
Adjust-A-Grate
Model
XL8
Type
Specification
This manual is also suitable for

Adjust-A-Grate XL8 is a custom-fit aluminum window well grate that offers a range of benefits for your home. Its adjustable design allows for a precise fit to your window well, ensuring a secure and snug installation. Made from lightweight tempered aluminum, the grate is strong and durable, supporting up to 400 pounds while being easy to remove in case of emergencies. With its open design, the grate allows ample natural light and ventilation to enter your basement.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents