Kichler Lighting 52229FXG User manual

Brand
Kichler Lighting
Model
52229FXG
Type
User manual

Kichler Lighting 52229FXG features a versatile design that allows for flush mounting with glass facing up or down. It is compatible with round and square parallel cords and other insulated wires. Installation is straightforward, involving connecting wires, aligning mounting screw holes, and securing glass with a socket ring. The included halogen bulb provides ample illumination, and the bulb cover adds an elegant touch. Other features include an adjustable mounting strap, grounding instructions for both standard and cupped washer configurations, and a spacer for secure glass placement.

Kichler Lighting 52229FXG features a versatile design that allows for flush mounting with glass facing up or down. It is compatible with round and square parallel cords and other insulated wires. Installation is straightforward, involving connecting wires, aligning mounting screw holes, and securing glass with a socket ring. The included halogen bulb provides ample illumination, and the bulb cover adds an elegant touch. Other features include an adjustable mounting strap, grounding instructions for both standard and cupped washer configurations, and a spacer for secure glass placement.

IS-52229-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
CLEANING:
Always be certain that electric current is turned o before
cleaning.
• Only a so damp cloth should be used. Harsh cleaning
products may damage the nish.
[A] Mounting
Strap
[B] Outlet Box
[C] Mounting
Screws
[D] Canopy
[E] Strap
Mounting
Screws
[F] Spacer
[G] Bulb
[H] Glass
[I] Socket Ring
[J] Bulb Cover
[K] Spanner Tool
1) Aach mounng strap[A] to outlet box[B] using the
strap mounng screws[E]. Mounng strap can be
adjusted to suit posion of xture.
2) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, and thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
3) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
4) Push xture to wall carefully aligning the mounng
screw holes in the top and boom of the mounng strap
with mounng screw holes in the top and boom of
the canopy. NOTE: Fixture can be mounted with glass in
the up or down posion. Make sure all wires are inside
canopy and do not get pinched between canopy and
wall.
5) Screw in two (2) mounng screws[C]: one on top side of
canopy and one on boom side of canopy[D].
6) Carefully place the glass[H] over the socket to the
xture. Slip the smaller opening over the socket and t
the glass against the socket.
7) Place the spacer[F] over the socket and using the
spanner tool[K] thread the socket ring[I] onto the
socket. Tighten socket ring to secure glass in place. (DO
NOT over ghten). Do not discard the spanner wrench,
keep for future use if glass needs to be removed.
8) Insert recommended halogen bulb[G] (supplied). (Note:
Do not handle the bulb with bare hands).
9) Install bulb cover[J] over the installed bulb by twisng
into place, do not over ghten.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons
H
B
A
C
D
E
I
G
J
K
F
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kichler Lighting 52229FXG User manual

Brand
Kichler Lighting
Model
52229FXG
Type
User manual

Kichler Lighting 52229FXG features a versatile design that allows for flush mounting with glass facing up or down. It is compatible with round and square parallel cords and other insulated wires. Installation is straightforward, involving connecting wires, aligning mounting screw holes, and securing glass with a socket ring. The included halogen bulb provides ample illumination, and the bulb cover adds an elegant touch. Other features include an adjustable mounting strap, grounding instructions for both standard and cupped washer configurations, and a spacer for secure glass placement.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents