Gorilla Playsets 07-0024 Operating instructions

2 X 6 X 47-1/2"

PANEL BOARD

CHAIN

DETAIL B

HOOK

CLOSE THE HOOK

SO THE CHAIN

DOES NOT

COME OUT

HOOK

CHAIN

LEMONADE

STAND

STEP 84: INSTALL LEMONADE STAND SIGN

1: PLACE THE LEMONADE STAND AT THE CENTER OF THE 2 X 6 X 47-1/2" PANEL BOARD.

2: SCREW THE HOOKS UNDERNEATH OF THE PANEL BOARD AS SHOWN BELOW. THEN PUT THE CHAIN THROUGH THE

HOLE OF LEMONADE STAND PLATE.

3: HANG THE CHAIN ON THE HOOK AS SHOWN IN DETAIL B THEN CLOSE THE HOOK SO THE CHAIN DOES NOT

COME OUT .

(07-0024) LEMONADE STAND SIGN

THIS IS AN EXAMPLE OF HOW TO INSTALL THE LEMONADE STAND SIGN ONTO AN EXISTING PLAY SET OR WOOD PART. YOUR

PLAY SET OR WOOD PART MAY VARY. THE PLAY SET AND OTHER ACCESSORIES SHOWN BELOW ARE NOT INCLUDED WITH THE

LEMONADE STAND SIGN. TOOLS REQUIRED: PLIERS

1: PLACE THE LEMONADE STAND SIGN AT THE CENTER OF THE BOARD.

2: SCREW THE HOOKS UNDERNEATH THE PANEL BOARD AS SHOWN BELOW. THEN PUT THE CHAIN THROUGH THE HOLE OF THE

LEMONADE STAND SIGN.

3: HANG THE CHAIN ON THE HOOK AS SHOWN IN DETAIL B THEN CLOSE THE HOOK SO THE CHAIN DOES NOT COME OUT.

**FOR CHILDREN AGES 3-11**

**FOR RESIDENTIAL USE ONLY**