idh by St. Simons 13200-10B Installation guide

Type
Installation guide
by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist”
©
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
Ribbon & Reed Crane Door Stop
Item# 13200
Dimensions:
Overall Height: 2-1/4
Base Width: 1-5/8”
Base Length: 2”
Overall Projection: 3-1/8”
Weight: 4-1/2 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1) Place the door stop at its desired position, on
floor, so doorknob doesn't come in contact with
wall.
2) Mark screw hole locations on the floor. Remove
the door stop and drill pilot holes
3) Place the door stop back at its desired location,
and secure in place with provided screws.
Catalog Section: D
Ribbon & Reed Crane Door Stop
Item# 13200
  • Page 1 1

idh by St. Simons 13200-10B Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI