idh by St. Simons 13200-008 Installation guide

by St. Simons, Inc.

Quality Solid Brass Decorative Hardware & Bath Accessories

“The Special Finishes Specialist”

idhbrass.com

Installation Instructions

Premium Grade Solid Brass

Ribbon & Reed Crane Door Stop

Item# 13200

Dimensions:

• Overall Height: 2-1/4”

• Base Width: 1-5/8”

• Base Length: 2”

• Overall Projection: 3-1/8”

• Weight: 4-1/2 oz.

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1) Place the door stop at its desired position, on

floor, so doorknob doesn't come in contact with

wall.

2) Mark screw hole locations on the floor. Remove

the door stop and drill pilot holes

3) Place the door stop back at its desired location,

and secure in place with provided screws.

Catalog Section: D

Ribbon & Reed Crane Door Stop

Item# 13200

Date: Rev 11/19

This manual is also suitable for

Download PDF