Motorola C331 User manual

Level 3 Service Manual

C330 Series

Dual Band Wireless Telephone

C330 / C331 / C332 Series

GSM 850/PCS 1900 with GPRS

6881040B65 August 20, 2002 i

Level 3 Service Manual Table of Contents

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Product Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Product Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Regulatory Agency Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Computer Program Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About This Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty Service Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Parts Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Controls, Indicators, and Input / Output (I/O) Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

User Interface Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Tools and Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Removing and Replacing the Rear Housing Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Removing and Replacing the Subscriber Identity Module (SIM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Removing and Replacing the Endo Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Removing and Replacing the Front Endo Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SIM Holder Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Battery Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Removing and Replacing the Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Removing and Replacing the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Removing and Replacing the Transceiver Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Removing and Replacing the Rear Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Removing and Replacing the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Removing and Replacing the Front Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Subscriber Identity Module (SIM) and Identification Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Manual Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Manual Test Mode Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Programming: Software Upgrade and Flexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Part Number Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Exploded View Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Exploded View Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Model-Specific Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index-1

1 and 2

0C35

6881040B65

Table of Contents

ii August 20, 2002

Table of Contents Product Family 0C35

6881040B65 August 20, 2002 1

Level 3 Service Manual Introduction

Introduction

Motorola

®

Inc. maintains a worldwide organization that is dedicated to provide

responsive, full-service customer support. Motorola products are serviced by an

international network of company-operated product care centers as well as

authorized independent service firms.

Available on a contract basis, Motorola Inc. offers comprehensive maintenance and

installation programs which enable customers to meet requirements for reliable,

continuous communications.

To learn more about the wide range of Motorola service programs, contact your local

Motorola products representative or the nearest Customer Service Manager.

Product Identification

Motorola products are identified by the model number on the housing. Use the entire

model number when inquiring about the product. Numbers are also assigned to

chassis and kits. Use these numbers when requesting information or ordering

replacement parts.

Product Names

Product names included in Product Family 0C35 (C330 Series) telephones are listed

on the front cover. Product names are subject to change without notice. Some

product names, as well as some frequency bands, are available only in certain

markets.

Product Changes

When electrical, mechanical or production changes are incorporated into Motorola

products, a revision letter is assigned to the chassis or kit affected, for example;

-A, -B, or -C, and so on.

The chassis or kit number, complete with revision number is imprinted during

production. The revision letter is an integral part of the chassis or kit number and

is also listed on schematic diagrams and printed circuit board layouts.

Regulatory Agency Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following conditions:

1. This device may not cause any harmful interference, and

2. must accept interference received, including interference that may cause

undesired operation.

This class B device also complies with all requirements of the Canadian

Interference-Causing Equipment Regulations (ICES-003).

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement

sur le matériel brouilleur du Canada.

1 and 2

0C35

6881040B65

2 August 20, 2002 6881040B65

Introduction Product Family 0C35

Computer Program Copyrights

The Motorola products described in this manual may include Motorola computer

programs stored in semiconductor memories or other media that are copyrighted

countries preserve for Motorola, Inc. certain exclusive rights to the copyrighted

computer programs, including the exclusive right to copy, reproduce, modify,

decompile, disassemble, and reverse-engineer the Motorola computer programs in

any manner or form without Motorola's prior written consent. Furthermore, the

purchase of Motorola products shall not be deemed to grant either directly or by

implication, estoppel, or otherwise, any license or rights under the copyrights,

patents, or patent applications of Motorola, except for a nonexclusive license to use

the Motorola product and the Motorola computer programs with the Motorola

product.

About This Service Manual

Using this service manual and the suggestions contained in it assures proper

installation, operation, and maintenance of C330 Series telephones. Refer questions

about this manual to the nearest Customer Service Manager.

A product family is the group of products having the same Account Product Code

(APC). To locate the APC on a device, refer to “Mechanical Serial Number (MSN)”

later in this manual.

Audience

This document aids service personnel in testing and repairing C330 Series

telephones. Service personnel should be familiar with electronic assembly, testing,

and troubleshooting methods, and with the operation and use of associated test

equipment.

Use of this document assures proper installation, operation, and maintenance of

Motorola products and equipment. It contains all service information required for

the equipment described and is current as of the printing date.

Scope

The scope of this document is to provide the reader with basic information relating

to C330 Series telephones, and also to provide procedures and processes for

repairing the units at Level 1 and 2 service centers including:

•Unit swap out

• Repairing of mechanical faults

• Basic modular troubleshooting

• Testing and verification of unit functionality

• Initiate warranty claims and send faulty modules to Level 3 or 4 repair

centers.

6881040B65

0C35

1 and 2

6881040B65 August 20, 2002 3

Level 3 Service Manual Introduction

Conventions

Special characters and typefaces, listed and described below, are used in this

publication to emphasize certain types of information.

Revisions

Any changes that occur after manuals are printed are described in publication

revision bulletins (PMRs). These bulletins provide change information that can

include new parts listing data, schematic diagrams, and printed board layouts.

Warranty Service Policy

The product will be sold with the standard 12 months warranty terms and

conditions. Accidental damage, misuse, and extended warranties offered by

retailers are not supported under warranty. Non warranty repairs are available at

agreed fixed repair prices.

Out of Box Failure Policy

The standard out of box failure criteria applies. Customer units that fail very early

on after the date of sale, are to be returned to Manufacturing for root cause analysis,

to guard against epidemic criteria. Manufacturing to bear the costs of early life

failure.

Product Support

Customer’s original units will be repaired but not refurbished as standard.

Appointed Motorola Service Hubs will perform warranty and non-warranty field

service for level 2 (assemblies) and level 3 (limited PCB component). The Motorola

HTC centers will perform level 4 (full component) repairs.

➧

Note: Emphasizes additional information pertinent to the subject

matter.

G

Caution: Emphasizes information about actions which may result in

equipment damage.

E

Warning: Emphasizes information about actions which may result

in personal injury.

E

Keys to be pressed are represented graphically. For example, instead of “Press

the Enter Key”, you will see “Press

E”.

Information from a screen is shown in text as similar as possible to what

appears in the display. For example,

ALERTS or ALERTS or ALERTS.

Information that you need to type is printed in boldface type

4 August 20, 2002 6881040B65

Introduction Product Family 0C35

Customer Support

Customer support is available through dedicated Call Centers and in-country help

desks. Product Service training should be arranged through the local Motorola

Support Center.

Parts Replacement

When ordering replacement parts or equipment, include the Motorola part number

and description used in the service manual or supplement.

When ordering crystals or channel elements, specify the Motorola part number,

description, crystal frequency, and operating frequency desired.

When the Motorola part number of a component is not known, use the product model

number or other related major assembly along with a description of the related

major assembly and of the component in question.

In the U.S.A., to contact Motorola, Inc. on your TTY, call: 800-793-7834

Accessories and Aftermarket Division (AAD)

Replacement parts, test equipment, and manuals can be ordered from AAD.

To order spare parts in the EMEA region call +44 131 479 1274.

To order spare parts in Asia call +65 648 62995.

U.S.A. Outside U.S.A.

Phone: 800-422-4210 Phone: 847-538-8023

FAX: 800-622-6210 FAX: 847-576-3023

6881040B65 August 20, 2002 5

Level 3 Service Manual Specifications

Specifications

General Function Specification

Frequency Range GSM 850

824-848 MHz Tx

869-893 MHz Rx

Frequency Range GSM 900

880-915 MHz Tx (with EGSM)

925-960 MHZ Rx

Frequency Range DCS 1800

1710-1785 MHz Tx

1805-1880 MHz Rx

Frequency Range PCS 1900

1850-1910 MHz Tx

1930-1990 MHz Rx

Channel Spacing 200 kHz

Channels

174 EGSM, 374 DCS, 374 PCS, 124 GSM

850 carriers with 8 channels per carrier

Modulation GMSK at BT = 0.3

Transmitter Phase Accuracy 5 Degrees RMS, 20 Degrees peak

Duplex Spacing 45 MHz GSM, 95 MHz DCS, 80 MHz PCS

Frequency Stability ± 0.10 ppm of the downlink frequency (Rx)

Operating Voltage

+3.0V dc to +4.2V dc (cell)

+4.4V dc to +6.6V dc (external charger jack

with 2.4 K ohm resistor)

Average Transmit Current 300 mA max

Average Stand-by Current 4.0 mA max (DRX2), 2.0 mA max (DRX9)

Dimensions

130 mm x 46 mm x 24.5 mm

(5.1 inches x 1.8 inches x 0.96 inches)

Size (Volume) 105 cc (6.4 in

3

)

Weight 106 gm (3.74 oz) with cell

Temperature Range -10° C to +55° C (+15° F to +130° F)

Battery Life, 600 mAh Li Ion Battery Talk time up to 300 minutes

Standby time up to 300 hours

All talk and standby times are approximate

and depend on network configuration,

signal strength, and features selected.

Standby times are quoted as a range from

DRX=2 to DRX=9. Talk times are quoted

as a range from DTX off to DTX on.

Transmitter Specification

RF Power Output

33 dBm nominal GSM 900

30 dBm nominal GSM 1800

30 dBm nominal PCS

Output Impedance 50 ohms nominal

Spurious Emissions

-36 dBm from 0.1 to 1 GHz,

-30 dBm from 1 to 4 GHz

Receiver Specification

Receive Sensitivity

-106 dBm GSM 900,

-104 dBm GSM 1800,

-104 dBm PCS

RX bit error rate (100k bits) Type II < 2%

Channel Hop Time 500 microseconds

Time to Camp Approximately 5-10 seconds

6 August 20, 2002 6881040B65

Specifications Product Family 0C35

Speech Coding Function Specification

Speech Coding Type

Regular pulse excitation / linear predictive coding

with long term prediction (RPE LPC with LTP)

Bit Rate 13.0 kbps

Frame Duration 20 ms

Block Length 260 bits

Classes Class 1 bits = 182 bits; Class 2 bits = 78 bits

Bit Rate with FEC Encoding 22.8 kbps

6881040B65 August 20, 2002 7

Level 3 Service Manual Product Overview

Product Overview

Motorola PF 0C35 mobile telephones feature global system for mobile

communications (GSM) air interface, general packet radio service (GPRS) transport

technology, and wireless application protocol (WAP) Internet browser. The mobile

telephone uses a simplified icon and graphical-based user interface (UI) for easier

operation, allow short message service (SMS) text messaging, and include clock,

alarm, datebook, calculator, and caller profiling personal management tools. The

PF 0C35 is a dual band phone that allows roaming within the GSM 850,GSM 900

MHz and digital cellular system (DCS) 1800 MHz and 1900 PCS bands.

PF 0C35 telephones support GPRS and SMS in addition to traditional circuit

switched transport technologies. GPRS, where available, provides substantial

increases in mobile data communications performance and the efficient use of radio

spectrum. Data transmission rates for GSM networks can potentially increase from

the current rate of 9.6 kbps up to a theoretical maximum of 171.2 kbps. An increased

data rate is by no means the only benefit provided by GPRS. A key advantage is

the provision of a permanent virtual connection to the network. This “always on”

connection is possible because GPRS uses packet data transfer so that, for example,

email can be downloaded in “background mode.” There is no need for the user to re-

connect before requesting a service, eliminating connection set-up delays and

adding convenience and immediacy to data services access. The “virtual” nature of

this connection means that network resources are not consumed during periods

when a user is not actually sending or receiving data.

The telephones are made of polycarbonate plastic with a metal enclosure. The

display and speaker, as well as the 18-key keypad, transceiver printed circuit board

(PCB), microphone, charger and headphone connectors, and power button are

contained within the candy bar form-factor housing. The 600 mAh Lithium Ion (Li

Ion) battery provides more than 300 minutes of talk time with up to 300 hours of

standby time

1

. The phone accepts 3V mini subscriber identity module (SIM) cards

which fit into the SIM holder under the rear housing cover. These telephones feature

a 96 x 64 pixel 900 square millimeter high-resolution graphics display and an

internal antenna.

Features

PF 0C35 telephones use advanced, self-contained, sealed, custom integrated

circuits to perform the complex functions required for GSM GPRS communication.

Aside from the space and weight advantage, microcircuits enhance basic reliability,

simplify maintenance, and provide a wide variety of operational functions.

Features available in this family of telephones include:

• Lower voltage technology that provides increased standby and talk times

• Extended GSM (EGSM) channels

• Tri-coder/decoder (CODEC) that allows full rate, half rate, and enhanced full

rate modes of transmission

• Supports SMS, concatenated SMS, and cell broadcast messages

2

• Supports GPRS, circuit switched, and SMS networks

2

• WAP 1.2.1 compliant

2

• Super enhanced sound engine

1. All talk and standby times are approximate and depend on network configuration, signal strength, and features selected. Standby

times are quoted as a range from DRX=2 to DRX=9. Talk times are quoted as a range from DTX off to DTX on.

2. Network, subscription and SIM card or service provider dependent feature. Not available in all areas.

8 August 20, 2002 6881040B65

Product Overview Product Family 0C35

• 96 X 64 pixel grayscale graphical display with 4 lines of text, 1 line of icons,

and 1 line of prompts

• Display zoom

• Display animation

• VibraCall® vibrating alert

• 4-Way navigation key

• Downloadable wallpaper and ring tones

3

• Voice activation for phone book entries

• Simplified text entry using iTAP™ predictive text entry

• Calling line identification

3

• Supports call diverting for incoming voice calls

3

• Supports 3V SIM cards

• SIM Toolkit™ Class 2 (STK)

3

• Personal management tools calculator with currency converter, real time clock

with date, reminders, and caller profiling

• Phase II Unstructured Supplementary Service Data (USSD)

3

• Hearing Aid Telephone Interconnection System (HATIS) support

• Chat messaging via WAP over GPRS

3

• Multiple destination SMS

• TrueSync™ Multi-Point Synchronization Capability

Speaker Dependant Voice Activation

The voice dialing feature allows the user to recall pre-programmed voice numbers

simply by pressing the Voice/Ok key and speaking the desired voice tag. Up to 10

voice tags can be stored.

Wireless Access Protocol (WAP) 1.2 Compliancy

In the WAP environment, access to the Internet is initiated in wireless markup

language (WML), which is derived from hypertext markup language (HTML). The

request is passed to a WAP gateway which retrieves the information from the server

in standard HTML (subsequently filtered to WML) or directly in WML if available.

The information is then passed to the mobile subscriber via the mobile network.

The PF 0C35’s microbrowser can be configured for baud, idle timeout, line type,

phone number, and connection type.

3. Network, subscription and SIM card or service provider dependent feature. Not available in all areas.

➧

The user cannot place or receive calls while adding voice tags to the phone’s memory.

➧

Because the GSM standard does not provide the option to store voice tags onto the

SIM card, voice tags are added to the phone’s memory.

➧

Bitmap image data will download as text. If the image is larger than the screen,

only part of the image will display.

6881040B65 August 20, 2002 9

Level 3 Service Manual Product Overview

Simplified Text Entry

iTAP™ predictive text entry. Press a key to generate a character and a dynamic

dictionary uses this to build and display a set of word or name options. The iTAP™

feature may not be available on the phone in all languages.

Caller Line Identification

Upon receipt of a call, the calling party’s phone number is compared to the phone

book. If the number matches a phone book entry, that name will be displayed. If

there is no phone book entry, the incoming phone number will be displayed. In the

event that no caller identification information is available, an incoming call message

is displayed.

SIM Toolkit™ - Class 2

SIM Application Toolkit is a value-added service delivery mechanism that allows

GSM operators to customize the services they offer their customers, from the

occasional user who requests sports news and traffic alerts, to a high call time

business user who receives stock alerts and checks flight times. Operators can now

create their own value-added services menu quickly and easily in the phone. The

customized menu will appear as the first menu and may be updated over-the-air

with new services when customers request them.

Network Based Chat Messaging

The chat messaging feature provides a constant WAP connection through GPRS to

carrier, service center, or factory flexed WAP site. The specific site can also be

entered by the user. Chat messaging is a carrier option.

Personal Information Management

The PF0C35 telephone contains a built in calendar with date book reminders and

phonebook that can be synchronized easily to a computer or PDA.

➧

If the user receives a call while in browser mode, the browser will pause and allow

the user to resume after completing the call.

➧

User must subscribe to a caller line identification service through their service

provider.

10 August 20, 2002 6881040B65

General Operation Product Family 0C35

General Operation

Controls, Indicators, and Input / Output (I/O) Connectors

The PF 0C35 telephones’ controls are located on the front of the device, and on the

keyboard as shown in Figure 1. Indicators, in the form of icons, are displayed on

the LCD (see Figure 2).

Menu Navigation

PF 0C35 telephones are equipped with a simplified icon and graphical-based user

interface. The phone also features a user-definable Quick Access menu that is

accessed by holding down the MENU key. See Figure 3 for details of the PF 0C35

menu structure. A 4-way navigation key allows you to move easily through menus.

Liquid Crystal Display (LCD)

The LCD provides an 900 square millimeter white color backlit grayscale display

with user-adjustable contrast settings for optimum readability in all light

020157o

Figure 1. PF 0C35 Telephone Controls and Indicators Locations

Earpiece

Internal Antenna

USB Connector Port

Insert accessories.

Right Soft Ke

y

Perform functions

identied by right

display prompt.

Menu Key

Power/End Key

Press & hold to

power phone on

& off.

Press & release to

end phone calls,

exit menu system.

Send Key

Make and answer

calls, view recent

dialed calls list.

Navigation Key

Scroll through

lists, set volume.

Left Soft Key

Perform functions

identied by left

display prompt.

Microphone

Headset

Connector Port

Power Connector Port

Insert charger.

6881040B65 August 20, 2002 11

Level 3 Service Manual General Operation

conditions. The large bit-mapped 96 x 64 pixel display includes up to 4 lines of text,

1 line of icons, and 1 line of prompts.

Display animation makes the phone’s icon menu move smoothly as the user scrolls

up and down.

Figure 2 shows some common icons displayed on the LCD.

1. Signal Strength shows the strength of the phone’s connection with the

network. Calls cannot be sent or received when the “no signal” indicator is

displayed.

2. In Use Indicator icon indicates a call in progress.

3. Roam Indicator icon appears when the phone uses another network system

outside the user’s home network. When leaving the home network area, the

phone roams, or seeks, another network.

4. Message Waiting Indicator

4

appears when the phone receives a text mes-

sage.

5. Voice Message Waiting Indicator

4

icon indicates when the phone receives

a voicemail message.

6. Battery Level Indicator shows the amount of charge left in the battery.

7. Real Time Clock shows the current time.

8. Menu Indicator provides access to the phone’s main menu.

9. GPRS Indicator

4

indicates when the phone is currently functioning in GPRS

mode.

10. Alert Setting Indicator indicates the phones current ringer alert setting.

➧

Whether a phone displays all indicators depends on the programming and services

to which the user subscribes.

020158o

Figure 2. PF 0C35 Display Icon Indicators

4. Network, subscription and SIM card or service provider dependent feature. Not available in all areas.

5FO, =E

x

12:00pm

M

Signal

Strength

Indicator

Clock

Battery

Level

Indicator

Service

Inidcator

In Use

Indicator

Text Entry

Indicator

(if applies)

Message

Indicator

Menu Indicator

Roam

Indicator

Alert Type

Indicator

12 August 20, 2002 6881040B65

General Operation Product Family 0C35

User Interface Menu Structure

Figure 3 shows the PF 0C35 telephone menu structure.

Alert Settings

In addition to preset ring tones, PF 0C35 telephones allow the user to download

additional ring tones via SMS to your PC. (Availability is carrier and Network

dependant).

Motorola PF 0C35 phones incorporate the VibraCall® discreet vibrating alert that

helps to avoid disturbing others when a ringing phone is unacceptable.

Alerts can be set to ring only, vibrate only, vibrate then ring, or no ring or vibrate

Additionally, the profiling feature allows users to identify incoming calls by a

specific ringer tone.

020159o

Figure 3. PF 0C35 Menu Structure

Main Menu

Recent Calls

Received Calls

Dialed Calls

Notepad

Call Times

Call Cost

Service Dial

Fixed Dial

Phonebook

Datebook

Quick Dial

Messages

Voicemail

Text Msgs

Browser Alerts

Info Services

Quick Notes

Outbox

Drafts

2Click

Voice Dial

SIM Applications

WebAccess

Calculator

Games

Settings

Settings Menu

Ring/Vibrate

Alert

Alert Detail

My Tones

Call Forward

Voice Calls

Fax Calls

Data Calls

Cancel All

Forward Status

Phone Status

My Tel. Numbers

Credit Info/Available

Active Line

Battery Meter

Other Information

Browser Setup

In-Call Setup

In-Call Timer

Call Cost Setup

My Caller ID

Talk and Fax

Answer Options

Call Waiting

Security

Phone Lock

Lock Application

Fixed Dial

Call Barring

SIM Pin

New Passwords

Other Settings

Personalize

Main Menu

Keys

Greeting

Quick Dial

Initial Setup

Time and Date

1-Touch Dial

Backlight

Zoom

Scroll

Animation

Language

Battery Save

Contrast

DTMF

Master Reset

Master Clear

Network

Car Settings

Headset

6881040B65 August 20, 2002 13

Level 3 Service Manual General Operation

Battery Information

Battery Charge Indicator

The telephone displays a battery charge indicator icon in the idle screen to indicate

the battery charge level. The gauge shows four levels: 100%, 66%, 33%, and Low

Battery.

Embedded Battery Removal

Removing the battery causes the device to immediately shut down and any pending

work (partially entered phone book entries or outgoing messages, for example) is

lost.

E

All batteries can cause property damage and/or bodily injury such as burns if a

conductive material such as jewelry, keys, or beaded chains touch exposed terminals.

The conductive material may complete an electrical circuit (short circuit) and

become quite hot. Exercise care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

G

If the battery is removed while receiving a message, the message will be lost.

➧

To ensure proper memory retention, turn the phone OFF before removing the

battery. Immediately replace the old battery with a fresh battery.

G

Ensure battery switch is always in the ON position.

14 August 20, 2002 6881040B65

General Operation Product Family 0C35

Battery Date Code

The battery date code is a 15 position alphanumeric code that provides, back end

manufacture site information, year and week of manufacture date, cell type and

vendor information.

The battery date code is used for cell phone batteries that were manufactured

beginning in March 2000. The following paragraphs provide more detail about the

battery date code.

1. Backend Pack Manufacturing Site (first position of battery code)

2. Cell code and vendor (second and third position of battery code):

2 alpha characters.

A = Motorola Penang J= ESG, Chihuahua S = T.D.I Scotland

B = T.D.I. Mexico K= T.D.I. Romeoville T = T.D.I Downers

Grove

C = Motorola China L = Motorola

Lawrenceville

U = T.D.I. Hungary

D = T.D.I. Shanghai, China M = TDI, Malaysia

V =

E = ESG, Evadin, Brazil N = TDI, Manau, Brazil W = ESG, Sung Woo

F = ESG, Propower, Korea

O = X = ESG, Foxlink,

China

G = P = Intesys Arizona Y = P&K (G.E.T.)

Systems, Korea

H = Motorola Harvard

Q = Z =

I = Motorola lreland R =

Cell Reference

Designator

Vendor Size Part Number

IA A&TB 6.6x30x48 LGQ633048C

1B A&TB 6.6x30x48 LGQ633048D

1C A&TB 6.6x30x47.2 LGQ633048P

1D A&TB 8.8x34x48 LGQ863448C

1E A&TB 8.8x34x47.3 LGQ8634481-1

1F A&TB 18x65 LGR18650E

IG A&TB 7.5x14.5x48 TH750F5

1H A&TB 10.5x43.6 TH550AAA

3F Toshiba 7.5x14.5x48 TH900F5

3G Gold Peak 1/3A GPZSAFK

6881040B65 August 20, 2002 15

Level 3 Service Manual General Operation

3H Toshiba 4.4x34x56 LA8423456A

3J Saft AA VHAA1200

3K Maxell 5.5x30x48 ICP053048G

3L NEC-Moli 6.7x30x47.3 MK11-2293

3M Mitsubishi 4.4x34x56 Lipmo001

3N Toshiba 6.6x34x50 LGQ633450R

3P Panasonic 6x34x50 CGP34506

3R Toshiba 3.9x34x56 LAB363456A

3S NEC-Moli 6.5x22x65 MK11-2300

3T BYD 6.6*9.8x47.9 LP063048A

3U* Panasonic LL-AAAA HHR70QAB4

3V Sanyo (Toshiba) 6mm NiMH THF6M

3W LG Chemical 6x30x48 ICP633048

3X BYD 5.4x30.1x48.2 LP053048A

3Y BYD 6x34x50 LPO53048A

3Z* Panasonic 6.2x35.2x16. HF6OSS

4A Peacebay-

Manual

6mm NiMH F6MG

4B BYD 4x30x48 F6MG

4C Peacebay-Auto 6.4x16.34 F6MP

4D Sanyo 6mm NiMH HFC1U

4E BYD 8x3 x47.5 LP083448SH

4F Sony 34x67 UP423467A4H

4G LG Chemical 8.6x34x48 ICP863448

4H LG Chemical 6.3x 34x50 ICP633450

4J* BYD 4x30x41 LP043O41A

4K GS Melcotec 4.6x29.5x41 LP423041A

4L LG Chemical 4.2x30x48 ICP423048

4M Toshiba 5.5x30x48 LGQ553048U

4N Sanyo 3.8x34x50 UF383450P

4P Toshiba 4.4x34x50 LGQ443450U

Cell Reference

Designator

Vendor Size Part Number

16 August 20, 2002 6881040B65

General Operation Product Family 0C35

3. Cell date code (fourth fifth and sixth position of battery code) consisting of

characters as stated on cell pack by cell manufacturer. If a 3 digit code is not

used, place a period in the sixth position.

4. Line and shift manufactured (optional) (seventh and eighth positions of battery

code)

5. Year of battery manufacture (ninth position of battery code)

6. Week of manufacture (tenth and eleventh positions of battery code).

7. Front end corepack manufacturing site (twelfth position of battery code (see

step 1)).

Example of a battery date code: A1V90311JCCC...

position 1 = A = Motorola Penang.t (Backend Pack)

position 2 & 3 = 1V = Panasonic, AAA, HHR55B2

position 4, 5 & 6 = 903 = cell date code (from manufacturer)

position 7 & 8 = 11 = (TBD by supplier.Example: Line one of the first shift.)

position 9 = J = 1999 = Year of battery pack manufacture

position 10 & 11 = CC = week twenty two. (backend pack)

position 12 = C = Motorola, China. (Frontend Core Pack)

position 13, 14 & 15 = placeholders (...) to indicate pack has not

been relabeled.

4R Toshiba 4.4x30x48 LGQ443048U

4S Lishen 06x30x48 LP0601AE

4T Panasonic AAAALL HHR70QAB4

1990 = A 1997 = H 2004 = O 2011 = V

1991 = B 1998 = I 2005 = P 2012 = W

1992 = C 1999 = J 2006 = Q 2013 = X

1993 = D 2000 = K 2007 = R 2014 = Y

1994 = E 2001 = L 2008 = S 2015 = Z

1995 = F 2002 = M 2009 = T

1996 = G 2003 = N 2010 = U

A=0 C=2 E=4 G=6 I=8

B=1 D=3 F=5 H=7 J=9

Cell Reference

Designator

Vendor Size Part Number

Page is loading ...

Motorola C331 User manual

This manual is also suitable for

Motorola C331 User manual

Related papers

Other documents