Bradley Corporation S59-3080 User guide

Category
Thermostats
Type
User guide

The Bradley Corporation S59-3080 thermostatic mixing valve is a high-quality device designed to provide precise temperature control for your water system. With its lead-free brass construction and reliable liquid-filled thermostat, you can expect long-lasting performance and accurate temperature regulation within ±3° F. The valve also features integral strainer check stops on the inlets to prevent debris from entering your system. It's easy to install and service, making it a great choice for both residential and commercial applications.

The Bradley Corporation S59-3080 thermostatic mixing valve is a high-quality device designed to provide precise temperature control for your water system. With its lead-free brass construction and reliable liquid-filled thermostat, you can expect long-lasting performance and accurate temperature regulation within ±3° F. The valve also features integral strainer check stops on the inlets to prevent debris from entering your system. It's easy to install and service, making it a great choice for both residential and commercial applications.

© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 1 of 6 8/19/2014
This information is subject to change without notice.
Bradley_TMV_HighLow_HL45_80
• Lead-Free Brass Design
• Reliable Liquid-Filled Thermostat with 10 year warranty
• Integral Strainer Checkstops on Inlets
• Adjustable Set Point within Temperature Range
• Accurate Temperature Control to within ±3° F
• Positive Shutoff of Flow in the Event of Cold Supply Line Failure
or Thermostat Failure
• Easy Installation and Serviceability
• Dirt and Lime Resistant
• Factory Assembled and Tested
• Universal Mounting Capability
• Dial Thermometer
• Cabinet Features:
— 18 Gauge Body & Door
— Left-Hand Hinge
— Cylinder Lock
— Inlet/Outlet Knock-Out Holes for Mounting Flexibility
— Stainless Steel or Baked White Enamel Finishes
— Surface-Mounted or Recessed Style with Flange
Valve Specifications
Maximum Operating Pressure
125 PSI (860 kPA)
Maximum Inlet Temperature
200° F (93° C)
Temperature Range Set Point
Std.
Low
High
90° F (32° C) to 120° F (49° C)
70° F (21° C) to 100° F (38° C)
110° F (43° C) to 140° F (60° C)
110° F (43° C)
80° F (27° C)
130° F (54° C)
Flow Capacities – GPM (L/Min)
Model
Min*
Flow
Pressure Drop – PSI (Bar)
5
(.5)
10
(1.0)
15
(1.5)
20
(2.0)
30
(2.5)
45
(3.0)
60
(4.0)
S59-3045
1.5
(5.5)
12.5
(58.0)
19.0
(89.0)
24.0
(115.0)
28.5
(137.0)
37.0
(157.0)
47.0
(175.0)
56.5
(209.0)
S59-3080
2.0
(7.5)
26.0
(110.0)
36.0
(157.0)
44.0
(193.0)
51.0
(223.5)
63.0
(250.5)
77.0
(275.0)
88.0
(318.0)
* Recirculation system only (See diagram on Page 2). When properly installed near
the hot water source with a continuously operating recirculation pump, the valve will
maintain set temperature with a .5 GPM (2.0 L/Min) draw from the plumbing system.
Code Compliance and Certifications
ASSE 1017 & cUPC certified. Complies with California Lead Plumbing Law.
Engineer's Approval
HL45 (Part No. S59-3045)
Lead Free †
Certified to
NSF/ANSI 372
Standard product selections contained within this document are third party
CERTIFIED to NSF/ANSI 372 meeting the Lead-Free content requirement.
Any product configured with custom options will be COMPLIANT with NSF/
ANSI 372 meeting the Lead-Free content requirement.
HL45, HL80
Thermostatic High-Low Valves
Optional Selections
Finish
¨C
Chrome Plated
Thermostat
¨L
¨H
Low Range Thermostat
High Range Thermostat
Bracket
¨B
Wall Mounting Bracket
Piped Assembly
¨P
¨N
Piped Assembly with Inlet and Outlet Shutoff
Piped Assembly with Outlet Shutoff
Cabinets
¨SS
¨RS
¨SE
¨RE
¨W
Surface Mount Stainless Steel
Recessed Stainless Steel
Surface Mount White Enamel
Recessed White Enamel
Plexi-glass Window in Door
Models (Must select one)
Model Description
¨S59-3045
HL45-Thermostatic Mixing Valve
¨S59-3080
HL80-Thermostatic Mixing Valve
† Wetted surface contains less then .25% lead
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 2 of 6 8/19/2014
This information is subject to change without notice.
Bradley_TMV_HighLow_HL45_80
Recirculation Diagram
Model A B C D E
S59-3045 7" (178) 2" (51) 3-1/4" (84) 4-3/4" (119) 8" (203)
S59-3080
8-3/4" (224) 2-1/2" (64) 3-1/2" (89) 5-1/4" (135) 12-1/4" (312)
Dimensions
Model F G H X
NPT
Y
NPT
Z
NPT
S59-3045
14" (356) 3-1/8" (79) 9-1/4" (234) 3/4" 1" 3/4"
S59-3080 19" (483) 3-5/8" (91) 11-3/8" (290) 1" 1-1/4" 3/4"
(mm)
F
Min.
E
C
D
X
NPT
Y
NPT
Z
NPT
X
NPT
Balancing
Valve (Typ)
Recirculating
Pump
Check Valve
Tempered Water Flow
Check Valve (Typ)
Cold
Cold
Water
Heat
Trap 28"
Drop
Water
Heater
Storage
Tank
Return
Flow
Temperature
Switch
Alternate
Recirculation
(More than
5 GPM)
Recirculated
Tempered Water
H
A
B
G
HL45, HL80
Thermostatic High-Low Valves
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 3 of 6 8/19/2014
This information is subject to change without notice.
Bradley_TMV_HighLow_HL45_80
Dimensions — HL45 Surface-Mounted Cabinet
Bottom
View
24"
(610)
Front
View
10-1/2" (267)
7"
(178)
22-3/4" (578) Door
8-1/2"
(216)
Side
View
2"
(51)
24"
(610)
1" NPT Outlet
6-1/2"
(165)
22-3/4"
(578)
Door
2" (51)
2"
(51)
3/4" NPT Inlets
(mm)
7-1/2"
(191)
6-1/4"
(159)
20"
(508)
20" (508)
8-7/16"
(214)
2"
(51)
2" (51)
.47" Dia.
Holes
6 Places
Back
View
HL45, HL80
Thermostatic High-Low Valves
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 4 of 6 8/19/2014
This information is subject to change without notice.
Bradley_TMV_HighLow_HL45_80
Dimensions — HL80 Surface-Mounted Cabinet (mm)
Bottom
View
24"
(610)
Back
View
9-3/4"
(248)
5-1/8"
(130)
24"
(610)
20" (508)
9-3/16"
(233)
2"
(51)
2" (51)
.47" Dia.
Holes
6 Places
Front
View
10-3/16"
(259)
22-3/4" (578) Door
8-3/4"
(222)
7-5/8"
(194)
Side
View
28"
(711)
1-1/4" NPT Outlet
6-1/2"
(165)
2-1/4" (57)
2-1/2" (64)
1" NPT
Inlets
2-1/2" (64)
26-3/4"
(679)
Door
HL45, HL80
Thermostatic High-Low Valves
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 5 of 6 8/19/2014
This information is subject to change without notice.
Bradley_TMV_HighLow_HL45_80
Dimensions — HL45 Recessed Cabinet
Bottom
View
24"
(610)
(mm)
10-1/2"
(267)
7"
(178)
22-3/4" (578) Door
8-1/2"
(216)
26"
(660)
22-3/4"
(578)
Door
26" (660)
Front
View
24"
(610)
1" NPT
Outlet
6-1/2"
(165)
2" (51)
5" (127)
3/4" NPT
Inlets
2" (51)
2"
(51)
2" (51)
14"
(356)
.28" Dia. Holes
2 Each Side
4 Total
Side
View
HL45, HL80
Thermostatic High-Low Valves
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 6 of 6 8/19/2014
This information is subject to change without notice.
Bradley_TMV_HighLow_HL45_80
Dimensions — HL80 Recessed Cabinet
Bottom
View
24"
(610)
(mm)
10-3/16" (259)
8-3/4"
(222)
22-3/4" (578) Door
7-5/8"
(194)
30"
(762)
26-3/4"
(679)
Door
26" (660)
Front
View
18"
(457)
28"
(711)
1-1/4"
NPT
Outlet
6-1/2"
(165)
2-1/2" (64)
5" (127)
1" NPT
Inlets
2"
(51)
2-1/4" (57)
2-1/2" (64)
Side
View
.28" Dia. Holes
2 Each Side
4 Total
HL45, HL80
Thermostatic High-Low Valves
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Bradley Corporation S59-3080 User guide

Category
Thermostats
Type
User guide

The Bradley Corporation S59-3080 thermostatic mixing valve is a high-quality device designed to provide precise temperature control for your water system. With its lead-free brass construction and reliable liquid-filled thermostat, you can expect long-lasting performance and accurate temperature regulation within ±3° F. The valve also features integral strainer check stops on the inlets to prevent debris from entering your system. It's easy to install and service, making it a great choice for both residential and commercial applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI