LG 50PA6500 User manual

www.lg.com

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating the

set and retain it for future reference.

PA45**

PA49**

PA55**

PA65**

2

ENG

ENGLISH

LICENSES

ENG

ENGLISH

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays

DivX video. Visit divx.com for more information and software tools to convert your

files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to

vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation

or its subsidiaries and are used under license.”

Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274

NOTE

 Image shown may differ from your TV.

 Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

3

ENGENGLISH

LICENSES

4

ENG

ENGLISH

TABLE OF CONTENTS

2 LICENSES

6 INSTALLATION PROCEDURE

6 ASSEMBLING AND PREPARING

6 Unpacking

9 Separate purchase

9 Parts and buttons

12 Lifting and moving the TV

13 Setting up the TV

13 - Attaching the stand

15 - Mounting on a table

16 - Mounting on a wall

17 - Tidying cables

18 REMOTE CONTROL

20 WATCHING TV

20 Connecting an antenna

20 Turning the TV on for the first time

21 Watching TV

21 Managing programmes

21 - Automatically setting up programme

23 - Cable DTV Setting (In Cable mode only)

23 - Manually setting up programme (In

digital mode)

24 - Manually setting up programme (In

analogue mode)

25 - Editing your programme list

27 - CI [Common interface] Information

28 - Selecting the programme list

29 EPG (Electronic Programme Guide) (In

digital mode)

29 - Switch on/off EPG

29 - Select a programme

30 - NOW/NEXT Guide Mode

30 - 8 Day Guide Mode

30 - Date Change Mode

30 - Extended Description Box

30 - Remind Setting Mode

31 - Schedule List Mode

31 Using additional options

31 - Adjusting aspect ratio

33 - Changing AV modes

33 - Using the input list

34 - Locking the buttons on the TV (Child Lock)

35 Using the quick menu

36 Using the customer support

36 - Testing Software Update

37 - Testing the Picture / Sound

37 - Using Signal Test

37 - Using the product or service information

38 PENTOUCH

38 Using Pentouch

39 - Step of using the Pentouch program

39 - System Requirements

39 - Installing the Pentouch Program

40 - Removing the Pentouch Program

40 - Pairing between Touch Pen and Dongle

44 - Using the Pentouch Function

44 - Display Resolution Settings for Pentouch

46 Checking the Pentouch Functions

47 - Using Toolbar

48 - Using Sketchbook

50 - Using Photo Editor

52 - Using Family Diary

52 - Using Gallery

53 - Using Internet

54 - Using the My Office function

55 NETWORK SETTING

55 - Connecting to a wired network

56 - Network Status

57 ENTERTAINMENT

57 - Connecting USB storage devices

58 - Browsing files

59 - Viewing movies

62 - Viewing photos

64 - Listening to music

66 - DivX® VOD Guide

5

ENGENGLISH

TABLE OF CONTENTS

67 CUSTOMIZING TV SETTING

67 Accessing main menus

68 Customizing settings

68 - PICTURE settings

73 - AUDIO settings

76 - SETUP settings

77 - TIME settings

78 - LOCK settings

79 - OPTION settings

81 - NETWORK Settings

82 MAKING CONNECTIONS

83 Connection overview

84 Connecting to a HD receiver, DVD, or

VCR player

84 - HDMI Connection

85 - DVI to HDMI Connection

86 - Component Connection

87 - Euro Scart connection

88 - Composite Connection

89 Connecting to a PC

89 - HDMI Connection, DVI to HDMI Con-

nection or RGB Connection

91 Connecting to an Audio System

91 - Digital Optical Audio Connection

92 Connecting to a USB

92 Connecting to a CI Module

93 SIMPLINK connection

93 - Activating the SIMPLINK feature

94 TELETEXT

94 Switch On/Off

94 Simple Text

94 - Page selection

94 Top Text

94 - Block / Group / Page Selection

94 - Direct Page Selection

95 Fastext

95 - Page selection

95 Special Teletext Function

96 DIGITAL TELETEXT

96 Teletext within digital service

96 Teletext in digital service

97 MAINTENANCE

97 Cleaning your TV

97 - Screen and frame

97 - Cabinet and stand

97 - Power cord

98 Preventing “Image burn” or “Burn-in” on

your TV screen

99 TROUBLESHOOTING

101SPECIFICATIONS

104 IR CODES

105EXTERNAL CONTROL DEVICE

SETUP

105 RS-232C Setup

105 Type of connector; D-Sub 9-Pin Male

105 RS-232C Configurations

106 Communication Parameters

106 Command reference list

107 Transmission / Receiving Protocol

112 OPEN SOURCE LICENSE

112 Open source software notice

6

ENG

ENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

Remote control,

Batteries (AAA)(See p.18)

Owner’s manual,

CD manual

Cable Holder(See p.17)

x 3 x 4

M5 x 16 M4 x 30

Screw for assembly

(See p.13, See p.14)

Power Cord Holder(See p.17) Power Cord

Protection Cover(See p.14) Ferrite core

(Depending on model)

Polishing cloth

(Depending on model)

Gently wipe the spots on the

cabinet with the polishing cloth.

Stand Body(See p.13) Stand Base(See p.13)

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and item.

Only 42/50PA45**, 50/60PA55**, 50/60PA65**

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

7

ENGENGLISH

ASSEMBLING AND PREPARING

Only 42/50PA49**

Remote control,

Batteries (AAA)(See p.18)

Owner’s manual,

CD manual

Pentouch Caution Guidelines

x 3 x 4

M5 x 16 M4 x 30

Screw for assembly

(See p.13, See p.14)

Power Cord Holder(See p.17) D-sub 15 pin signal cable

Protection Cover(See p.14) Ferrite core

(Depending on model)

Power Cord

x 2

Cable Holder(See p.17) Eye-bolt , Wall bracket

(See p.15)

Polishing cloth

(Depending on model)

Gently wipe the spots on the

cabinet with the polishing cloth.

Home

Charging Cable(See p.43) Tip(See p.43)

The number of tip may differ

depending on the model.

Touch Pen (AN-TP300)

The number of touch pen

may differ depending on the

model.

(See p.41)

Touch Pen Dongle

(AN-TD200)(See p.41)

Cradle(See p.41) Stand Base (See p.13)

Stand Body (See p.13)

8

ENG

ENGLISH

ASSEMBLING AND PREPARING



The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

How to use the ferrite core

1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

2 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to an External device]

[Figure 1]

[to the TV]

10 mm(+ / - 5 mm)

3 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,

R cable.

Wind the

component Y, Pb, Pr, L, R cable

on the ferrite core once.

Place the ferrite core close to the TV.

[Cross Section of

Ferrite Core]

(Gray)

[to an External device]

[Figure 3]

[to the TV]

10 mm(+ / - 5 mm)

[Cross Section of

Ferrite Core]

(Black)

[to a wall plug]

[to the TV]

[Figure 2]

[Cross Section of

Ferrite Core]

(Black)

- If there is one ferrite core, follow as shown in Figure 1.

- If there are three ferrite cores, follow as shown in Figures 1 and 2.

- If there are four ferrite cores, follow as shown in Figures 1, 2 and 3.

- If there is LAN port, additionally follow as shown in Figure 4.

NOTE

4 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the

LAN cable thrice on the ferrite core. Place the ferrite core close to the TV and an External device.

A (Gray) B (Gray)

[Cross Section of

Ferrite Core]

[to the TV]

[to an External

device]

B A A

[Figure 4]

 For an optimal connection, HDMI cables and USB de-

vices should have bezels less than 10 mm thick and

18 mm width. Use an extension cable that supports

USB 2.0 if the USB cable or USB memory stick does

not fit into your TV’s USB port.

*A 10 mm

*B

18 mm

9

ENGENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

 TV can be placed in standby mode in order to reduce the power consumption. And TV should be

turned off if it will not be watched for some time, as this will reduce energy consumption.

 The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

NOTE



Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall.



Do not drag the TV. The floor or the product may be damaged.



Some models have a thin film attached on to the screen and this must not be removed.

CAUTION



Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.

CAUTION

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

This device only works with compatible LG Plasma TV.

AN-TP300

Touch Pen, Cradle

The number of touch pen and

cradle may differ depending on

the model.

Compatibility

42/50PA45** 50/60PA55** 50/60PA65** 42/50PA49**

AN-TP300

Touch Pen, Cradle

•

10

ENG

ENGLISH

ASSEMBLING AND PREPARING

Screen

Connection panel

(See p.82)

Speakers

1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.

Button Description

Turns the power on or off

Changes the input source

Accesses the main menus, or saves your input and exits the menus

Selects the highlighted menu option or confirms an input

Adjusts the volume level

Scrolls through the saved programmes

Remote control and

intelligent

1

sensors

Power Indicator



Red – In Standby

mode



Off – TV turns on



Image shown may differ from your TV.

Menu Description

1

PCMCIA Card Slot

2

USB input

3

HDMI IN 3

4

HDMI / DVI IN 2

1

2

4

3

Only

42/50PA49**,

50/60PA65**

Only

42/50PA45**,

50/60PA55**

(Only LAN PORT

model)

Only 42/50PA45**-ZA~F, 42/50PA49**-ZA~F, 50/60PA55**-ZA~F, 50/60PA65**-ZA~F

11

ENGENGLISH

ASSEMBLING AND PREPARING

Screen

Connection panel

(See p.82)

Speakers

1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.

Button Description

Turns the power on or off

Changes the input source

Accesses the main menus, or saves your input and exits the menus

Selects the highlighted menu option or confirms an input

Adjusts the volume level

Scrolls through the saved programmes

Remote control and

intelligent

1

sensors

Power Indicator



Red – In Standby

mode



Off – TV turns on



Image shown may differ from your TV.

Menu Description

1

PCMCIA Card Slot

2

USB input

3

HDMI IN 3

4

HDMI IN 2

1

2

4

3

Only

42/50PA49**,

50/60PA65**

Only

42/50PA45**,

50/60PA55**

(Only LAN PORT

model)

Only 42/50PA45**-ZG~M, 42/50PA49**-ZG~M, 50/60PA55**-ZG~M, 50/60PA65**-ZG~M

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to

prevent the TV from being scratched or damaged

and for safe transportation regardless of its type

and size.



It is recommended to move the TV in the box

or packing material that the TV originally came

in.



Before moving or lifting the TV, disconnect the

power cord and all cables.



When holding the TV, the screen should face

away from you to prevent the screen from

scratches.



Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grill area.



When transporting a large TV, there should be

at least 2 people.



When transporting the TV by hand, hold the

TV as shown in the following illustration.



When transporting the TV, do not expose the

TV to jolts or excessive vibration.



When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.



Avoid touching the screen at all times, as

this may result in damage on the screen

or some of the pixels used to create

images.

CAUTION

13

ENGENGLISH

ASSEMBLING AND PREPARING

Setting up the TV



Image shown may differ from your TV.

Attaching the stand

Put your TV on a pedestal stand and mount the TV on a table or wall.

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

1 2

3

Front

M5 x 16

3 EA

Only 42/50PA45**, 42/50PA49**, 50/60PA55**, 50/60PA65**



When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

CAUTION



Tighten the screws firmly to prevent the TV

from tilting forward. Do not over tighten.

CAUTION

Stand Base

Stand Body

M4 x 30

4 EA

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

 Tighten the screws firmly to prevent the TV

from tilting forward. Do not over tighten.

M4 x 30

4 EA

1

2

To detach the stand,

Protection Cover

3



When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

CAUTION



This will protect the opening from accu-

mulating dust and dirt.



When installing the wall mounting brack-

et, use the Protection cover.

NOTE

M4 x 30

2 EA

15

ENGENGLISH

ASSEMBLING AND PREPARING

Mounting on a table



Image shown may differ from your TV.

1

Lift and tilt the TV into its upright position on a table.

- Leave a 10 cm (minimum) space from the wall for

proper ventilation.

2

Connect the power cord to a wall outlet.

10 cm

 Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

CAUTION

 Swivel 20 degrees to the left or right and

adjust the angle of the TV to suit your

view.

NOTE



When adjusting the angle of the product,

watch out for your fingers.

- Personal injury may occur if hands or fin-

gers are pinched. If the product is tilted

too much, it may fall, causing damage or

injury.

CAUTION

Securing the TV to a wall (Depending on model)



Image shown may differ from your TV.

1

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2

Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

3

Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

flat surface.



Use a platform or cabinet that is strong

and large enough to support the TV

securely.

NOTE



Make sure that children do not climb on

or hang on the TV.

CAUTION

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a wall

Attach a wall mount bracket at the rear of the TV

carefully and install the wall mount bracket on a

solid wall perpendicular to the floor. When you

attach the TV to other building materials, please

contact qualified personnel.

LG recommends that wall mounting be performed

by a qualified professional installer.

10 cm

Make sure to use screws and wall mount

bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are described in

the following table.

Separate purchase(Wall Mounting Bracket)

Model 42/50PA45**

42/50PA49**

50PA55**

50PA65**

60PA55**

60PA65**

VESA (A x B) 400 x 400 600 x 400

Standard screw M6 M8

Number of screws 4 4

Wall mount bracket PSW400B

PSW600B

PSW420BX PSW620BX



Disconnect the power first, and then move

or install the TV. Otherwise electric shock

may occur.



If you install the TV on a ceiling or slanted

wall, it may fall and result in injury. Use

an authorized LG wall mount bracket

and contact the local dealer or qualified

personnel.



Do not over tighten the screws as this may

cause damage to the TV and void your

warranty.



Use the screws and wall mount bracket that

meet the VESA standard. Any damages

or injuries by misuse or using an improper

accessory are not covered by the warranty.

CAUTION



Use the screws that are listed on the

VESA standard screw specifications.



The wall mount kit includes an installation

manual and necessary parts.



The length of screws may differ

depending on the wall mount. Make sure

to use the proper length.



For more information, refer to the manual

supplied with the wall mount bracket.

NOTE

A

B

17

ENGENGLISH

ASSEMBLING AND PREPARING

Tidying cables



Image shown may differ from your TV.



Do not move the TV by holding the Cable

Holder & Power Cord Holder, as the

Cable holders may break, and injuries

and damage to the TV may occur.

CAUTION

1 Install the Power Cord Holder and Power

Cord. It will help prevent the power cable from

being removed by accident.

2 Gather and bind the cables with the Cable

Holder.

Power Cord Holder

Cable Holder

18

ENG

ENGLISH

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching

and ends to the label inside the compartment, and close the battery cover. Be

sure to point the remote control to the remote control sensor on the TV.

To remove the batteries, perform the installation actions in reverse.



Do not mix old and new batteries, as this may damage the remote control.

CAUTION



Image shown may differ from your TV.

(POWER)

Turns the TV on or off.

ENERGY SAVING (See p.68)

Adjusts the brightness of the screen to reduce energy consumption.

TV/RAD

Selects Radio, TV and DTV programme.

GUIDE

Shows programme guide.

INFO (See p.29)

Views the information of the current programme and screen.

RATIO (See p.31)

Resizes an image.

INPUT (See p.33)

Changes the input source; Turns the TV on.

Number buttons

Enters numbers.

LIST (See p.28)

Accesses the saved programme list.

Q.VIEW

Returns to the previously viewed programme.

or

19

ENGENGLISH

REMOTE CONTROL

SETTINGS

Accesses the main menus, or saves your input and exit the menus.

Q. MENU (See p.35)

Accesses the quick menus.

Navigation buttons (up/down/left/right)

Scrolls through menus or options.

OK

Selects menus or options and confirms your input.

Returns to the previous level.

EXIT

Clears all on-screen displays and return to TV viewing.

+ -

Adjusts the volume level.

FAV (See p.28)

Accesses your favourite programme list.

AD

Switches the Audio Description On or Off.

MUTE

Mutes all sounds.

P

∧∨

(P + -)

Scrolls through the saved programmes.

PAGE

Moves to the previous or next screen.

Coloured buttons

These buttons are used for teletext (on TELETEXT models only),

Programme edit.

Control buttons(

, , , , )

Controls the MY MEDIA menus, or the SIMPLINK compatible devices

(USB,SIMPLINK).

SUBTITLE

Recalls your preferred subtitle in digital mode.

1

TELETEXT BUTTONS (See p.94)

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

INFO (See p.29)

Views the information of the current programme and screen.

GUIDE

Shows programme guide.

SIMPLINK (See p.93) (Depending on model)

Accesses the AV devices connected with the HDMI cable

through HDMI-CEC.

Opens the SIMPLINK menu.

AV MODE (See p.33)(Depending on model)

Selects an AV mode

1

20

ENG

ENGLISH

WATCHING TV



For optimum picture quality, adjust

antenna direction.



In poor signal areas, to achieve better

picture quality it may be necessary to

install a signal amplifier to the antenna.



If the image quality is poor with an

antenna connected, aim the antenna to

the correct direction.



An antenna cable and converter are not

supplied.

NOTE

Turning the TV on for the first

time

When you turn the TV on for the first time, the

Initial setting screen appears. Select a language

and customize the basic settings.

1

Connect the power cord to a power outlet.

2

In Standby mode, press (POWER) to turn the TV

on.

The Initial setting screen appears if you turn

the TV on for the first time.



You can also access Factory Reset by

accessing OPTION in the main menus.

NOTE

Wall Antenna

Socket

Connecting an antenna

Connect an antenna to watch TV while referring to

the following.

To prevent damage do not connect to the mains

outlet until all connections are made between the

devices.

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

3

Follow the on-screen instructions to customize

your TV settings according to your preferences.

Selects a language to display.

Selects Home Use for the

home environment.

Selects a country to display.

(Depending on model)

Language



Mode Setting



Country



Set Password



Time Zone



Network Setting



Auto Tuning

Selects the time zone and

daylight saving.

(When Russia is selected for

Country)

(If there is LAN port) selects

Network Setting to display.

Scans and saves

available programmes

automatically.

Set the password.

(When France or Italy is

selected for Country)

Page is loading ...

LG 50PA6500 User manual

LG 50PA6500 User manual

Related papers

Other documents