AUTOMAXI
INTERNATIONAL
24 r
ue Claude Ber
nard
CS 61768
35 417 Saint-Malo Cedex
FRANCE
Tél : +33 (0)2 99 21 12 70
Fax : +33 (0)2 99 21 12 71
www.automaxi.fr
10 mn
+
F
IX
B
AR
X
4
X
2
F
IX
B
AR
X
4
X
2
124
124
FIX POINT
1 2 3
Fix the feet on the bars
Adjust the distance
Tighten
Ref. Imp. 153336/A6-1
1
2
3
4
124
FIX POINT
x 4
x 4
x 4
x 1
x 1
x 1
x 1
P016
x 1
P017
x 1
P018
x 1
P015
x 1
Montage barres - Assembly bars - Stangenmontage - Montagio barre - Montaje barras
Montagem barras - Montage stangen -
Montaz na samochodzie
x 4
CLIC
!
CL
IC !
x 4 x 4 x 4
ENGLISH
8
Fixation
accessories in the
rail: Unclip an end.
Remove the cen-
tral part of snap
ring .
Fasten the acces-
sory in the rail,
reclip the ends.
8
9
Read and
follow instruc
-
tions for
mounting and
use.
Keep tools,
keys, packag-
ing, mounting
instructions for
future uses.
9
6
Check the cor
rect position and
the appropriate
fastening of the
bars (in the event
of problem, redo
the mounting of
the bars).
6
5
Cut the obtu-
rator O and clip it
on in the apertures
located under the
bars.
5
Balance
t
he jutting out
of the bars
from the
right/left side of
t
he vehicle.
Strongly tight-
e
n the screws
V1 (8 N.m)
using the tool.
Check the
orientation of
the aerody-
n
amic deflector
of the snap
rings J.
Put the tabs P
in place
against the
roof.
Strongly tight-
en the screws
V2 (5 N.m)
with the help of
the tool.
3
3
4
4
J
J
5 N.m
V
2
8
N.m
Put the theft
protection covers
and lock with the
keys.
7
7
Montage sur véhicule - Assembly conveys - Fahrzeugmontage - Montaggio veicoli
Montaje vehiculo - Montagem veiculo - Montage op voertuig - Montaz relingów
Strongly tight
-
en the screws
V2 (3,5 N.m)
with the help of
the tool.
3,5 Nm
Adjust the
bars on the
vehicle follow-
ing the dia-
gram opposite.
Check the ori-
entation of the
aerodynamic
deflector of the
snap rings J.
Put the tabs P
in place
against the
roof.
J
J
Unclip the
obturators
l
ocated on the
roof of the
vehicle at the
level of the
anchoring
p
oints.
Remove the
obturators.
124
FIX POINT
1
ENGLISH
1
2
2
3
Max.
75
Kg
3
P
V2
Focus C-Max = ø6x50 mm
307 / Mondeo II = ø6x40 mm
FORD
M
ondeo II 4/5 01
➔ 7
5B
Focus C.MAX 5 03
➔ 75 C
Focus II 3,5 10/04
➔ 75 C
Focus II 4 10/04
➔ 75 C
PEUGEOT
3
07 3,5 01
➔ 7
5B
P017
P018
P016
P015
CONVIENT POUR VEHICULE - SUITABLE FOR A VEHICLE - ENTSPRICHT FÜR FAHRZEUG - ADATTO PER VEICOLO
CONVIENE PARA UN VEHÍCULO - CONVÉM PARA VEÍCULOS - GESCHIKT VOOR VOERTUIG - ODPOWIEDNIE DO POJAZDU
KG KG
FORD
PEUGEOT
8
Read and
follow instruc-
tions for
mounting and
use.
Keep tools,
keys, packag-
ing, mounting
instructions for
future uses.
8
F
ixation
accessories in the
rail: Unclip an end.
R
emove the cen-
tral part of snap
ring .
Fasten the acces-
sory in the rail,
reclip the ends.
7
7
Put the theft
p
rotection covers
and lock with the
k
eys.
6
6
5
C
ut the obtu-
rator O and clip it
on in the apertures
located under the
b
ars.
Check the correct
p
osition and the
appropriate fasten-
ing of the bars (in
the event of prob-
l
em, redo the
m
ounting of the
bars).
5
B
alance the
jutting out of
the bars from the
right/left side of
the vehicle.
Strongly tighten
the screws V1
(8 N.m) using
the tool.
4
4
8 N.m
/