Enterasys ANG-1102 User manual

Type
User manual

This manual is also suitable for

9038127 Page 1 of 2
Installation Guide
ANG-11xx Power Kit
The ANG-11xx Power Kit is designed to firmly secure the unit’s power cord and
avoid disruption of service due to a disconnection. The cord is secured to the side
of the ANG-11xx with an adhesive clip, as shown in Figure 1. Simply attach the
clip an inch or so to the left of the power connector of the ANG-11xx. Then attach
the cord to the clip and plug into the unit.
Figure 1 Power Kit Installation
Page 2 of 2 9038127
Contacting Enterasys Networks Application Note
ANG-11xx Power Kit
Contacting Enterasys Networks
For more information about Enterasys Networks, consult the following table:
Please include your name, title, company, and phone number in all
correspondence. Enterasys Networks offers 7x24 customer support by calling the
Global Technical Assistance Center at 1-800-872-8440 or by sending E-mail to
Notice
Enterasys Networks and its licensors reserve the right to make changes in
specifications and other information contained in this document without prior
notice. The reader should in all cases consult Enterasys Networks to determine
whether any such changes have been made. The hardware, firmware, or software
described in this manual is subject to change without notice.
IN NO EVENT SHALL ENTERASYS NETWORKS AND ITS LICENSORS BE
LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL
DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST
PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR THE
INFORMATION CONTAINED IN IT, EVEN IF ENTERASYS NETWORKS AND
ITS LICENSORS HAVE BEEN ADVISED OF, KNOWN, OR SHOULD HAVE
KNOWN, THE POSSIBILITY OF SUCH DAMAGES.
Enterasys Networks, Inc.
35 Industrial Way
Rochester, NH 03866-5005
© 2002 by Enterasys Networks, Inc.
All Rights Reserved
Printed in the United States of America
The ENTERASYS NETWORKS logo, AUROREAN, PRESCRIPTIVE
DIAGNOSTICS ENGINE, RIVERMASTER, INTELLIGENT CLIENT ROUTING,
and TOLLSAVER are trademarks of Enterasys Networks.
U.S. Office
Address 35 Industrial Way
Rochester, NH 03866
Phone 1-877-641-7400
Fax (603) 337-2211
Internet http://www.enterasys.com
Sales 1-877-641-7400
www.enterasys.com
Support Call Enterasys GTAC at 1-800-872-8440 or email us at [email protected]
  • Page 1 1
  • Page 2 2

Enterasys ANG-1102 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI