Hampton Bay 54616241 Installation guide

Type
Installation guide

This manual is also suitable for

Item # Model #
1000-236-564 54640141
1000-236-636 54616241
1000-236-679 54619141
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this LED light.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
LED SQUARE
11 IN., 12 IN. AND 14 IN.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Table of Content .........................................2
Safety Information......................................2
Warranty .....................................................2
Pre-Installation........................................... 3
Planning Installation............................. 3
Tools Required ..................................... 3
Hardware Included...............................3
Package Contents ................................ 4
Installation..................................................5
Care and Cleaning ......................................6
Troubleshooting..........................................6
Dimmer Compatibility................................. 7
Table of Contents
Warranty
Safety Information
WARNING: Carefully read and understand the information
given in this manual before beginning the assembly and
installation. Failure to do so could lead to electric shock, fire,
or other injuries which could be hazardous or even fatal.
WARNING: Ensure the electricity to the wires you are
working on is shut off. Either remove the fuse or turn off the
circuit breaker.
WARNING: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTICE: Added weight of the device may cause instability
of a free-standing portable luminaire. This device is not
intended for use with emergency exits.
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period
of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be defective, the manufacturer’s only
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations,
neglect, or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of
the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure
not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness
for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any
labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com
2
PLANNING INSTALLATION
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Keep your receipt and these
instructions for proof of purchase.
NOTE: Hardware not shown to
actual size.
Wire
Strippers
Safety
Goggles
Flathead
Screwdriver
Phillips
Screwdriver
Electrical
Tape
Wire
Cutters
Ladder
Gloves
AA BB
Part Description Quantity
AA Wirenut 3
BB Mounting Screw (1 in.) 2
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
The fixture may not be compatible with all dimmers. If you are unfamiliar with electrical installations, we
recommend you have a qualified electrician do your installation.
Remove the existing fixture. Make yourself a sketch of how the current fixture is wired (by wire color) or mark the
wires with masking tape and a pencil so you will know how to reconnect the wires to your new LED fixture.
This fixture does not use a mounting bracket to secure it to the electrical box. Instead, it is secured to the box by
the included screws specifically designed to ground the pan to a metal electrical box. For safe operation, use only
the electrical box screws included in the hardware kit. Screw them into the electrical box until there is about 3/8
in. between the ceiling and the underside of the screw head.
PRODUCT DESCRIPTION AND CHARACTERISTICS
LED ceiling light can be directly mounted to the household ceiling and requires little space. It is energy-saving,
environmentally friendly, and used for emitting soft and even distribution of light.
Pre-Installation
WARNING: Shut off power at the circuit breaker or fuse
panel before removing the old fixture.
PACKAGE CONTENTS
B
A
4
Part Description Quantity
A Flushmount Housing 1
B Flushmount Diffuser 1
Pre-Installation (continued)
Separating the diffuser
from the housing
Open the four diffuser latches.
1
Installing the mounting
screws
Install the mounting screws (BB) in the
junction box.
2
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts
with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Connecting the wires
Connect the black and the white wires
of the fixture with two wires of the
same colors from the junction box.
Secure together using wire nuts (AA).
Connect the grounding wire of the
fixture with the one from the junction
box. Secure together using a wire nut
(AA).
3
Attaching the housing to the
junction box
Align the keyholes in the housing (A)
with the mounting screws (BB). Then
rotate (A) to securely fit to junction box
and tighten screws to secure.
4
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
BB
A
BB
AA
Your fixture is made from quality materials that will last many years with minimum care. You may want to
periodically clean the diffuser, or interior of fixture using a mild, non-abrasive glass cleaner and a soft cloth.
DO NOT use solvents, or cleaners containing abrasive agents. When cleaning the inside of the fixture, make sure
you have the power turned off, and do not spray liquid cleaner directly onto the LEDs, LED driver or wiring.
Problem Possible Cause Corrective Action
The power is off. Check if power supply is on.
The fixture does not light. There is a bad wire connection. Check the wiring.
The switch is defective. Test or replace the switch.
The fuse blows or circuit breaker The wires are crossed or the power wire Check the wiring connections.
trips when the light is turned on. is grounded out.
Minor problems often can be fixed without the help of an electrician.
Mounting to the housing
plate
Position the diffuser (B) over the
housing (A).
5
Closing the diffuser latches
Turn the four diffuser latches to the right
until they are closed.
Restore power to the electrical box. Turn
the light switch on to activate the fixture.
6
6
Installation (continued)
Troubleshooting
Care & Cleaning
CAUTION: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the breaker
off or removing the fuse from the fuse box.
WARNING: Before doing any work on the fixture,
shut off power supply at the circuit panel to avoid
electrical shock.
A
B
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Hampton Bay 54616241 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages