Trendnet TVIP422WN User guide

  • Hello! I've reviewed the user guide for the TRENDnet TV-IP422WN Internet Camera. It covers setup, configuration, and features like dual-codec support, 2-way audio, pan/tilt functionality, and motion detection. I’m ready to answer your questions about this device and its capabilities described in the document.
  • What is the default username and password to access the camera's Web Configuration?
    What are the supported wireless network standards?
    What is the default IP address of the camera if it can't get one through DHCP?
-1-
PREFACE
ThankyouforpurchasingtheSecurViewWirelessNDay/NightPan/Tilt
InternetCamera,apowerfuldualcodecwirelessnetworkcamerawiththe
2wayaudiofunctionthatprovidesthehighqualityimageandonthespot
audioviatheInternetconnection.TheInfraredLEDsandlightsensor
enablethecameratocaptureimageseveninthedarkenvironment.The
camera’span/tiltfunctionsallowyoutocontrolthecameratomonitor
everywhereremotely.ThroughtheGPIOconnectors,thecameracan
attachavarietyofexternaldevicesforyourspecificpurposes.Thecamera
canbeinstalledasastandalonesystemwithinyourapplication
environmenteasilyandquickly,andsupportsremotemanagement
functionsothatyoucanaccessandcontrolitusingaWebbrowseronyour
PC.
ThisAdvancedInstallationGuideprovidesyouwiththeinstructionsand
illustrationsonhowtouseyourcamera,whichincludes:
Chapter1IntroductiontoYourCameradescribesthefeaturesofthe
camera.Youwillalsoknowthecomponentsandfunctionsof
thecamera.
Chapter2HardwareInstallationhelpsyouinstallthecameraaccording
toyourapplicationenvironment.Youcanusethiscameraat
home,atwork,atanywhereyouwant.
Chapter3AccessingtheCameraletsyoustartusingyourcamera
withoutproblem.Thecameracanbesetupeasilyandwork
withinyournetworkenvironmentinstantly.
Chapter4ConfiguringtheCameraguidesyouthroughtheconfiguration
ofthecamerausingtheWebbrowseronyourPC.
Chapter5Appendixprovidesthespecificationofthecameraandsome
usefulinformationforusingyourcamera.
-2-
Contents
PREFACE..................................................................1
INTRODUCTIONTOYOURCAMERA....................................4
1.1CHECKINGTHEPACKAGECONTENTS..............................................4
1.2GETTINGTOKNOWYOURCAMERA...............................................5
1.3FEATURESANDBENEFITS............................................................7
1.4SYSTEMREQUIREMENT...............................................................9
CHAPTER2.............................................................10
HARDWAREINSTALLATION...........................................10
2.1INSTALLINGTHEWALLMOUNTKIT.............................................10
2.2CONNECTINGTHECAMERATOLAN/WLAN................................11
2.3APPLICATIONSOFTHECAMERA..................................................12
CHAPTER3.............................................................13
ACCESSINGTHECAMERA.............................................13
3.1USINGIPSETUP.......................................................................13
3.2ACCESSINGTOTHECAMERA......................................................14
3.3CONFIGURINGTHEIPADDRESSOFTHEPC...................................18
CHAPTER4.............................................................19
CONFIGURINGTHECAMERA..........................................19
4.1USINGTHEWEBCONFIGURATION..............................................19
4.2USINGSMARTWIZARD.............................................................20
4.3BASICSETUP...........................................................................23
4.4NETWORKSETTINGS................................................................28
4.5PAN/TILTSETTINGS.................................................................37
4.6SETTINGUPVIDEO&AUDIO.....................................................38
4.7EVENTSERVERCONFIGURATION.................................................43
4.8MOTIONDETECT.....................................................................47
4.9EVENTCONFIG........................................................................48
4.10TOOLS...................................................................................53
4.11USB......................................................................................55
4.12DEVICEINFO...........................................................................57
-3-
CHAPTER5.............................................................58
SECURVIEWPROSOFTWARE.......................................58
5.1INSTALLATION.........................................................................59
5.2USINGSECURVIEWPRO.........................................................62
CHAPTER6.............................................................93
HOWTOACCESSTHECAMERABEHINDAROUTER..................93
APPENDIX..............................................................99
A.1SPECIFICATION..................................................................................99
A.2GPIOTERMINALAPPLICATION...........................................................102
A.3GLOSSARYOFTERMS........................................................................103
-4-
CHAPTER1
INTRODUCTION TO YOUR
CAMERA
1.1 Checking the Package Contents
Checktheitemscontainedinthepackagecarefully.Youshouldhavethe
following:
5 OneTVIP422WN
5 OnePowerAdapter
5 OneExternalAntenna
5 OneCameraStand/MountingKit
5 OneGPIOConnector
5 OneNetworkCable
5 OneCDROM(Utility&User’sGuide)
5 OneMultiLanguageQuickInstallationGuide
NOTEOnceanyitemcontainedisdamagedormissing,contactthe
authorizeddealerofyourlocale.
-5-
1.2 Getting to Know Your Camera
Front View
Power LED
indicates the camera
is powered on with
the steady amber
light.
Light Sensor
is used to trigger on and off the
Infrared LEDs according the
environmental light level.
USB Port*
allows you to connect an
external USB device. It
provides the power
distribution up to 500mA.
Infrared LEDs (x7)
allow your camera to
capture clear image in
a dark environment.
Internal Microphone
allows the camera to
receive sound and voice.
Link LED
indicates the camera’s
network connectivity
with the flashing green
light.
-6-
Rear View
WPS button
Used to connect to your
encrypted Wireless
network
External Antenna
Connector connects the
external antenna.
GPIO Connectors
is used to connect the
external devices.
Audio-out Connector
connects an external
active speaker.
Reset Button
will restart the camera when it is
pressed quickly; when it is
pressed and held for five
seconds, the camera will resume
the factory default settings.
DC Power Connector
connects the AC power
adapter, in order to
supply power to the
camera.
Ethernet Cable Connector
connects the network cable.
-7-
1.3 FeaturesandBenefits
MPEG4/MJPEGDualcodecSupported
ThecameraprovidesyouwithexcellentimagesbytheMPEG4/MJPEG
dualcodecselectabletechnology,allowingyoutoadjustimagesizeand
quality,andbitrateaccordingtothenetworkingenvironment.
2wayAudioCapability
Thebuiltinmicrophoneofthecameraprovidesonthespotaudioviathe
Internet,allowingyoutomonitortheonsitevoice.Inaddition,youcan
connectanexternalspeakertothecameratospeakthroughthecamera.
Day&NightSurveillanceSupported
ThesevenInfraredLEDsaroundthestandardlensassemblyenablethe
cameratocapturecrystalclearimagesinthedarkenvironmentoratnight.
WhentheLightSensordetectstheenvironmentallightlevelbecomeslow,
thecameracapturestheimagesinblack&whitemodeusingthese
infraredLEDs.
OptimalViewing
Withthepan/tilefunctions,youcaneasilymonitoreverywhereviathe
camerabymovingthecameralenstotheleft/right(165/165degrees)or
up/down(90/15degrees).Inaddition,youcanassignuptoeightpositions
forthecamera,enablingyoutomovethecameralenstothedesired
positionquickly.
SupportsRTSP
ThecamerasupportsRTSP(RealTimeStreamingProtocol),whichisa
technologythatallowsyoutoviewstreamingmediaviathenetwork.You
canviewtherealtimevideowiththeQuickTimeplayerorRealPlayer.To
viewtherealtimestreamingimageonyourcomputer,opentheWeb
browserandentertheRTSPlink:rtsp://(IPaddressofthecamera)/3gp
-8-
SupportsMultipleProfiles
Thecamerasupportsmultipleprofilessimultaneously,sothatyoucan
separatelysetupdifferentimagesettings(suchasimagequalityand
framerate)forthethreevideotypesofthecamera:MPEG4,MJPEG,and
3GPP.
I/OConnectorsProvided
ThecameraprovidestheI/Oconnectorsontherearpanel(IN/OUT),
whichprovidethephysicalinterfacetosendandreceivedigitalsignalsto
avarietyofexternalalarmdevices.Youcanconnectaspecialfeatured
device,andthenconfigurethesettingsandcontrolthedevicefromthe
GPIOTriggerwindowofWebConfiguration.
RemoteControlSupported
ByusingastandardWebbrowserorthebundledSecurViewProsoftware
application,theadministratorcaneasilychangetheconfigurationofthe
cameraviaIntranetorInternet.Inaddition,thecameracanbeupgraded
remotelywhenanewfirmwareisavailable.Theusersarealsoallowedto
monitortheimageandtakesnapshotsviathenetwork.
SupportsConnectiontotheExternalDevices
WiththeauxiliaryInput/Outputconnectors,youcanconnectthecamera
toavarietyofexternaldevices,suchastheexternalspeakerandtheUSB
device.
MultiplePlatformsSupported
Thecamerasupportsmultiplenetworkprotocols,includingTCP/IP,SMTP
email,HTTP,andotherInternetrelatedprotocols.Therefore,youcanuse
thecamerainamixedoperatingsystemenvironment,suchasWindows
VistaandWindows7.
MultipleApplicationsSupported
Throughtheremoteaccesstechnology,youcanusethecamerasto
monitorvariousobjectsandplacesforyourownpurposes.
Forexample,babiesathome,patientsinthehospital,officesandbanks,
andmore.Thecameracancapturebothstillimagesandvideoclips,so
thatyoucankeepthearchivesandrestorethematanytime.
-9-
1.4SystemRequirement
Networking
LAN:10BaseTEthernetor100BaseTXFastEthernet.
WLAN:IEEE802.11b/g,BasedonIEEE802.11nTechnology
AccessingtheCamerausingWebBrowser
Platform:Microsoft®Windows®2000/XP/Vista/Win7
CPU:IntelPentiumIII800MHzorabove
RAM:512MB
Resolution:800x600orabove
UserInterface:Microsoft®InternetExplorer6.0orabove
AccessingtheCamerausingSecurViewPro
Platform:Microsoft®Windows®XP/Vista/Win7
Resolution:1024x768orabove
HardwareRequirement:
1~8cameras:IntelCore2Duo2GBRAM
9~32cameras:IntelCore2Quad4GBRAM
NOTEIfyouconnectmultiplecamerastomonitorvariousplaces
simultaneously,youarerecommendedtouseacomputerwith
higherperformance.
-10-
CHAPTER2
HARDWAREINSTALLATION
2.1InstallingtheWallMountKit
ThecameracomeswithaWallMountKit,whichallowsyoutoplaceyour
cameraanywherebymountingthecamerathroughthethreescrewholes
locatedinthebaseoftheWallMountKit.
Wall Mount Kit
Screw
Screw
Screw
-11-
2.2ConnectingtheCameratoLAN/WLAN
UsetheprovidedEthernetcableto
connectthecameratoyourlocalarea
network(LAN).
WhenyouconnecttheACpower
adapter,thecameraispoweredon
automatically.Youcanverifythe
powerstatusfromthePowerLEDon
thefrontpanelofthecamera.
Onceconnected,theLinkLEDstarts
flashinggreenlightandthecamerais
onstandbyandreadyforusenow.
Ifyouuseawirelessnetworkinyour
applicationenvironment,youneedto
attachtheincludedexternalantenna
tothecamera.
Whenthecameraispoweredon,the
camerawillautomaticallysearchany
accesspointwith“default”SSID.
NOTEIfthecameracannottoyourwirelessnetwork,youneedtoinstall
thecamerainLANandproceedwithWLANsettings.
Connecting the Ethernet Cable
Connecting the External Antenna
-12-
2.3ApplicationsoftheCamera
Thecameracanbeappliedinmultipleapplications,including:
MonitorlocalandremoteplacesandobjectsviaInternetorIntranet.
Capturestillimagesandvideoclipsremotely.
Uploadimagesorsendemailmessageswiththestillimagesattached.
Thefollowingdiagramexplainsoneofthetypicalapplicationsforyour
cameraandprovidesabasicexampleforinstallingthecamera.
HomeApplications
-13-
CHAPTER3
ACCESSINGTHECAMERA
3.1UsingIPSetup
Thecameracomeswithaconvenientlyutility,IPSetup,whichisincludedin
theInstallationCDROM,allowingyoutosearchthecameraonyour
networkeasily.
1. InserttheInstallationCDROMintoyourcomputer’sCDROMdriveto
initiatetheAutoRunprogram.
2. ClicktheIPSetupitemtolaunchtheutility.Thecontrolpanelwill
appearasbelow.
3. OnceyougettheIPaddressofthecamera,launchtheWebbrowser
orSecurViewProtoaccessyourcamera.
ClickAbouttogettheVersioninformationofIPSetup.
ClickLinktoconnecttheselectedcamera.
ClickChangeIPtomodifytheIPaddressoftheselectedcamera.
ClickSearchtofindtheIPaddressoftheconnectedcamera(s).
ClickExittoclosetheutility.
Displaytheconnected
camera(s).
Doubleclicktolinkthe
Camera.
-14-
3.2AccessingtotheCamera
Wheneveryouwanttoaccessthecamera:
1. SincethedefaultconfigurationofthecameraisDHCPmodeenabled,
youarerecommendedtolaunchIPSetuptosearchtheIPaddressthat
isassignedtothecamerabytheDHCPserver,andthenclickLinkto
accessthecameraviatheWebbrowser.
2. IfNetworkCameracan'tgetIPAddressunderDHCPmode,thedefault
IPAddresswillbe192.168.10.30.
3. Whentheloginwindowappears,enterthedefaultUsername(admin)
andpassword(admin)andpressOKtoaccesstothemainscreenof
thecamera’sWebConfiguration.
NOTEIfyouareinitiallyaccesstothecamera,youwillbeasktoinstalla
newpluginforthecamera.Permissionrequestdependsonthe
Internetsecuritysettingsofyourcomputer.ClickYestoproceed.
EntertheUsername
andPassword.
-15-
AfteryouloginintotheWebConfigurationofthecamera,themainpage
willappearasbelow:
ThemainpageoftheWebConfigurationprovidesyouwithmanyuseful
informationandfunctions,including:
CameraInformationDisplaysthecamera’slocationandthecurrent
date&time.TheinformationcanbemodifiedintheWeb
Configuration.
Pan/Tilt Buttons
Compression Buttons
Live View/Setup Switch
Camera Information
Live View Ima
g
e
Zoom In Buttons
Ni
g
htmode Button
Function Buttons
-16-
LiveViewImageDisplaystherealtimeimageoftheconnected
camera.
z MoveyourmousetotheLiveViewareaandclickonanywhere,
thecameralenswillthenmovetothepositionwhereyouclicked
todisplayitinthecentralpartofLiveViewarea.
z WhenyouenlargetheLiveViewbyclickingtheZoomInbuttons
(2xor3x),youcanmovethedisplayedimagebyrightclicking
yourmouseontheLiveViewarea.Thepositionwhereyouright
clickedwillbedisplayedinthecentralpartofLiveViewarea.
ZoomInButtonsClickthebuttonstozoomintheliveviewimageby
1x,2x,and3x.
NightmodeButtonClickthebuttontoenablethe“nightshotmode”
todeliverclearerimagesinthedarkenvironment.However,thiswill
reducetheframerateofvideosetting.
LiveView/SetupSwitchClickSetuptoconfigurethecamera.For
details,seeChapter4andClicktheLiveViewbuttontoreturntothe
Mainscreentoviewtheliveviewimage.
CompressionButtonsSelecttotransmitandrecordthevideousing
MPEG4orMJPEGcompression.
Pan/TiltButtonsProvidesthebuttonstocontrolthecameralens:
z Left/Right/Up/Down/Homebuttonsallowyoutomovethe
cameralensposition.ClickingtheHomebuttonwillmovethe
cameralenstotheassignedhomeposition.
z AutoPatrolbuttoncontrolsthecameratoautomaticallyscanthe
presetpositionsonce.ClickStoptostoppatrolling.
z ClicktheNumberbutton(1~8)tomovethecameralenstothe
presetpositionimmediately.
Tosetupthepresetpositions,movethecameralensbyclicking
theLeft/Right/Up/Downbuttonstothedesiredpositionfirst,then
-17-
selectthenumber(1~8)fromthepulldownlistandclickthe
Applybutton.Youcanenteradescriptivenamefortheassigned
positioninthetextboxtoidentifyiteasily.
FunctionButtonsUsethesebuttonstocontroltheaudio,video,and
triggerfunctions.
z ManualRecordallowsyoutorecordandsaveavideoclip.
z Snapshotallowsyoutocaptureandsaveastillimage.
z Browseallowsyoutoassignthedestinationfoldertostorethe
videoclipsandstillimages.
z Talkallowsyoutospeakoutthroughthecamera.Pleasenote
onlyoneuserisallowedtousethisfunctionatatime.
z Listenallowsyoutoreceivetheonsitesoundandvoicefromthe
camera.
z TriggerOutallowsyoutotriggeron/offtheGPIOoutputmanually.
NOTEIfyourPCuseMicrosoftVistaplatform.Maybeyoucan’tfindthese
recordedfileswhatstoredbySnapshotorManualRecord.That
youneedtodisabletheprotectedmodeofSecurityintheIE
Browser.PleasefollowasbelowSteps:
1.OpenIEBrowser
2.SelectToolsÆInternetOptions
3.SelectSecurity
4.DisabletheEnableProtectedModethenpressOK
-18-
3.3ConfiguringtheIPAddressofthePC
Ifyouarefailedtoaccesstothecamera,pleasechecktheIPaddressof
yourcomputer.Whenyouconnectthecameratoyourcomputerdirectly
toproceedwithconfigurationofthecamera,youneedtosetuptheIP
addressestobeinthesamesegmentforthetwodevicestocommunicate.
1. Onyourcomputer,clickStart>ControlPaneltoopentheControl
Panelwindow.
2. DoubleclickNetworkConnectiontoopentheNetworkConnection
window.
3. RightclickLocalAreaConnectionandthenclickPropertiesfromthe
shortcutmenu.
4. WhentheLocalAreaConnectionPropertieswindowappears,select
theGeneraltab.
5. SelectInternetProtocol[TCP/IP]andthenclickPropertiestobringup
theInternetProtocol[TCP/IP]Propertieswindow.
6. ToconfigureafixedIPaddressthatiswithinthesegmentofthe
camera,selecttheUsethefollowingIPaddressoption.Then,enteran
IPaddressintotheemptyfield.ThesuggestedIPaddressis
192.168.10.x(xis1~254except30),andthesuggestedSubnetmaskis
255.255.255.0.
7. Whenyouarefinished,clickOK.
-19-
CHAPTER4
CONFIGURINGTHECAMERA
4.1UsingtheWebConfiguration
YoucanaccessandmanagethecamerathroughtheWebbrowserandthe
providedsoftwareapplicationSecurViewPro.Thischapterdescribesthe
WebConfiguration,andguidesyouthroughtheconfigurationofthe
camerabyusingtheWebbrowser.
Toconfigurethecamera,clickSetuponthemainpageofWeb
Configuration.TheWebConfigurationwillstartfromtheBasicpage.
TheWebConfigurationcontainsthe
settingsthatarerequiredforthecamerain
theleftmenubar,includingSmartWizard,
Basic,Network,Video/Audio,Event
Server,Motiondetect,EventConfig,
Tools,USB,andInformation.
/