EnGenius ENS202EXT Owner's manual

ENS202EXT
EnGenius
Brand
EnGenius
Model
ENS202EXT
Category
Bridges & repeaters
Type
Owner's manual

EnGenius ENS202EXT is a versatile networking device that can operate in various modes, including access point, client bridge, WDS AP, WDS bridge, WDS station, and client router. It provides wireless connectivity and can be used to extend the range of an existing Wi-Fi network or create a new one. It supports Power over Ethernet (PoE), allowing for flexible installation options. The ENS202EXT features multiple Ethernet ports for wired connections and offers secure wireless connectivity with the option to set up encryption and access control.

EnGenius ENS202EXT is a versatile networking device that can operate in various modes, including access point, client bridge, WDS AP, WDS bridge, WDS station, and client router. It provides wireless connectivity and can be used to extend the range of an existing Wi-Fi network or create a new one. It supports Power over Ethernet (PoE), allowing for flexible installation options. The ENS202EXT features multiple Ethernet ports for wired connections and offers secure wireless connectivity with the option to set up encryption and access control.

Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com Disclaimer: Information may be subject to changes without prior notication. Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
ENS202EXT
Package content
Unpack the box and verify the content:
- ENS202EXT
- PoE injector
- Power adapter
- Quick Start Guide
- Wall mount screw set
- 2* Pole mounting strap
Minimum requirements
- Broadband Internet Service (cable or DSL modem)
- Internet browser (Internet Explorer, Safari, Firefox, Chrome)
Connecting the ENS202EXT
1. Remove the rear bottom panel.
2. Connect one end of the Ethernet cable into the LAN(PoE) port of the
ENS202EXT and the other end to the PoE Ethernet port on the PoE injector.
3. Connect the power adapter to the DC-IN port of the ENS202EXT and plug
the other end into an electrical outlet.
4. Connect the second Ethernet cable into the LAN port of the PoE injector and
the other end to the Ethernet port on the computer.
5. Place the panel removed from step 1 back into the device.
Note: The ENS202EXT should ONLY be powered via Ethernet cable connected
to the included PoE Injector.
Computer setup
1. After ensuring the EnGenius device is powered on and plugged in, ensure
that your computer is on.
2. For the next steps, refer to your ‘operating system’ user manual.
3. Once your computer is on, ensure that your TCP/IP is set to ‘ON’ or
‘ENABLED’. In the control panel, double click network connections and then
double click on the connection of your Network Interface Card (NIC). Select
Internet Protocol (TCP/IP) and then click on the properties button.
4. If your PC is already on a computer network, ensure that you have set it to a
Static IP adress on the interface (or Ethernet card that will use
the ENS202EXT). Set it as 192.168.1.21 and set the subnet mask-address as
255.255.255.0. Select ‘Use the following IP address’-radio button. Once the
computer has been prepared, proceed to setting up the ENS202EXT.
Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com Disclaimer: Information may be subject to changes without prior notication. Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
ENS202EXT
ENS202EXT setup
1. To configure the ENS202EXT, open a web browser (example: Microsoft Inter-
net Explorer, Mozilla Firefox, Google Chrome, etc.)
2. In the adress bar of the web browser, enter: 192.168.1.1 (the default IP
address of the ENS202EXT) and hit ENTER.
3. A login screen will appear. By default, the username of the ENS202EXT is
admin and the password is admin. Enter the current username and password
of the ENS202EXT and then click ‘Login’. Refer to the ENS202EXT user manual
on how to change the username and password.
4. After clicking ‘Login’ with the correct username an password, the
ENS202EXT main menu will appear. If you are successful, proceed to setting up
the wireless connection.
Switching between operating modes
This device can operate in the following modes: Access point, Client bridge,
WDS AP, WDS bridge, WDS station and Client router.
A. Click on the ‘operation mode’ link under the system navigation drop-down
menu.
B. Operating mode: Select an operating mode from the list (Access point, Client
bridge, WDS AP, WDS bridge, WDS station or Client router.) and then click on
the ‘Apply’ button.
C. All basic setup is completed. Note: The wireless connection is not secure. To
setup security on the ENS202EXT, refer to the ENS202EXT user manual.
  • Page 1 1
  • Page 2 2

EnGenius ENS202EXT Owner's manual

ENS202EXT
EnGenius
Brand
EnGenius
Model
ENS202EXT
Category
Bridges & repeaters
Type
Owner's manual

EnGenius ENS202EXT is a versatile networking device that can operate in various modes, including access point, client bridge, WDS AP, WDS bridge, WDS station, and client router. It provides wireless connectivity and can be used to extend the range of an existing Wi-Fi network or create a new one. It supports Power over Ethernet (PoE), allowing for flexible installation options. The ENS202EXT features multiple Ethernet ports for wired connections and offers secure wireless connectivity with the option to set up encryption and access control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents