Winmate WM-OAP8251AG User manual

Brand: Winmate

Model: WM-OAP8251AG

Category: Networking

Type: User manual

Outdoor Enterprise Access Point

WM-OAP8251AG

User Manual

Version 1.0

Document Part Number: 91711110100E

Outdoor Enterprise Access Point WM-OAP8251AG

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described

product(s) conveys no license or title under any patent, copyright, or masks work rights to

these products, and make no representations or warranties that these products are free

from patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes only. We make

no representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product at no

charge to the customer, provide it is returned during the warranty period of one year, with

transportation charges prepaid. The returned product must be properly packaged in its

original packaging to obtain warranty service. If the serial number and the product

shipping data differ by over 30 days, the in-warranty service will be made according to the

shipping date. In the serial numbers the third and fourth two digits give the year of

manufacture, and the fifth digit means the month (e. g., with A for October, B for

November and C for December).

For example, the serial number 1W15Axxxxxxxx means October of year 2015.

Outdoor Enterprise Access Point WM-OAP8251AG

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website

of our distributor to find the update information about the product. Second, contact with

your distributor, sales representative, or our customer service center for technical support

if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Detailed description of the problem

 The exact wording of error messages

In addition, free technical support is available from our engineers every business day. We

are always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Outdoor Enterprise Access Point WM-OAP8251AG

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or

to alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à

la terre incorrecte.

Outdoor Enterprise Access Point WM-OAP8251AG

Federal Communications Commission Radio Frequency Interface Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION/ FCC ATTENTION

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

Tout changement ou modification non expressément approuvé par la partie

responsable de la conformité peut annuler l'autorisation de l'utilisateur d'utiliser

cet équipement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 41 cm

between the radiator & your body.

Outdoor Enterprise Access Point WM-OAP8251AG

CE Interference Statement

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The

following test methods have been applied in order to prove presumption of conformity with the

essential requirements of the R&TTE Directive 1999/5/EC:

• EN60950-1

Safety of Information Technology Equipment

• EN50385

Generic standard to demonstrate the compliance of electronic and electrical apparatus

with the basic restrictions related to human exposure to electromagnetic fields (0 Hz -

300 GHz)

• EN 300 328

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band

and using spread spectrum modulation techniques; Harmonized EN covering essential

requirements under article 3.2 of the R&TTE Directive

• EN 301 893

Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized

EN covering essential requirements of article 3.2 of the R&TTE Directive

• EN 301 489-1

Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment and services; Part 1: Common

technical requirements

• EN 301 489-17

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

Compatibility (EMC) standard for radio equipment and services; Part 17: Specific

conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance

RLAN equipment

This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU

member states and EFTA countries, except in France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in order to

obtain authorization to use the device for setting up outdoor radio links and/or for supplying

public access to telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in France and in some areas the

RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz.

For detailed information the end-user should contact the national spectrum authority in France.

Outdoor Enterprise Access Point WM-OAP8251AG

vii

Safety Information

For your safety carefully read all the safety instructions before using the device. All

cautions and warnings on the equipment should be noted. Keep this user manual for

future reference.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

*Let service personnel to check the equipment in case any of the following

problems appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work

according to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si

vous doutez de leur provenance, contactez le manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

Outdoor Enterprise Access Point WM-OAP8251AG

viii

Professional Installation Instruction

Installation Personal

This product is designed for specific application and needs to be installed by a qualified personal

who has RF and related rule knowledge. The general user shall not attempt to install or change

these settings.

Installation Location

The product shall be installed at a location where the radiating antenna can be kept 41cm from

nearby person in normal operation condition to meet regulatory RF exposure requirement.

External Antenna

Use only the antennas which have been approved by the applicant. Any non-approved antenna(s)

may produce unwanted spurious or excessive RF transmitting power which may lead to the

violation of FCC/IC limit and is prohibited.

Installation Procedure

Please refer to user’s manual for details on proper installation methods.

WARNING! / AVERTISSEMENT!

Please carefully select the installation position and make sure that the final

output power does not exceed the limit set force in the relevant rules. A

violation of these rules could lead to serious federal penalties.

Veuillez sélectionner soigneusement la position d'installation et veiller à ce

que la puissance de sortie finale ne dépasse pas la force de consigne fixée

dans les règles correspondantes. Une violation de ces règles pourrait

entraîner de graves sanctions fédérales.

Outdoor Enterprise Access Point WM-OAP8251AG

About This User Manual

This User Manual provides information about using the Winmate® Outdoor Enterprise Access

Point WM-OAP8251AG.

The documentation set for the WM-OAP8251AG provides information for specific user needs,

and includes:

 The WM-OAP8251AG User Manual – contains detailed description how to use the

display, its components and features.

 The WM-OAP8251AG Quick Start Guide – describes how to get your WM-OAP8251AG

up and running.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Revision History

Version

Date

Note

1.0

15-Nov-2016

Preliminary release

Outdoor Enterprise Access Point WM-OAP8251AG

Contents

Preface ............................................................................................................................... ii

About This User Manual ..................................................................................................... ix

Chapter 1: Introduction ..................................................................................................... 14

1.1 Overview .................................................................................................................. 14

1.2 Product Features ...................................................................................................... 14

1.3 Hardware Specifications .......................................................................................... 15

1.4 Function Block Diagram ........................................................................................... 16

1.5 Package Contents ..................................................................................................... 17

1.6 Minimum Requirements .......................................................................................... 17

1.7 Appearance and Dimensions ................................................................................... 18

Chapter 2: Hardware Installation ....................................................................................... 21

2.1 Connecting the Access Point .................................................................................... 21

2.1.1 Managed Access Point with Wireless Management Switch ......................... 21

2.1.2 Stand-alone Access point Installation ........................................................... 22

Chapter 3: Mounting ......................................................................................................... 24

3.1 Wall Mounting the AP .............................................................................................. 24

3.2 Pole Mount the AP ................................................................................................... 26

Chapter 4: Configuring Your Access Point .......................................................................... 29

4.1 Default Settings ........................................................................................................ 29

4.2 Web Configuration ................................................................................................... 29

Chapter 5: Building a Wireless Network ............................................................................. 32

5.1 Access Point Mode ................................................................................................... 32

5.2 WDS AP Mode .......................................................................................................... 34

5.3 WDS Bridge Mode .................................................................................................... 35

5.4 WDS Station Mode ................................................................................................... 36

5.5 AP Mesh Mode ......................................................................................................... 37

5.6 Mesh Only Mode ...................................................................................................... 38

Chapter 6: Software Settings ............................................................................................. 40

6.1 Main Status .............................................................................................................. 40

6.1.1 Save Changes ................................................................................................. 40

Outdoor Enterprise Access Point WM-OAP8251AG

6.1.2 Device Status ................................................................................................. 40

6.2 Connection ............................................................................................................... 42

6.2.1 Connection List 2.4 GHz/5 GHz ..................................................................... 42

6.2.2 WDS Link List2.4 GHz/5 GHz ......................................................................... 42

6.2.3 The Mesh Link List ......................................................................................... 43

6.3 Network ................................................................................................................... 43

6.3.1 Basic IP Settings ............................................................................................. 43

6.4 Wireless Settings ...................................................................................................... 45

6.4.1 Wireless Settings ........................................................................................... 45

6.4.2 Wireless Network 2.4 GHz/5 GHz .................................................................. 45

6.4.3 SSID Profiles 2.4 GHz/5 GHz .......................................................................... 47

6.4.4 Wireless Security ........................................................................................... 48

6.4.5 Wireless MAC Filtering .................................................................................. 48

6.5 Wireless Advanced ................................................................................................... 49

6.5.1 Wireless Traffic Shaping ................................................................................ 49

6.5.2 WPA-PSK (WPA Pre-Shared Key) Encryption ................................................ 49

6.5.3 WPA Mixed-Enterprise: Access Point / WDS AP Mode ................................. 50

6.5.4 Fast Roaming ................................................................................................. 50

6.5.5 WDS Link Settings .......................................................................................... 51

Chapter 7: Management ................................................................................................... 55

7.1 Management VLAN Settings .................................................................................... 55

7.2 Advanced Settings .................................................................................................... 55

7.2.1 SNMP Settings ............................................................................................... 55

7.2.2 CLI Settings .................................................................................................... 57

7.2.3 Email Alerts .................................................................................................... 57

7.3 Time Zone................................................................................................................. 58

7.3.1 Time Setting ................................................................................................... 58

7.4 Auto Reboot Settings ............................................................................................... 58

7.5 Wi-Fi Scheduler ........................................................................................................ 59

7.6 Tools ......................................................................................................................... 60

7.6.1 Ping Test Parameters ..................................................................................... 60

Outdoor Enterprise Access Point WM-OAP8251AG

xii

7.6.2 Speed Test Parameters/LED Control ............................................................. 61

7.6.3 LED Control .................................................................................................... 61

7.6.4 Device Discovery ........................................................................................... 61

7.7 Account .................................................................................................................... 62

7.7.1 Account Settings ............................................................................................ 62

7.8 Firmware .................................................................................................................. 63

7.8.1 Firmware Upgrade ......................................................................................... 63

7.9 Backup/Restore ........................................................................................................ 63

7.10 Log .......................................................................................................................... 64

7.10.1 System Log ................................................................................................... 64

7.10.2 Remote Log .................................................................................................. 64

7.10.3 Logout .......................................................................................................... 64

7.10.4 Reset ............................................................................................................ 65

Outdoor Enterprise Access Point WM-OAP8251AG

Introduction

This chapter provides the WM-OAP8251AG

Outdoor Enterprise Access Point product

overview, describes its features and hardware

specifications.

User Manual Chapter 1 Introduction

Outdoor Enterprise Access Point WM-OAP8251AG

Chapter 1: Introduction

This chapter provides the Outdoor Enterprise Access Point WM-OAP8251AG product

overview, describes its features and hardware specifications.

1.1 Overview

Thank you for choosing the Winmate® Outdoor Enterprise Access Point.

The WM-OAP8251AG is an enterprise class, outdoor dual radio 2.4G (11n) and 5G (11ac

Wave2) concurrent 4x4 MU-MIMO access point with built-in internal antenna. The

device has two Ethernet ports and one of it is a PSE port that supplies power to the

remote unit. With certified IP67 protection, Winmate® Outdoor Enterprise Access Point

is designed to deliver high reliability under harsh outdoor environment.

1.2 Product Features

Winmate® Outdoor Enterprise Access Point WM-OAP8251AG offers the following

features:

 Main Chip:

o Processor: Qualcomm QCA8068B, dual core, 1.4GHz

o Radios 4x4 dual band dual concurrent

 Radio 1: QCA9990B 4x4 to support 2.4GHz

 Radio 2: QCA9990B 4x4 to support 5GHz

o Ethernet PHY: AR8035B*1 + AR8033B*1 (Industrial graded components)

 Available interface:

o 2 x Gigabit Ethernet (RJ45)

o 1 x Console (RJ45)

o LEDs

o Gore vent for pressure equalization

o N-type connectors for external antenna model

 IP67 compliance enclosure design

 Ethernet surge protection support (4KV)

 OAP8251AG can be powered with 802.3at+ (60W) Power Source on the 1st LAN

port (PD) and provide power to other device through the 2nd LAN port (PSE).

 Max power consumption is < 55W when operating as OAP8251AG and providing

802.3af power on 2

LAN

 Pole mount and wall mount locking mechanism

User Manual Chapter 1 Introduction

Outdoor Enterprise Access Point WM-OAP8251AG

1.3 Hardware Specifications

Model Name

WM-OAP8251AG

Hardware

Specifications

Standard

Dual band dual radio (Concurrent)

Main Chip

MCU: Qualcomm QCA8068B

RF: Qualcomm QCA9990B*2

GE Ethernet PHY: AR8035B + AR8033B

Memory

Flash:

 NAND flash 512MB (Optional)

 SPI NOR flash 32MB

DDR3: 512MB*2 (Note: 1G max.)

Physical Interface

2 x RJ-45 for 10/100/1000 Gigabit Ethernet

8 N-Type connector

1 x RJ-45 console port

5 x LEDs

Surge Protection

EN 61000-4-5 (4KV surges in the ant) (optional)

EN 55024 (4KV surges line to ground)

Power Requirements

PD: IEEE 802.at+ compliance

PSE: IEEE 802.3af

Mechanical

Environment

Temperature Range

Operating -30°C~60°C

Storage -40°C to 70°C (-22°F to 158°F)

Humidity

(non-condensing)

5%~90% typical

Enclosure Design

IP67

Wind Survivability

Up to 145mph (232kph)

Dimensions

(L x W x H)

210mm x 210mm x 51mm

Weight

2.0 kg

Accessory List

PoE Adapter

EAP5006GAT

Bracket (Optional)

Wall Mount, Pole Mount

Cable (Optional)

Grounding cable (Green) AWG10 180cm

Compliance

Standard

Safety

EN60950-1, EN60950-22 (Capable but not certified)

UL/cUL 60950-1. 60950-22 (Capable but not

certified)

Radio Approvals

FCC Part 15.247, 15.407

CE EN300.328, EN301.893

Maximum

Output Power

Maximum

Output Power

2.4GHz: 27.88dBm

5GHz Band 1: 24.84dBm

5GHz Band 4: 27.36dBm

User Manual Chapter 1 Introduction

Outdoor Enterprise Access Point WM-OAP8251AG

1.4 Function Block Diagram

The picture below shows the WM-OAP8251AG function block diagram:

User Manual Chapter 1 Introduction

Outdoor Enterprise Access Point WM-OAP8251AG

1.5 Package Contents

Carefully remove the box and unpack Outdoor Enterprise Access Point WM-OAP8251AG.

Please check if all the items listed below are inside your package. If any of these items

are missing or damaged contact us immediately.

Standard factory shipment list includes the following items:

Access Point

WM-OAP8251AG

Quick Start Guide

(Hardcopy)

User Manual

EzMaster

Software & User

Manual

PoE Injector

Wall Mounting Kit

Pole Mounting Kit

Mounting Screws

and Bolts

Ground Cable

(Green)

AWG10 180cm

Power Adapter

Power Cable

2.4GHz Detachable

Antennas x 4

5GHz Detachable

Antennas x 4

1.6 Minimum Requirements

 Broadband Internet Service

(Cable or DSL Modem)

 Internet Browser

(Internet Explorer, Safari, Firefox, Chrome, Edge)

User Manual Chapter 1 Introduction

Outdoor Enterprise Access Point WM-OAP8251AG

1.7 Appearance and Dimensions

This section includes mechanical drawing and dimensions of the WM-OAP8251AG.

Unit dimensions (L x W x H): 210mm x 210mm x 51mm

Weight: 1.5 kg

Front View

No.

Description

2.4 GHz Antennas: Detachable 5 dBi 2.4 GHz omni-directional

5 GHz Antennas : Detachable 7 dBi 5 GHz omni-directional

LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.

LAN Port 2 (802.3af PSE Output): Ethernet port for RJ-45 cable.

Console/ Reset: Console panel/ reset button.

LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2, 2.4 GHz

Connection and 5 GHz Connection.

User Manual Chapter 1 Introduction

Outdoor Enterprise Access Point WM-OAP8251AG

Rear View

No.

Description

Ground

Mounting Holes: Using the provided hardware, the WM-OAP8251AG can

be attached to a wall or pole.

Optional M12 Connector

Outdoor Enterprise Access Point WM-OAP8251AG

Hardware Installation

This chapter provides information on how to

use external I/O and the installation of the

WM-OAP8251AG hardware.

Page is loading ...

Winmate WM-OAP8251AG User manual

Brand: Winmate

Model: WM-OAP8251AG

Category: Networking

Type: User manual

Download PDF

report

Winmate WM-OAP8251AG User manual

Winmate WM-OAP8251AG User manual

Related papers

Other documents