Page is loading ...
HSP003 Dual Filtration
HEPA Air Purifier
PRODUCT MANUAL
PURE AIR,
ALWAYS.
NOTE:
Remove plastic bag from
filter before use
Notices & Warnings 4
Machine & Spare Parts 5
Components of Product 5
Purification Principle 6
Guidance for Usage 7-8
Filter Reset 9-11
Troubleshooting 12
Customer Support 13
Contents
Power Notice
Notice When
Using The
Machine
Usage
Restrictions
Cleaning
Notice
Tip Over
Warning
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
READ AND SAVE THESE INSTRUCTIONS
4
• Only standard two pin socket is available.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of an electric shock, this plug is intended to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician.
• Hold the plug but not pull the power line when you cut o power, otherwise, it may
cause an electric shock or fire because of a short-circuit.
• Clean the dust on the power line and plug in a timely manner.
• If the power line is damaged, contact the manufacturer or professional engineer to
replace it.
• Don’t use the machine without installing filters.
• Don’t put anything into the air inlet or air outlet.
• Don’t block the air inlet or air outlet.
• Don’t put the machine close to or above a heating device.
• If it’s smoking or emitting a particular smell, cut the power o immediately.
• If there are oil residues, flames, or chemical smells in the air or room, don’t use the
machine.
• Don’t use machine in an environment filled with inflammable gas like hydrogen or
natural gas to avoid an electric shock, fire, and other damages.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state
speed control device.
•
Don’t use the machine on uneven surfaces or a bathroom where there is high
temperature or humidity to avoid an electric shock, fire, or other damages.
•
Don’t clean and use the composite filter repeatedly; clean the machine carefully
because strong corrosive cleaners may destroy the surface of the machine.
•
Use a soft cloth to clean the surface only, otherwise, it may cause damage.
• Don’t use alcohol and organic solvent to clean, otherwise, it may destroy the product
and cause an electric shock or fire.
•
Pull the plug when you don’t use the machine or clean the machine, otherwise, it may
cause an electric shock or fire because of an electrical short circuit.
•
Keep some space around the air purifier so that the wind flows fluidly to improve the
purify eciency.
• This machine is not suitable for the following people: disabled people, perceptual
handicapped, mentally disabled or children.
•
Children climbing is prohibited to prevent them from being injured caused by the
machine falling.
•
Turn o the machine and pull the plug when you move it.
Product Components
HSP003 Machine & Parts
(1) Dual Sided
Air Purifier
Mainframe
(2) HEPA Filters
Remove plastic
bags before use.
(2) Washable
Pre-Filters
User Manual Power Cord
Dual Filtration System
Air Purifier
PRODUCT MANUAL
PURE AIR,
ALWAYS.
Air Outlet
Left Handle
Right Handle
Right Air Inlet
Sensor
Caster
Power Cable
Connector
Control Area
Front Panel
Display Panel
includes status indicator
light and digital display
index.
5
Purification Process
Pre-Filter
Captures large particles like hair, dander, debris, etc.
Composite Filter
H13 HEPA Filter: Removes particles from the air, including dust
and smoke.
Activated Carbon Filter: Removes VOCS like formaldehyde and benzene
and unpleasant odors like smoke.
1
2
6
CONTROL PANEL DIAGRAM
How To Use Air Purifier
Control
Panel
Turn the air purifier on/o.
Press for sleep mode, which runs the
machine at reduced power and low
volume while maintaining air quality.
Press Sleep + Light
keys together 3 seconds
to turn on/o childlock.
Turn the front facing display on/o.
Press to set a sleep timer, time options
are shown on the front facing display.
Set fan speed manually. To enter auto-
mode, press and hold fan speed button
for 3 seconds.
+ = Press these 2 buttons together and hold for 3 seconds
to reset the blinking light that indicates the filter needs
to be changed.
A. The device will turn o automatically when it’s toppled
past 30°, set it right and let it reset before manual shut o.
B. The “ ” blinks white when it’s time to replace your
filter. This recommendation is based on hours used.
NOTICE
7
AIR QUALITY FRONT PANEL DISPLAY
A precision laser sensor detects your air
quality in real-time, reporting the true
concentration of particulate matter (PM) in
your air. Consistent with the Air Quality Index
set by the EPA, a display on the top of the unit
shows your live PM index reading, while a
light strip on the front panel changes colors
according to your EPA index score, so you can
see the air quality from across the room.
How To Use Air Purifier
8
1 EXCELLENT 50 GOOD 100 FAIR 150 POOR 500
AIR QUALITY INDEX INDICATOR
How to Replace Filter
1. Touch “ “ to turn o the device.
2. Open the filter cover.
Notice:
a. Filters are classified as nonflammable rubbish.
Dispose of filters according to local regulations.
b. Your mesh pre-filter can be used repeatedly, wash and
dry your filter regularly for optimal performance.
Hold the handle of the cover
and pull it out.
3. Take the filters out in proper order, put
used filters into garbage bags to prevent
contaminants from falling out.
Pre Filter HEPA Filter
1 2
9
4. When installing the filter, make sure
it’s facing the right way. It will fit snugly
and easily.
Extend the life of your filter by using a vacuum cleaner
to occasionally remove dust.
For optimal performance replace your Hathaspace
filter three times a year.
The mesh pre-filter is washable, clean the filter more
often if you have pets!
This filter does not need to be replaced.
Filter Installation:
HEPA filter pre-filter
HEPA filter
Face this side out
Mesh pre-filter
Face this side out
A. In a high use environment the filter will need to be
replaced more often.
B. Dispose of filters properly according to local guidelines.
HEPA filters are classified as “nonflammable rubbish”.
NOTICE
10
5. To close the cover, match-up the slots on the bottom of the unit and cover so
they align and click into place. Once the cover is closed, it is ok to turn the power
back on.
6. Be sure to reset the “filter
replacement reminder” after
replacing the filters (please refer to
instruction on page 07).
A. Please read the ‘Filter Reset’ instructions carefully to
keep better purification (page 07).
b. Unplug the unit before cleaning.
c. Please keep the air purifier dry to prevent damage or
electrical issues.
NOTICE
11
Troubleshooting
If your air purifier is having issues, please check these common problems first.
Problem Reasons Solution
A. The plug is disconnected.
B. The front panel is not properly
installed.
A. There are lots of pollutant
causing sources in the room,
like smoke from a BBQ.
B. The filters are heavily
polluted.
A. There are no filters installed.
B. The filter still has a bag on it.
C. The air purifier is placed in an
area where airflow is blocked.
D. The filters are dirty.
A. The air purifier has a structural
defect.
B. There are other items inside the
air purifier.
Child lock mode is turned on.
The filters in facing the wrong way. Insure the filters match
the slots channels on the
machine.
A. Contact our Hathaspace
services center.
B. Check and remove items.
See page (07) for child lock/
unlock instructions.
A. Check and re-connect
the plug.
B. Reinstall the front panel.
A. Vent the room to allow
pollutants to escape.
B. Replace new filters.
A. Install a new HEPA filter.
B. Open the front panel, take
the plastic bag o the filter.
C. Remove the obstruction or
move unit to an open location.
D. Replace your filters.
The air purifier
is not working.
Peculiar smell
around air inlet.
Working machine
with low purification
eciency.
The machine is very
noisy.
Touch buttons
are not working.
The filters doesn’t fit
easily.
If you still can’t solve the problem after checking this list,
contact with our service support team at 800-446-0535
or [email protected]. Please don’t repair it by yourself
to avoid danger and damage to the machine.
NOTICE
12
Welcome to the Hathaspace family. For questions, contact us at
In Harmony.
JOIN OUR FILTER CLUB
New filters delivered to your door,
right when you need them.
SCAN
&
SAVE
Hathaspace strives to make every part of your experience exceptional. If you have any
questions or concerns about your air purifier, please feel free to contact our Customer
Support.
Email: [email protected]
Website: https://hathaspace.com
Customer Support
Note: To avoid shortening the life of your air purifier, use only certified Hathaspace
filters for HSP003.
Guidelines:
• Replace filters every 4 months for optimal performance.
• Do not clean the filters with water or other liquids. Use a keyboard duster to
gently remove any physical debris such as lint and hair.
13
www.hathaspace.com
1-800-446-0535
Hathaspace
Manufactured for Hathaspace EPA Est. No. 98681-CHN-1
© Hathaspace. All rights reserved.
HSP003 Dual Filtration
HEPA Air Purifier
/
