Shark UV480 Series Rocket DuoClean Corded Stick Vacuum User manual

Brand: Shark

Model: UV480 Series Rocket DuoClean Corded Stick Vacuum

Category: Vacuum cleaners

Type: User manual

Shark UV480 Series Rocket DuoClean Corded Stick Vacuum:

With its Self-Cleaning Brushroll and UV480 Series technology, the Shark UV480 Series Rocket DuoClean Corded Stick Vacuum is a powerful and versatile cleaning machine.

This vacuum can be used in various modes: upright, above-floor with the wand, and above-floor handheld. It has a brushroll indicator light that lets you know when the brushroll is on, jammed, or not working.

The vacuum has two cleaning settings: Setting I is for bare floors and small area rugs, and Setting II is for carpets. It also comes with a variety of accessories, including:

Shark UV480 Series Rocket DuoClean Corded Stick Vacuum:

With its Self-Cleaning Brushroll and UV480 Series technology, the Shark UV480 Series Rocket DuoClean Corded Stick Vacuum is a powerful and versatile cleaning machine.

The vacuum has two cleaning settings: Setting I is for bare floors and small area rugs, and Setting II is for carpets. It also comes with a variety of accessories, including:

Rocket® DuoClean® with

Self-Cleaning Brushroll

Corded Stick Vac

UV480 Series

OWNER’S GUIDE

sharkclean.comsharkclean.com

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

To reduce the risk of electric shock, this vacuum cleaner has a polarized

plug (one blade is wider than the other). As a safety feature, this plug will

ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the

outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician.

DO NOT force into outlet or try to modify to ﬁt.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

GENERAL WARNINGS

When using an electrical appliance,

basic precautions should always be

followed, including the following:

1. Your vacuum cleaner may consist

of a motorized nozzle, wand, hose,

and/or vacuum pod. This device

contains electrical connections,

electrical wiring, and moving

parts that potentially present risk

to the user.

2. Use only identical replacement parts.

3. Carefully observe and follow

the instructions provided below

to avoid improper use of the

appliance. DO NOT use the vacuum

for any purpose other than those

described in this manual.

4. Before use, carefully inspect all

parts for any damage. DO NOT

use if any parts are damaged.

5. The use of an extension cord is

NOT recommended.

6. This vacuum cleaner contains

no serviceable parts.

USE WARNINGS

7. This appliance can be used by

persons with reduced physical,

sensory or mental capabilities or

lack of experience and knowledge

if they have been given supervision

or instruction concerning use of

the appliance in a safe way and

understand the hazards involved.

Cleaning and user maintenance shall

not be made by children. Keep the

appliance and its cord out of reach of

children. DO NOT allow the appliance

to be used by children. DO NOT allow

to be used as a toy. Close supervision

is necessary when used near children.

8. Always turn off the vacuum cleaner

before connecting or disconnecting

any motorized nozzles or other

accessories.

9. DO NOT handle plug or vacuum

cleaner with wet hands.

10. DO NOT use without filters in place.

11. Only use Shark® branded filters

and accessories. Failure to do so

will also void the warranty.

12. DO NOT damage the power cord:

a) DO NOT pull or carry vacuum

cleaner by the cord or use the

cord as a handle.

b) DO NOT unplug by pulling

on cord. Grasp the plug, not

the cord.

c) DO NOT run the vacuum cleaner

over the power cord, close a

door on the cord, pull the cord

around sharp corners, or leave

the cord near heated surfaces.

13. DO NOT put any objects into nozzle

or accessory openings. DO NOT use

with any opening blocked; keep free

of dust, lint, hair, and anything that

may reduce airflow.

14. DO NOT use if nozzle or accessory

airflow is restricted. If the air

paths or the motorized floor

nozzle become blocked, turn the

vacuum cleaner off and unplug

from electrical outlet. Remove all

obstructions before you plug in

and turn on the unit again.

15. Keep nozzle and all vacuum

openings away from hair, face,

fingers, uncovered feet, or

loose clothing.

16. DO NOT use if vacuum cleaner is

not working as it should, or has

been dropped, damaged, left

outdoors, or dropped into water.

17. Use extra care when cleaning

on stairs.

18. DO NOT leave the vacuum cleaner

unattended while plugged in.

19. When powered on, keep the

vacuum cleaner moving over the

carpet surface at all times to avoid

damaging the carpet fibers.

20. DO NOT place vacuum cleaner

on unstable surfaces such as chairs

or tables.

21. Your Shark® vacuum may not

be designed to stand up on its own.

When taking a break from cleaning,

you may need to lean it against

furniture or a wall, or lay it flat

on the floor. Using the vacuum

for an application where the unit

lacks stability may result in

personal injury.

22. DO NOT use to pick up:

a) Liquids

b) Large objects

c) Hard or sharp objects

(glass, nails, screws, or coins)

d) Large quantities of dust (drywall

dust, fireplace ash, or embers).

DO NOT use as an attachment to

power tools for dust collection.

e) Smoking or burning objects

(hot coals, cigarette butts,

or matches)

f) Flammable or combustible

materials (lighter fluid, gasoline,

or kerosene)

g) Toxic materials (chlorine bleach,

ammonia, or drain cleaner)

23. DO NOT use in the following areas:

a) Poorly lit areas

b) Wet or damp surfaces

c) Outdoor areas

d) Spaces that are enclosed and

may contain explosive or toxic

fumes or vapors (lighter fluid,

gasoline, kerosene, paint,

paint thinners, mothproofing

substances, or flammable dust)

24. Turn off all controls before plugging

in or unplugging the vacuum.

25. Unplug from electrical outlet

when not in use and before

any maintenance or cleaning.

26. Hand wash with water only.

Washing with cleaning chemicals

could damage the unit.

27. During cleaning or routine

maintenance, DO NOT cut anything

other than hair, fibers, or string

wrapped around the brushroll.

28. Allow all filters to air-dry completely

before replacing in the vacuum to

prevent liquid from being drawn

into electric parts.

29. Make sure the dust cup and all

filters are in place after routine

maintenance.

30. If provided, secure the power

cord around the two cord hooks

during storage.

sharkclean.comsharkclean.com

ASSEMBLY

SETTINGS

CLEANING MODES

NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.

NOTE: Select Carpet for stuck-on dust and debris.

NOTE: All accessories are compatible with both the wand and the handheld vacuum.

To clean ﬂoors, place foot on ﬂoor nozzle

and tilt handheld vacuum back.

UPRIGHT

Detach the wand for more reach to clean

baseboards, ceiling fans, window sills, and other

hard-to-access areas. Stand the vacuum upright,

then step on the foot pedal on the left side of the

ﬂoor nozzle and pull the wand up to disconnect it.

ABOVE-FLOOR WITH WAND

Press the Wand Release button to lift the handheld

vacuum o the wand. Attach the handheld vacuum

to an accessory or directly to the nozzle. Great for

cleaning stairs and furniture.

ABOVE-FLOOR HANDHELD

(Click)

1 2

1. Insert Wand into Floor Nozzle.

2. Insert Handheld Vacuum into wand.

Ensure all connections click securely into place.

Slide switch to the bottom

to turn o power. To begin

vacuuming, slide switch to

the appropriate setting.

Bare Floor/Small Area Rugs

The brushroll spins slowly to

clean bare ﬂoors and delicate

arearugs.

Carpet

The brushroll spins faster

to pick up debris below

the surface of your carpet.

OFF SETTING I SETTING II

WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

Solid Green

The brushroll is on and working as it should.

Solid Red

There is a jam in the brushroll area. Turn your vacuum o and remove the blockage.

No Light: The vacuum is o or in the upright position.

Flashing Red: The vacuum has overheated. See Troubleshooting section.

sharkclean.comsharkclean.com

STORAGE

Press the wand release button on the top of the

wand to detach the handheld vacuum. Align the

catch on the bottom of the handheld vacuum with

the storage hook on the wand. Slide the handheld

vacuum down so the catch hangs from the storage

hook. Wrap the cord around the two cord hooks,

starting with the top hook, leaving a little slack.

For convenient storage above the ﬂoor, a wall mount

is available for purchase on sharkaccessories.com. It

comes with hardware and an instruction sheet with

a mounting template.

AVAILABLE ACCESSORIES

A 12" Crevice Tool

Clean in tight spaces or reach baseboards and

ceilings with this slim crevice tool.

B Dusting Brush

Dust shelves, baseboards, window and door

frames, and much more. Turn the brush head to

adjust the angle to the surface you’re cleaning.

C Pet/Upholstery Tool

Perfect for grabbing pet hair and lint from

furniture and other upholstered surfaces.

D Pet Multi-Tool

A single convertible tool for cleaning tough

pet messes two ways: ﬁrst, use the sti bristle

brush to clean stuck-on debris, or take o the

bristles to reveal an upholstery tool perfect for

removing stubborn pet hair and large piles of

debris.

E Duster Crevice Tool

Two cleaning tools in one. The crevice tool gives

you extended reach to clean in tight spaces,

while the soft brush is ideal for dusting delicate

surfaces.

F Anti-Allergen Dust Brush

Features nylon ﬁber bristles speciﬁcally

designed for removing ﬁne dust and allergen

particles from the most delicate surfaces.

G Mini Motorized Brush

the clingiest pet hair and extracts dirt, dust,

dander, and allergens from deep inside pillows,

upholstery, and carpets.

H Under-Appliance Wand

Clean under and behind hard-to-move appliances

and furniture with this adjustable 36” tool. Flip the

extension piece over to clean the underside

of appliances.

I Precision Duster

Flexible tube with micro-duster crevice tool on

the end for cleaning around delicate objects and

in dicult-to-reach spots like car interiors and

computer keyboards.

J Flexible Hose

Stretch and ﬂex this extension hose to clean

around objects and get into hard-to-reach spaces.

Attach the crevice tool or another accessory

depending on what you are cleaning.

K Onboard Storage Clip

Removable clip attaches to the vacuum wand. Can

hold up to two accessories at a time while cleaning

or for storage.

L Wall Mount

Install the mount to hang your vacuum on the wall

for convenient storage. Includes screws, anchors,

and instruction sheet with mounting template for

easy installation.

NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's

configuration. To order additional accessories, visit sharkaccessories.com.

ONBOARD HOOK WALL MOUNT

K L

NOTE: Wrap the power cord around the top hook ﬁrst,

leaving a little slack while wrapping.

sharkclean.comsharkclean.com

MAINTENANCE

EMPTYING THE DUST CUP

Press the wand releasebutton and lift the handheld

vacuum o the wand.

With the dust cup attached to the handheld vacuum,

press the Empty button on the front of the dust cup.

To remove the dust cup from the handheld vacuum,

squeeze the two Dust Cup Release buttons at the

same time and pull out the dust cup. Press the Empty

button on the front of the dust cup.

The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in

the dust cup reaches the MAX ﬁll line.

IMPORTANT: Unplug the vacuum before performing any maintenance.

Empty

Dust Cup

Release

Perform regular maintenance on the ﬁlters to keep your vacuum's suction power optimal.

IMPORTANT:

To prevent damage, rinse ﬁlters with water

ONLY

DO NOT

use soap. Allow ﬁlters to air-dry for

at least 24 hours before reinstalling them to prevent liquid from being drawn into electricparts.

MAINTENANCE

CLEANING FILTERS

IMPORTANT: Unplug the vacuum before performing any maintenance.

PRE-MOTOR FILTERS POST-MOTOR FILTER

Replacement Pre-Motor Filter Kit

XPMFK320

Replacement Post-Motor Filter

1084FTV320

REPLACEMENT FILTERS

Wash the pre-motor ﬁlters once a month. Wash the post-motor ﬁlter every 9 months.

NOTE: The pre-motor ﬁlters should be replaced every 2.5 years. The post-motor ﬁlter should be replaced every 3 years.

sharkclean.comsharkclean.com

MAINTENANCE

CHECKING FOR BLOCKAGES

MAINTENANCE

Remove the wand from the handheld vacuum and

check all dust cup intake openings.

Detach the wand. To open the brushroll garage, slide

both release buttons on the ﬂoor nozzle away from

you, toward the back of the nozzle, then lift o the lid.

Tilt back the neck of the nozzle and check openings

for blockages. To close the brushroll garage, insert

the 3 tabs on top of lid into the 3 slots in the nozzle,

then push down ﬁrmly on both sides of the lid until it

clicks securely into place.

Detach the wand and check it for blockages.

NOZZLE MAINTENANCE

NOTE: With normal use, you may need to perform routine maintenance of your Soft Roller.

NOTE: If the brushroll indicator light is green and the headlights are ﬂashing, check again that both sides of the lid are locked

in place.

CLEANING THE SELF-CLEANING BRUSHROLL

If any hair is wrapped around the brushroll, continue cleaning, using Carpet mode on a bare ﬂoor surface, a

low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send

it to the dust cup.

If some ﬁbers remain wrapped around the brushroll after continued use, open the brushroll garage to remove

them.

1 To open the brushroll garage, slide both release buttons on the ﬂoor nozzle away from you, toward the

back of the nozzle, then lift o the lid.

2 Clear away any objects or debris.

3 To close the brushroll garage, insert the 3 tabs on top of lid into the 3 slots in the nozzle, then push down

on both sides of lid until it clicks securely into place. If Brushroll Indicator Light is green and headlights

are ﬂashing, check again that both sides of lid are locked in place.

CLEANING THE SOFT ROLLER

1 To remove Soft Roller from nozzle, ﬁrst open the brushroll garage, then pull the Soft Roller out by the tab.

2 Tap loose debris o the Soft Roller. Use a dry towel to wipe the Soft Roller clean, and to remove any debris

caught in the teeth behind the Soft Roller.

Hand wash the Soft Roller as needed. Use only water, and let air-dry completely for at least 24 hours.

Reinsert the Soft Roller and close the brushroll garage by inserting the 3 tabs on top of the lid into the 3 slots

in the nozzle. Then push down on both sides of the lid until it clicks securely into place. If Brushroll Indicator

Light is green and headlights are ﬂashing, check again that both sides of the lid are locked in place.

1 2

CHECK HANDHELD

CHECK FLOOR NOZZLE

CHECK WAND

sharkclean.comsharkclean.com

TROUBLESHOOTING

For all other issues, visit sharkclean.com/support.

Vacuum is not picking up debris. No suction or light suction.

(Refer to Maintenance section for more information.)

• Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the

ﬁlters before reinserting in the vacuum.

• Dust cup may be full; empty dust cup.

• Check ﬂoor nozzle and wand for blockages; clear blockages if required.

• Remove any string, carpet ﬁbers, or hair that may be wrapped around the brushroll or Soft Roller.

• Ensure the brushroll garage is locked in place by pushing down on both sides of the lid until it clicks

securely into place.

Vacuum lifts area rugs.

• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.

• Turn o the unit to disengage the brushrolls. To restart, slide the power switch to setting I, Bare Floor/

Small Area Rugs.

Brushrolls do not spin.

• If the Brushroll Indicator Light is solid red, immediately turn o and unplug the vacuum. Disconnect

wand from ﬂoor nozzle and clear any blockages from the air path in the nozzle and from the brushrolls.

Reconnect wand, plug in vacuum, and turn on power.

• If the Brushroll Indicator Light is solid green and the LED headlights are ﬂashing, the brushroll garage lid is

not completely closed. Press down ﬁrmly on all sides of the lid until it clicks into place.

• If Brushroll Indicator Light on the

ﬂoor nozzle

is green, the blockage has been successfully cleared and the

brushroll garage lid is completely closed. If the light is still red, please contact Customer Service at 1-800-

798-7398.

Vacuum turns o on its own or if the indicator light ﬂashes red.

This vacuum is equipped with a motor-protective thermostat so it will shut o if it overheats. Should this

occur, perform the following steps to restart the motor-protective thermostat:

1. Turn vacuum o and unplug it.

2. Empty dust cup and clean ﬁlters (see Maintenance section).

3. Separate the ﬂoor nozzle from the wand. Remove the brushroll garage lid to check the air path,

brushroll, and Soft Roller for blockages.

4. Check for blockages in the wand, handheld vacuum inlet openings, and accessories.

5. Allow unit to cool for a minimum of 60 minutes.

6. Plug in vacuum and turn it on.

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja

Operating LLC. Warranty coverage applies to the original owner and to the original product only and is

not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period

of ﬁve (5) years from the date of purchase when it is used under normal household conditions and

maintained according to the requirements outlined in the Owner’s Guide, subject to the following

conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,

will be repaired or replaced up to ﬁve (5) years from the original purchase date.

2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the

receipt date of the replacement unit or the remainder of the existing warranty, whichever is later.

SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as foam ﬁlters, HEPA ﬁlters, pads, etc.), which require

regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered

by this warranty. Replacement parts are available for purchase at sharkaccessories.com.

2. Any unit that has been tampered with or used for commercial purposes.

3. Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling,

failure to perform required maintenance (e.g., not cleaning the ﬁlters), or damage due to mishandling

in transit.

4. Consequential and incidental damages.

5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused

in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the

repair is performed by a repair person not authorized by SharkNinja.

6. Products purchased, used, or operated outside North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty

period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service

Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options,

including the possibility of upgrading to our VIP warranty service options for select product categories. So

we may better assist you, please register your product online at registeryourshark.com and have the product

on hand when you call.

SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of

$24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase.

We also ask that you register your product online at registeryourshark.com and have the product on hand

when you call, so we may better assist you. A Customer Service Specialist will provide you with return and

packing instruction information.

How state law applies

This warranty gives you speciﬁc legal rights, and you also may have other rights that vary from state to

state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the

above may not apply to you.

FIVE (5) YEAR LIMITED WARRANTY

sharkclean.comsharkclean.com

NOTES

TECHNICAL SPECIFICATIONS

Voltage: 120V, 60Hz

Watts: 500W

Amps: 4.2A

RECORD THIS INFORMATION

Model Number: ��

Date Code: ��

Date of Purchase: ��

(Keep receipt)

Store of Purchase: ��

registeryourshark.com

Scan QR code using

mobile device

TIP: The model number is on the rating label

behind the dust cup.

TIP: The date code is on one of the prongs

of the power cordplug.

Beneﬁts of registering your product and

creating an account:

• Get easier, faster product support and

access to warranty information

• Access troubleshooting and product care

instructions

• Be among the ﬁrst to know about

exclusive product promotions

of SharkNinja Operating LLC.

UV480�IB�E�MP�Mv5

PRINTED IN CHINA

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you get a complete understanding of your new Shark®

Rocket® DuoClean® with Self-Cleaning Brushroll Corded Stick Vac.

SharkNinja Operating LLC

US: Needham, MA 02494

CAN: Ville St-Laurent, QC H4S 1A7

1-800-798-7398

sharkclean.com

Illustrations may dier from actual product. We are constantly striving to improve our products;

therefore the speciﬁcations contained herein are subject to change without notice.

For SharkNinja U.S. Patent information, visitsharkninja.com/uspatents

Shark UV480 Series Rocket DuoClean Corded Stick Vacuum User manual

Brand: Shark

Model: UV480 Series Rocket DuoClean Corded Stick Vacuum

Category: Vacuum cleaners

Type: User manual

Shark UV480 Series Rocket DuoClean Corded Stick Vacuum:

With its Self-Cleaning Brushroll and UV480 Series technology, the Shark UV480 Series Rocket DuoClean Corded Stick Vacuum is a powerful and versatile cleaning machine.

The vacuum has two cleaning settings: Setting I is for bare floors and small area rugs, and Setting II is for carpets. It also comes with a variety of accessories, including:

Download PDF

report

Shark UV480 Series Rocket DuoClean Corded Stick Vacuum User manual

Shark UV480 Series Rocket DuoClean Corded Stick Vacuum User manual

Related papers

Other documents