Page is loading ...
EMC Corporation
171 South Street
Hopkinton, MA 01748-9103
Corporate Headquarters: (508) 435-1000, (800) 424-EMC2
Fax: (508) 435-5374 Service: (800) SVC-4EMC
Connectrix DS-32M2
Fibre Channel Switch
USER GUIDE
P/N 069001176
REV A01
Connectrix DS-32M2 User Guide
ii
Copyright © 2001 – 2002 EMC Corporation. All rights reserved.
Printed May 2002
EMC believes the information in this publication is accurate as of its publication date. The information is
subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable
software license.
Regulatory Agency Information
The Connectrix DS-32M2 has been extensively tested and certified to meet UL1950, CSA 22.2 No 950, IEC
60950/EN60950; Safety of Information Technology Equipment including Electrical Business Equipment,
FCC Rules Part 15 Subpart B; CISPR22 Class A; European EMC Directive 89/336/EEC on, electromagnetic
compatibility.
The Connectrix DS-32M2 is a Stationary Pluggable Type B system.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning!
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Achtung!
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes
Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmaßnahmen
verantwortlich ist.
Attention!
Ceci est un produit de Classe A. Dans un environnement domestique, ce produit risque de créer des
interférences radioélectriques, il appartiendra alors à l'utilisateur de prendre les mesures spécifiques
appropriées.
Connectrix DS-32M2 User Guide iii
This equipment generates, uses, and may emit radio frequency energy. The equipment has been type tested
and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC rules, which are
designed to provide reasonable protection against such radio frequency interference.
Operation of this equipment in a residential area may cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct the interference.
Any modifications to this device - unless expressly approved by the manufacturer - can void the user’s
authority to operate this equipment under part 15 of the FCC rules.
Laser Compliance Statement
Laser transceivers used in the DS-32M2 are tested and certified in the United States to conform to Title 21
of the Code of Federal Regulations (CFR), Subchapter J, Parts 1040.10 and 1040.11 for Class 1 laser products.
Elsewhere, the transceivers are tested and certified to be compliant with International Electrotechnical
Commission IEC825-1 and European Norm EN60825-1 and EN60825-2 regulations for Class 1 laser
products.
Class 1 laser products are not considered hazardous. The transceivers are designed such that there is never
human access to laser radiation above a Class 1 level during normal operation or prescribed maintenance
conditions.
Trademark Information
EMC2, EMC, CLARiiON, MOSAIC:2000, Navisphere, and Symmetrix are registered trademarks and EMC Enterprise Storage, The Enterprise Storage
Company, The EMC Effect, Access Logix, Connectrix, EDM, MirrorView, SDMS, SnapView, SnapView/IP, SRDF, TimeFinder, PowerPath, InfoMover,
FarPoint, EMC Enterprise Storage Network, EMC Enterprise Storage Specialist, EMC Storage Logic, Universal Data Tone, E-Infostructure, and Celerra
are trademarks of EMC Corporation.
All other trademarks used herein are the property of their respective owners.
Connectrix DS-32M2 User Guide
iv
Connectrix DS-32M2 User Guide v
Preface......................................................................................................................... xvii
Warnings and Cautions.......................................................................................... xxi
Chapter 1 Switch Operating Features
Overview........................................................................................... 1-2
DS-32M2 Description ...................................................................... 1-3
Features...................................................................................... 1-3
Front Panel................................................................................. 1-3
CTP ............................................................................................. 1-5
Rear Panel.................................................................................. 1-5
Connectrix Service Processor ......................................................... 1-7
Embedded Web Server............................................................. 1-7
Hardware Features .......................................................................... 1-8
Performance Features............................................................... 1-8
Switch Management................................................................. 1-9
High-Availability Features .................................................... 1-10
Connectivity Features ............................................................ 1-11
Security Features..................................................................... 1-12
Serviceability Features ........................................................... 1-13
Hardware Operations.................................................................... 1-15
Updating Firmware................................................................ 1-15
Switch Operational States...................................................... 1-15
IML............................................................................................ 1-16
IPL............................................................................................. 1-17
Contents
Connectrix DS-32M2 User Guide
vi
Contents
Chapter 2 Operating the Switch
Power Procedures............................................................................ 2-2
Power the Switch On ............................................................... 2-2
FRU LEDs and Connectors............................................................. 2-4
LEDs ........................................................................................... 2-4
Connectors................................................................................. 2-6
Chapter 3 Product Manager Overview
Product Manager Overview........................................................... 3-2
Using the Product Manager ........................................................... 3-5
Using Dialog Boxes .................................................................. 3-5
Logging Into the Connectrix Manager.................................. 3-6
Opening the Product Manager............................................. 3-10
Closing the Product Manager............................................... 3-11
Closing the Connectrix Manager.......................................... 3-11
Product Manager Menu Bar......................................................... 3-12
Product Manager Views................................................................ 3-17
Hardware View....................................................................... 3-17
Node List View ....................................................................... 3-18
Port List View.......................................................................... 3-19
Performance View .................................................................. 3-19
FRU List View ......................................................................... 3-20
User Rights ..................................................................................... 3-21
User Rights for Specific Functions....................................... 3-22
Chapter 4 Monitoring and Managing the Switch
Using the Hardware View.............................................................. 4-2
Identifying FRUs ...................................................................... 4-2
Monitoring Switch Operation................................................. 4-2
Obtaining Hardware Information.......................................... 4-8
Using Menu Options.............................................................. 4-13
Using the Node List View............................................................. 4-17
Displaying Node Properties.................................................. 4-19
Displaying Port Properties.................................................... 4-19
Defining Nicknames .............................................................. 4-19
Using the Port List View............................................................... 4-21
Displaying Port Properties.................................................... 4-23
Menu Options ......................................................................... 4-23
Using the Performance View ....................................................... 4-25
Bar Graph Display.................................................................. 4-26
Port Statistics........................................................................... 4-27
vii
Connectrix DS-32M2 User Guide
Contents
Menu Options......................................................................... 4-31
Using the FRU List View.............................................................. 4-33
Port Operational States................................................................. 4-35
Alerts............................................................................................... 4-37
Link Incident Alerts............................................................... 4-37
Threshold Alerts..................................................................... 4-38
Chapter 5 Configuring the Switch
Configuring Switch Identification................................................ 5-2
Configuring the Operating Mode................................................. 5-4
Configuring Operating Parameters.............................................. 5-6
Operating Parameters ............................................................. 5-7
Configuring Ports.......................................................................... 5-11
Port Parameters...................................................................... 5-12
Configuring Port Binding ..................................................... 5-16
Configuring Port Addresses........................................................ 5-18
Address Parameters............................................................... 5-20
Managing Stored Address Configurations................................ 5-22
Configuring the SNMP Agent..................................................... 5-24
Configuring Management Server Control................................. 5-27
Open Systems Management Server..................................... 5-27
Configuring the Feature Key....................................................... 5-28
Configuring the Date and Time .................................................. 5-31
Configuring Threshold Alerts ..................................................... 5-33
Creating New Alerts.............................................................. 5-34
Modifying Alerts.................................................................... 5-39
Activating or Deactivating Alerts........................................ 5-40
Deleting Alerts........................................................................ 5-40
Exporting a Configuration Report.............................................. 5-41
Report Data............................................................................. 5-41
Export Procedure ................................................................... 5-41
Enabling the Embedded Web Server.......................................... 5-43
Enabling Telnet .............................................................................. 5-44
Chapter 6 Using Logs
Using Logs........................................................................................ 6-2
Button Function........................................................................ 6-2
Expanding Columns................................................................ 6-3
Sorting Entries .......................................................................... 6-3
Audit Log ......................................................................................... 6-4
Event Log.......................................................................................... 6-6
Connectrix DS-32M2 User Guide
viii
Contents
Hardware Log .................................................................................. 6-8
Link Incident Log............................................................................. 6-9
Threshold Alert Log ...................................................................... 6-11
Chapter 7 Using Maintenance Features
Running Port Diagnostics............................................................... 7-2
Swapping Ports................................................................................ 7-3
Procedure................................................................................... 7-3
Collecting Maintenance Data......................................................... 7-5
Executing an IPL.............................................................................. 7-6
Setting the Online State................................................................... 7-8
Managing Firmware Versions........................................................ 7-9
Enabling E-Mail Notification ....................................................... 7-10
Enabling Call-Home Notification................................................ 7-11
Backing Up and Restoring the Configuration........................... 7-12
Backup...................................................................................... 7-12
Restore...................................................................................... 7-13
Automatic Backup to Zip Disk............................................. 7-14
Using QuikSync...................................................................... 7-15
Resetting the Configuration ......................................................... 7-18
Note on IP Address ................................................................ 7-18
Procedure................................................................................. 7-18
Appendix A Using SNMP to Manage the Switch
Introduction .................................................................................... A-2
SNMP Support ............................................................................... A-5
V6 MIB Support....................................................................... A-6
SNMPv1 Transports ...................................................................... A-8
Agent Configuration............................................................... A-8
MIB-II Support ............................................................................... A-9
Fibre Channel Fabric Element MIB Support ............................ A-10
Error Group Table.................................................................. A-11
Accounting: Class 1............................................................... A-12
Accounting: Class 2............................................................... A-13
Accounting: Class 3............................................................... A-14
Operation: F_Port Operation Table..................................... A-15
Operation: F_Port Physical Level Table ............................. A-16
Configuration Group ............................................................ A-18
Capability Group Table......................................................... A-21
Connectrix Private Enterprise MIB (ef-6000) ........................... A-22
System Group......................................................................... A-23
FRU Group ............................................................................. A-24
ix
Connectrix DS-32M2 User Guide
Contents
Fibre Channel Port Group ................................................... A-25
Port Binding Group .............................................................. A-29
Zoning Group........................................................................ A-29
Generic Traps......................................................................... A-31
Enterprise Specific Trap ....................................................... A-31
Appendix B Configuring Network Addresses
Configuring Network Addresses.................................................. B-2
Appendix C Configuring the Switch from a Web Server
Introduction ................................................................................... C-2
Web Server Requirements...................................................... C-4
Opening the Web Server Application .................................. C-5
Configuring Switch Ports ............................................................. C-7
Configuring Switch Identification .............................................. C-8
Configuring the Date and Time ................................................ C-10
Configuring Operating Parameters ........................................... C-11
Configuring Network Information ........................................... C-14
Configuring SNMP Trap Message Recipients ......................... C-16
Configuring Zoning .................................................................... C-18
Configuring User Rights ............................................................ C-21
Appendix D Command Line Interface
Telnet Sessions ............................................................................... D-2
Ethernet Connection Loss...................................................... D-2
CLI Overview ................................................................................. D-3
Entering CLI Commands....................................................... D-4
login ........................................................................................ D-11
logout...................................................................................... D-12
commaDelim.......................................................................... D-12
Handling Command Line Interface Errors ....................... D-13
Using CLI Help ..................................................................... D-13
Commenting Scripts............................................................. D-14
The config Branch ....................................................................... D-15
config.port.speed................................................................... D-19
config.zoning ......................................................................... D-38
maint ............................................................................................. D-47
perf ................................................................................................. D-50
show .............................................................................................. D-57
Connectrix DS-32M2 User Guide
x
Contents
Appendix E Specifications
Specifications .................................................................................. E-2
Appendix F Customer Support
Overview of Detecting and Resolving Problems ....................... F-2
Troubleshooting the Problem ........................................................ F-3
Before Calling the Customer Support Center ............................. F-4
Documenting the Problem ............................................................ F-5
Reporting a New Problem ............................................................. F-6
Sending Problem Documentation ................................................ F-7
Glossary ........................................................................................................................ g-1
Index................................................................................................................................ i-1
Connectrix DS-32M2 User Guide xi
1-1 DS-32M2, Front View ................................................................................... 1-4
1-2 DS-32M2 Fans ............................................................................................... 1-6
1-3 Switch Management ................................................................................... 1-10
2-1 AC Power Switch Locations ....................................................................... 2-2
2-2 Front Panel LEDs and Connectors ............................................................. 2-4
2-3 Rear Panel LEDs and Connectors .............................................................. 2-4
3-1 Connectrix Service Processor and Remote Workstation Configuration 3-4
3-2 Typical Dialog Box ....................................................................................... 3-5
3-3 Connectrix Manager Login Window ......................................................... 3-7
3-4 Connectrix Manager Products View .......................................................... 3-8
3-5 Product Manager Window ........................................................................ 3-10
3-6 Product Manager Menu Bar ...................................................................... 3-12
3-7 Product Manager View Selector Tabs ..................................................... 3-17
3-8 Product Manager Hardware View ........................................................... 3-17
4-1 Monitoring Hardware Operation Using the Hardware View ............... 4-6
4-2 Clear Threshold Alert(s) Window ........................................................... 4-16
4-3 Node List View ........................................................................................... 4-17
4-4 Define Nickname Dialog Box ................................................................... 4-19
4-5 Port List View .............................................................................................. 4-21
4-6 Clear Threshold Alert(s) Window ........................................................... 4-24
4-7 Performance View ...................................................................................... 4-25
4-8 Clear Threshold Alert(s) Window ........................................................... 4-32
4-9 FRU List View ............................................................................................. 4-33
4-10 Clear Link Incident Alert Window .......................................................... 4-38
5-1 Configure Identification Dialog Box .......................................................... 5-2
5-2 Set Online State Window ............................................................................. 5-4
5-3 Configure Operating Mode Dialog Box .................................................... 5-5
5-4 Set Online State Window ............................................................................. 5-6
5-5 Configure Operating Parameters Dialog Box .......................................... 5-7
5-6 Configure Ports Dialog Box ...................................................................... 5-11
Figures
xii Connectrix DS-32M2 User Guide
Figures
5-7 Bound WWN Mismatch Warning ............................................................ 5-12
5-8 Bind WWN Dialog Box .............................................................................. 5-16
5-9 Configure Addresses - “Active” Dialog Box ........................................... 5-18
5-10 Save Address Configuration Dialog Box ................................................. 5-19
5-11 Prohibited Port Connection Symbol ......................................................... 5-21
5-12 Address Configuration Library Dialog Box ............................................ 5-22
5-13 Configure SNMP Dialog Box .................................................................... 5-25
5-14 Configure Open Systems Management Server Window ...................... 5-27
5-15 Set Online State Window ........................................................................... 5-28
5-16 Configure Feature Key Window ............................................................... 5-29
5-17 New Feature Key Dialog Box .................................................................... 5-29
5-18 Enable Feature Key Dialog Box ................................................................. 5-30
5-19 Configure Date and Time Dialog Box ...................................................... 5-31
5-20 Configure Threshold Alerts Window ...................................................... 5-34
5-21 New Threshold Alerts Window — First Screen ..................................... 5-35
5-22 New Threshold Alerts Window — Second Screen ................................ 5-36
5-23 New Threshold Alerts Window — Third Screen ................................... 5-37
5-24 New Threshold Alerts Window — Summary Screen ............................ 5-38
5-25 Configure Threshold Alerts Window — Activate Alert ....................... 5-39
5-26 Export Configuration Report Window .................................................... 5-42
6-1 Save Window ................................................................................................. 6-2
6-2 Audit Log ....................................................................................................... 6-4
6-3 Event Log ....................................................................................................... 6-6
6-4 Hardware Log ................................................................................................ 6-8
6-5 Link Incident Log .......................................................................................... 6-9
6-6 Threshold Alert Log .................................................................................... 6-11
7-1 Swap Ports Dialog Box ................................................................................. 7-3
7-2 Set Online State Window ............................................................................. 7-8
7-3 Backup and Restore Configuration Window .......................................... 7-13
7-4 QuikSync Icon in Windows System Tray ................................................ 7-15
7-5 Iomega QuikSync Dialog Box ................................................................... 7-16
7-6 Iomega QuikSync Dialog Box (Advanced Tab) ...................................... 7-17
A-1 MIB Tree ........................................................................................................ A-3
A-2 MIB Tree ........................................................................................................ A-4
A-3 SNMP MIB-II Support ................................................................................. A-9
A-4 Fibre Channel Fabric Element MIB Supported ...................................... A-10
A-5 Private Enterprise MIB Support ............................................................... A-22
B-1 Connection Description Dialog Box .......................................................... B-3
B-2 Connect To Dialog Box ................................................................................ B-4
B-3 Com 1, 2 Properties Dialog Box ................................................................. B-4
B-4 HyperTerminal Window ............................................................................. B-5
C-1 User Name and Password Dialog Box ...................................................... C-5
C-2 Web Server Interface — View Window .................................................... C-6
Connectrix DS-32M2 User Guide xiii
Figures
C-3 Web Server Interface — Configure Ports Window ................................. C-7
C-4 Web Server Interface — Configure Switch Identification ...................... C-8
C-5 Web Server Interface — Configure Switch Date/Time ........................ C-10
C-6 Web Server Interface — Configure Switch Operating Parameters ..... C-12
C-7 Web Server Interface — Configure Switch Network ............................ C-14
C-8 Web Server Interface — Configure SNMP ............................................. C-16
C-9 Web Server Interface — Configure Zoning ............................................ C-18
C-10 Web Server Interface — Configure Zone ................................................ C-19
C-11 Web Server Interface — Modify Zone ..................................................... C-20
C-12 Web Server Interface — Configure User Rights .................................... C-21
F-1 Problem Detection and Resolution Process .............................................. F-2
Connectrix DS-32M2 User Guide xv
2-1 LEDs ............................................................................................................... 2-5
2-2 Connectors ..................................................................................................... 2-6
3-1 User Rights for Product Manager Functions .......................................... 3-22
4-1 Operating Status - Alert Panel and Switch Status ................................... 4-5
4-2 Legend for Figure 4-1 ................................................................................... 4-6
4-3 Port States .................................................................................................... 4-35
7-1 Data Default Values ................................................................................... 7-19
A-1 Error Group ................................................................................................ A-11
A-2 Accounting Class 1 .................................................................................... A-12
A-3 Accounting: Class 2 ................................................................................... A-13
A-4 Accounting: Class 3 ................................................................................... A-14
A-5 F_Port Operation Table ............................................................................ A-15
A-6 Operation: F_Port Physical Level ............................................................ A-16
A-7 Operation: Fabric Login ............................................................................ A-17
A-8 Module Table ............................................................................................. A-19
A-9 Configuration Table .................................................................................. A-20
A-10 Capability Group Table ............................................................................ A-21
A-11 System Group ............................................................................................. A-23
A-12 FRU Group ................................................................................................. A-24
A-13 Fibre Channel Port Group ........................................................................ A-25
A-14 Port Binding Group ................................................................................... A-29
A-15 Zoning Group Table .................................................................................. A-29
A-16 Active Zone Table ...................................................................................... A-29
A-17 Active Member Table ................................................................................ A-30
A-18 Threshold Alerts Table ............................................................................. A-30
A-19 Enterprise-Specific Trap Definitions ....................................................... A-32
C-1 Management Support Table ........................................................................ C-3
D-1 CLI Command Tree Navigation Conventions ........................................ D-5
D-2 Command Line Interface Command Tree ............................................... D-6
Tables
Connectrix DS-32M2 User Guide xvii
Preface
As part of its effort to continuously improve and enhance the performance
and capabilities of the Connectrix product line, EMC periodically releases
new versions of hardware and software. Therefore, some functions described
in this guide may not be supported by all versions of Connectrix currently in
use.
If your Connectrix DS-32M2 does not offer a function described in this
guide, please contact your EMC representative for a hardware, software, or
microcode update.
Audience This Guide describes how to operate and manage the Connectrix
DS-32M2 fabric switch. It is intended for data center administrators,
LAN administrators, operations personnel, and customer support
personnel who must monitor and manage product operation.
Organization This publication is organized as follows:
◆Chapter 1, Switch Operating Features, describes switch hardware
components and their operating features. It also describes
management and serviceability features available on the switches
through such network components as the Connectrix service
processor, user workstations, and SNMP management stations.
◆Chapter 2, Operating the Switch, provides procedures for using the
switch operator panel, using hardware LEDs, and switching the
unit power off and on.
◆Chapter 3, Product Manager Overview, provides an introduction
and overview of the DS-32M2 Product Manager. It is intended as
a quick reference for using features available through the main
Product Manager window.
xviii Connectrix DS-32M2 User Guide
Preface
◆Chapter 4, Monitoring and Managing the Switch, describes how to
monitor and manage DS-32M2 operation using the Product
Manager. This includes status indicators, menu options, dialog
boxes, and performance and error data available through the
Hardware View, Port List View, FRU List View, Node List View,
and Performance View.
◆Chapter 5, Configuring the Switch, describes how to use the
options available through the Configure icon pop-up menu on
the Product Manager navigation control panel.
◆Chapter 6, Using Logs, describes the log options that are available
through the Logs icon pop-up menu on the Product Manager
navigation control panel.
◆Chapter 7, Using Maintenance Features, describes how to use the
options available through the Maintenance icon pop-up menu on
the Product Manager navigation control panel.
◆Appendix A, Using SNMP to Manage the Switch, provides details
on SNMP support for the DS-32M2 and provides a list of MIB
and SNMP trap definitions.
◆Appendix B, Configuring Network Addresses, describes the
procedure for configuring unique addresses for each switch.
◆Appendix C, Configuring the Switch from a Web Server, describes
the procedure for configuring the DS-32M2 from the Embedded
Web Server.
◆Appendix E, Specifications, lists the physical characteristics and
operating environment of the DS-32M2.
◆Appendix D, Command Line Interface, describes the commands
that an administrator or operator can enter over a Telnet session,
as an alternative to using the Connectrix Manager or Embedded
Web Server.
◆The Glossary defines terms, abbreviations, and acronyms used in
this manual.
◆An Index also provided.
Connectrix DS-32M2 User Guide xix
Preface
Related
Documentation Related documents include:
◆Connectrix Manager v6.0 User Guide, P/N 069001178
◆Connectrix 2 Gb/s Enterprise Storage Network System Planning
Guide, P/N 069001174
◆Connectrix DS-16M Fibre Channel Switch User Guide,
P/N 069001080
◆Connectrix DS-16M2 Fibre Channel Switch User Guide,
P/N 069001175
◆Connectrix DS-32M Fibre Channel Switch User Guide,
P/N 069001081
◆Connectrix ED-64M Fibre Channel Director User Guide,
P/N 069001096
◆Connectrix ED-64M 2 Gb Fibre Channel Director User Guide,
P/N 069001177
◆Symmetrix Fibre Channel Host Connectivity Guide, P/N 200-999-642
◆CLARiiON Host Connectivity Guide, P/N 014003106
Conventions Used in
this Guide EMC uses the following conventions for notes, cautions, warnings,
and danger notices.
A note presents information that is important, but not hazard-related.
CAUTION
!
A caution contains information essential to avoid data loss or
damage to the system or equipment. The caution may apply to
hardware or software.
WARNING
A warning contains information essential to avoid a hazard that can
cause severe personal injury, death, or substantial property damage
if you ignore the message.
DANGER
A danger notice contains information essential to avoid a hazard
that will cause severe personal injury, death, or substantial property
damage if you ignore the message.
xx Connectrix DS-32M2 User Guide
Preface
Typographical Conventions
This document uses the following type style conventions:
Where to Get Help For technical support, call your local EMC sales office. You can find a
list of office locations at:
http://www.emc.com/contact/
For service, call the appropriate number and ask for Customer
Support:
For additional information on the EMC products and services
available to customers and partners, refer to the EMC Powerlink Web
site at:
http://powerlink.emc.com
Your Comments Your suggestions will help us continue to improve the accuracy,
organization, and overall quality of the user publications. Please send
a message to [email protected] with your opinions of this
guide.
Palatino ◆Normal text
Palatino, bold ◆Dialog box, button, icon, and menu items
◆Selections you make from the user interface,
including buttons, icons, and field names
Palatino, italic ◆New terms or unique word usage
◆Book titles when used in cross references
Courier System prompts and displays; file content
Courier, bold User entry.
Courier, italic Variables in user input or screen/file output.
AVANTGARDE Keystrokes.
United States: (800) 782-4362 (SVC-4EMC)
Canada: (800) 543-4782 (543-4SVC)
Worldwide: (508) 497-7901
/