2. iHealth
  3. Lite Wireless Scale HS4 / HS4S
Lite Wireless Scale HS4 / HS4S

iHealth Lite Wireless Scale HS4 / HS4S User manual

  • Hello, I have reviewed the provided user manual for the Foot Pad HS4 and HS4S. The document outlines the process for installing foot pads to ensure stability and proper inclination on carpet. I can help you with questions about the installation and usage of these foot pads.
  • Can the foot pads be reinstalled after removal?
    What is the maximum carpet thickness for using the foot pads?
    What should be inclination angle after foot pads installation?
Foot Pads For HS4/HS4S
Remove the back cover of release paper from the foot
pads.
1
Clean the four weigh foot to ensure there is no dust or
water.
2
Install the foot pads as shown in the picture.
3
The back cover on the foot pads is a disposable,
after the removal of foot pads can no longer be
installed, because it be out of action is not firm.
Now it is ready to be used on the carpet.
After the product (HS4/HS4S) is installed with the foot
pads, its inclination angle on the ground should be
less than 1 degree.
4
The carpet should be no more than 10mm (0.39 inch)
thick.
10mm
10
/