Chipolino Baby stroller Adora Operating instructions

Chipolino
Brand
Chipolino
Model
Baby stroller Adora
Category
Strollers
Type
Operating instructions
This stroller has been manufactured in accordance with
the Product Safety Directive 2001/95/EU of the European Parliament and The
Council and with European standard EN 1888-1 “Child care articles. Wheeled
child conveyances. Part 1: Baby strollers and carry cot”, EN 1888-2 “Child care
articles. Wheeled child conveyances. Part 2: baby strollers for children from
15 kg to 22 kg” and EN 1466: 2014 “Child care articles. Carry cots and stands.
Safety requirements and test methods” and the regulations of national law,
including Consumer Protection Law.
IMPORTANT! KEEP THIS MANUAL FOR FUTURE REFERENCE
INSTRUCTION MANUAL FOR
BABY STROLLER
“ADORA”
1
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN
THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT!
CAUTION! WARNINGS!
NEVER LEAVE YOUR CHILD UNATTENDED!
THE CARRY COT IS SUITABLE ONLY FOR A CHILD, WHO CANNOT SIT UNAIDED, ROLL OVER
AND CANNOT PUSH ITSELF ON ITS HANDS AND KNEES! MAXIMUM WEIGHT OF THE
CHILD IS 9 KGS!
USE THE POSITION OF THE BACKREST FOR THE SITTING POSITION OF THE CHILD AFTER
6 MONTHS AGE!
KEEP AWAY FROM FIRE!
DO NOT LIFT THE STROLLER BY THE SAFETY BAR!
ALWAYS USE THE RESTRAINT SYSTEM (SAFETY BELTS) ONCE THE CHILD CAN SIT
UNAIDED!
MAKE SURE THAT ALL LOCKING MECHANISMS ARE ENGAGED BEFORE EACH USE!
DO NOT CHANGE BACKREST POSITION, WHEN THE SEAT IS TRANSFORMED INTO
CARRY COT COT MODE!
MAKE SURE YOUR CHILD IS AT SAFE DISTANCE AWAY FROM THE STROLLER DURING AD
JUSTMENTS, FOLDING OR UNFOLDING OF THE STROLLER.
DO NOT ALLOW YOUR CHILDREN TO PLAY WITH THE STROLLER!
BEFORE EACH USE, CHECK THE STABILITY OF FIXING OF SEAT UNIT AND CAR SEAT!
THIS PRODUCT IS NOT SUITABLE FRO RUNNING OR SCATING!
To be used for a child with weight up to 22 kg.
Adult assembly is required!
Do not place additional mattress thicker than 20 mm in the seat!
Always activate the parking device when you put the children in or out of the stroller!
Make sure the safety belts are correctly fastened and adjusted before each use.
The maximum load for the storage basket is 2 kg!
The maximum load for a diaper bag (if one is provided) is 2 kg!
Do not overload the stroller! Every load attached to the handle, bumper, and backrest or on the side
of the stroller will affect its stability!
To be used for one child only at a time. Do not place two or more children in the stroller!
Only use spare parts or other components, which are recommended or supplied by the producer! In
the contrary case the producer is not responsible for the product’s safety.
Donotmakeanychangesormodicationstothestroller'sconstruction!Incaseofproblemscontact
the dealer or an authorized repair service for advice and/or repair.
The car seat does not replace the crib or cot bed for the baby. When the baby needs to sleep, you
must place him in a suitable baby stroller, crib or cot bed.
Donotusethisstrollerifyoundmissingordamagedparts!
Do not allow children younger than 3 years near the stroller during its assembly!
Do not attach any strings or long cords to the stroller in order to avoid risk of suffocation!
Do not use the stroller on stairs or escalators and pay attention when overcoming a curb or a step.
Keep the plastic packaging away from children in order to avoid risk of suffocation!
2
This stroller is intended for infants or babies under 4 years of age or weighing up to 22 kg
(whichevercomesrst);
The seat transforms into a carry cot suitable for newborn baby or baby aged no more than 6 months
andwithweightupto9kg;
Car seat “Adora”, Group 0+ (0-13 kg). It is safe and compatible with Adora stroller’s frame.
Note: Car seat is sold separately. All instructions and recommendations for safety usage and installation
are given in separate user’s manual
Seatunitcanbeinstalledin2directions–forwardfacingandrearwardfacing;
5-pointsafetyharness;
Adjustablebackrest;
Adjustablecanopy;
Swivel and straight motion of front wheels.
1 – Canopy
2 – Handle
3 – Safety bumper
4 – Seat, transformable into carry cot
5 – Belts under leg rest
6 – Transport hook
7 – Parking device
8 – Set rear wheels
9 – Seat position adjustment button
10 – Backrest adjustment mechanism
11 – Storage basket
12 – Button for adjusting wheels movement – swivel and straight
13 – Leg rest
14 – Front wheels
PRODUCT FEATURES
MAIN PARTS DIAGRAM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3
1. Frame
4. Liner
5. Front wheels
6. Set rear wheels
2. Safety bumper
3. Seat/ carry cot
This stroller is supplied partially assembled. In order to complete the assembly, you don’t need any tools.
The assembly, disassembly and functions are numbered from 1 to 18. Use the operations descriptions
given in this manual and their matching picture
IMPORTANT! Follow exactly the instructions given and check the pictures. Keep your hands from
entrapment!
IMPORTANT! After each operation, make sure that you have followed the instructions correctly and
thexingisstable!
IMPORTANT! In most cases after the completion of an operation you will hear a clicking sound.
ASSEMBLY INSTRUCTIONS AND FUNCTIONS
ASSEMBLY
1 – FRAME UNFOLDING
2 – INSTALLATION AND REMOVAL OF FRONT WHEELS
2-1 – Installation
2-2 – Removal
3 – INSTALLATION AND REMOVAL OF REAR WHEELS
3-1 – Installation
3-2 – Removal
Press the two buttons and take the seat of rear wheels.
4 – INSTALLATION AND REMOVAL OF THE SEAT UNIT
4-1 – Installation
4-2 – Removal
4-3 - Seat unit can be installed in 2 directions – forward facing and rearward facing
5 – INSTALLATION AND REMOVAL OF THE BUMPER BAR
4
6 – INSTALLATION AND REMOVAL OF THE CANOPY
6-1 – Insert the plastic ends of canopy on the frame of the stroller
6-2 – Close the zipper
6-3 – Press the button with a screwdriver or other sharp object and move the end to the back
6-4 – Unfasten the zipper
CAUTION! Always attach the canopy to the backrest to prevent the baby to fall and injury!
7 – SWIVEL AND STRAIGHT MOVMENT OF FRONT WHEELS
IMPORTANT!Whenusingthestrolleronunevensurfaces,xthewheelsforstraightmovementonly.
8 – PARKING DEVICE
CAUTION! Always engage the parking device, when the stroller is stationary to avoid the risk of slipping
of the stroller!
9 – CANOPY ADJUSTMENT
Pull the canopy with your hand to open it. Push it with hand to fold the canopy.
10 – LEG REST ADJUSTMENT
Fasten the two belts underneath the leg rest as shown in the picture.
11 – BACKREST ADJUSTMENT
Press the adjusting mechanism and move the backrest up or down. Release the mechanism in order to
xthedesiredposition.
12 – SEAT POSITION ADJUSTMENT
Lift the adjusting button and move the seat to the desired position.
13 - RESTRAINT SYSTEM (SAFETY BELTS)
13-1 – Join the shoulder and waist belts
13-2 – Fasten the safety belt (points 1 and 2 insert in central buckle 3)
13-3 – Press the central buckle button in order to unfasten the safety belt
13-4 – Adjust the belts length using the plastic sliders
Remark: Belt must be snug to child’s body and must not be twisted
The safety belt may be installed on three height levels. Separate the shoulder belt from the central buck-
le, remove the shoulder pad and thread the belt though the loop at desired height.
CAUTION! Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
14 – PLACING THE LINER IN THE SEAT
14-1 – Thread the shoulder belts and the crotch belt in the corresponding openings of the liner.
FUNCTIONS
5
15 – FOLDING THE STROLLER
IMPORTANT! Before folding the stroller, always activate the parking device and empty the storage
basket.
15-1 – Remove the seat unit from the stroller frame.
15-2 – Move the button on the second lock to the left and at the same time press the folding button.
15-3, 15-4 – Press the handle down until the stroller is fully folded and the transport hook is locked.
Note:Thetransporthookofthestrollerisxedautomatically.
16 – TRANSFORMING THE SEAT INTO COT
Unfasten the belts underneath the seat.
CAUTION! WHEN THE SEAT IS IN CARRY COT MODE, IT MUST BE IN REARWARD POSITION –
CHILD FACING THE PARENT.
IMPORTANT! When the seat is transformed in carry cot, always remove the safety belts or tuck them to
the sides of the seat and cover them with a pad/mattress/ with thickness up to 20 mm.
17 – TRANSFORMING THE COT INTO SEAT
Fasten the belts underneath the seat as shown in the picture.
18 – INSTALLATION AND REMOVAL OF CAR SEAT “MILO” ON FRAME OF STROLLER ADORA
ATTENTION! ALWAYS INSTALL THE CAR SEAT IN REARWARD POSITION – CHILD FACING THE
PARENT.
You can install the car seat on the frame of this stroller using adaptors.
Installation: Install the adaptors on the car seat. Place the car seat with adaptors on the adaptors of the
frame and press until you hear a click.
Removal: Pres the removal buttons and take out the car seat form the frame.
release the
transport hook
1-1
1-2 1-3
“click”
6
2-1
3-2 4-1 4-2
4-3
5-1
6-2 6-3
6-4
5-2 6-1
2-2
3-1
“click”
“click”
“click”
“click”
“click”
press
Button
Removal
button
Removal
button
Forward facing Rearward facing
Removal button
press
press
press
“click”
7
7
8
9
10
Straight motion
Engaged
Unfolding
Folding
Released
Swivel motion
8
11
12
1
1
2
3
2
13-1 13-2
1 - press
Position 1 Position 2 Position 3
2
2
1 - press
click click
“click”
9
13-3
14-1
15-1 15-2
15-3
15-4 15-5
14-2
13-4
press
second lock
Folding button
“click”
slider
10
16-1
17
18
16-2
Removal
button
adapter
“click”
Belts
170
о
11
CARE AND MAINTENANCE GUIDELINES
The brakes and wheels wear out faster than other parts. Replace them when necessary.
Regularly oil the moving parts.Use silicone oil or silicone spray for oiling.
Clean and oil all dirty metal and plastic parts regularly.
Clean the fabrics, plastic parts and metal parts with damp cotton cloth or sponge and mild soap.
Do not use aggressive detergents, solvents, bleach or spirits to clean your stroller.
Always leave the stroller to fully dry after cleaning before you use it or store it. Mold could form if you
keep your stroller moist.
Always store your stroller indoors in clean and dry place. Do not expose to direct environment
inuence-sun,rain,moistureandhightemperatureintervals.
Please, contact your authorized dealer for problems connected with the use or repair of this stroller.
Fabric Composition:
Outer: 100% Polyester
Filling: 100% Polyester
Used materials: plastic, textile, metal
KKAD0210xxx
Bulgaria, Plovdiv, str. Golyamokonarskoshosse 1
www.chipolino.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Chipolino Baby stroller Adora Operating instructions

Chipolino
Brand
Chipolino
Model
Baby stroller Adora
Category
Strollers
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents