8
the heating pipe working.
4. Operating process
(1)Earlier electrify: screen show 00:00 and glint,the middle
“:” lighted all the time. Press “H / MIN” till the time you want.
If press “ON/OFF” before setting time, it will keep heating
from 00:00 and the lamp lighted red all the time. (I
you
press “DELAY”、 “SET” first, the clock counts from 00:00, but
doesn’t access heating and presetting state.
(2) Melody the clock: You can press “H” “MIN” to melody the
time straightly at the earlier electrify and waiting state.
While finished, the time displayed and stop glint. .(When on
opera ting or booking state, it’s invalid to melody the clock)
(3)Set presetting time: press “set
, at the same time press
“H
“MIN” till the time you want..
(4)After finishing the setting, loosen “SET
, the screen
change to time show, setting as follows:
a. Press “ON/OFF” to access heating state directly,the lamp
lights red, and the presetting setting is invalid.
b. Press the “DELAY” to enter the presetting state , the lamp
lights blue, and the booking setting is in effect.
c. When loosening “SET
, the presetting time will be affirmed
automatically.
(5)On the presetting st ate, you can press “SET” to look over
the presetting time.
(6)Immediate heating mode:
a. On DELAY state, the first time you press “ON/OFF
,the
presetting mode is canceled and the lamp “SET”