2. Eclipse
  3. ACC-900

Eclipse ACC-900 Quick Manual

  • Hello! I am an AI chatbot trained to assist you with the Eclipse ACC-900 Quick Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
The
master code
factory default
for readers
is
123456
ACC-900 Quick Guide
SET DOOR
SET DOOR
RELAY TIME
RELAY TIME
AFTER PRESSING POUND PRESENT THE CARD / TAG
AFTER PRESSING POUND PRESENT THE CARD / TAG
ADD A SERIES
ADD A SERIES
OF CARDS
OF CARDS
TO USE WITH CARD
TO USE WITH CARD
OR
OR
USER CODE
USER CODE
TO USE WITH CARD
TO USE WITH CARD
AND
AND
USER CODE
USER CODE
Example:
If you want
the option
Auto-relock
disabled you
would chose
0.
The value for
this option
would then be
0 also.
If you would
like to enable
it the you
would chose
1 and the
value would
be 002.
You would
then proceed
to add all the
other values
and come to a
total. This
would be
what you
enter in
section 20.
For
For
Maglocks
Maglocks
& N/C
& N/C
Doorstrikes
Doorstrikes
Maglock Installation
Bolt Lock Installation
Door Strike Installation
Magnetic
Door
Contacts
&
Alarm
Networking Install
Or
Or
CAT5
CAT5
Crossover
Crossover
Cable
Cable
/