1 of 2
ISSUED: 06-09-11 SHEET #: 120-9111-1
PartsList
Description Qty. Part#
A fastenerplate 4 145‐1144
B cable 4 600‐0226
C eyebolt 4 580‐0006
Model: DS-ACC765
Installation and Assembly:
Cable Release Kit
A
B
NOTE: Read entire instruction sheet before you start installation and assembly.
Before you start make sure all parts listed are included with your product.
1
1. Run cable (B) through hole
in pull-out mount assembly and
fastener plate (A) as shown.
2. Run cable (B) through hole
in release mechanism and up
through second row of holes in
fastener plate (A) as shown.
3. For easy accessibility:
Tape or secure loop end of
cable onto top of display or
wall.
REPEAT STEPS WITH
OPPOSITE SIDE OF VIDEO
WALL MOUNT.
21
HOLE
A
A
B
B
C
2 of 2
ISSUED: 06-09-11 SHEET #: 120-9111-1
LOOP
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Position DS-ACC765 cables in locations as shown.
Additional Cable Release Kits may be required if more than three displays are mounted horizontally.
2
2
C
Optional Eyebolt
If display is placed in recess and cable cannot be pull straight up, use eyebolt (C) in corner.
Run loop end of cable (B) though eyebolt (C) as shown.
PULL DIRECTION
/
