Philips 26PFL5522D User manual

Country Number Tariff

Austria 0810 000205 €0.07/min

Belgium 078250145 €0.06/min

Czech Rep 800142840 free

Denmark 3525 8759 local

Finland 09 2311 3415 local

France 0821 611655 €0.09/min

Germany 01803 386 852 €0.09/min

Greece 0 0800 3122 1280 free

Hungary 0680018189 free

Ireland 01 601 1777 local

Italy 840320086 €0.08/min

Luxemburg 40 6661 5644 local

Netherlands 0900 8407 €0.10/min

Norway 2270 8111 local

Poland 0223491504 local

Portugal 2 1359 1442 local

Slovakia 0800004537 free

Spain 902 888 784 €0.10/min

Sweden 08 5792 9100 local

Switzerland 0844 800 544 local

UK 0870 900 9070 local

This information is correct at the time of press.

For updated information, see www.support.philips.com

www.philips.com/support

Model

Serial

Product information

• The model and serial number can be found

at the rear of the TV and on the

packaging. For a larger TV, information

is also on left hand underside of the

TV.

• Standby Power Consumption for this set

is less than 1 W.

• Power Consumption of the set can found

on the type plate at the rear of the TV.

• For more speciﬁ cations of the product

see the product leaﬂ et on www.philips.

com/support.

Note

Specifications and information are

subject to change without notice.

• If you need further assistance, please call

the customer support service in your

country. The corresponding telephone

numbers and addresses are given in the

supplied Worldwide guarantee booklet.

Important

• AC3 (an audio format) is not supported

for this set. Use the

key on the

remote control to select an alternative

audio.

• Some TV antennas require power from

the TV set. This set does not support such

a feature.

Recycling

The packaging of this product is intended to

be recycled. Apply to the local authorities for

correct disposal.

Disposal of your old product

Your product is designed and manufactured

with highly quality material and components,

which can be recycled and reused. When this

crossed-out wheeled bin symbol is attached

to a product, it means the product is covered

by the European Directive 2002/96/EC.

Please inform yourself about the local

separate collection system for electrical and

electronic products. Please act according to

your local rules and do not dispose your old

products with your normal household waste.

The correct disposal of your old product will

help prevent potential negative consequences

for the environment and human health.

Disposal of batteries

The batteries supplied do not contain the

heavy metals mercury and cadmium. Please

check on how to dispose exhausted

batteries according to local regulations.

Rear of TV

Left hand

underside

of TV

1

English

Table of contents

1 Introduction............................... 3

1.1 Important Information....................... 3

1.1.1 Stationsary images on the TV screen

................................................................. 3

1.1.2 Electric, Magnetic and

Electromagnectic Fields (“EMF”)..... 3

1.2 What is digital TV?.............................. 4

1.3 Digital or Analogue channels?.......... 4

2 Safety.......................................... 5

2.1 General.................................................. 5

2.2 Care of the screen.............................. 5

3 Overview of the television keys

and connectors.......................... 6

3.1 Side or top controls........................... 6

3.2 Rear connectors.................................. 6

3.3 Side connectors.................................. 6

4 Getting started..........................7

4.1 Before you start................................... 7

4.2 Connect the antenna.......................... 7

4.3 Connecting and disconnecting the

mains.......................................................7

4.4 Switching on the TV............................7

4.5 Using the remote control. ................7

5 Remote control functions.........8

6 Overview of Digital main menu

and sub-menus...........................10

7 Switching on the TV for the

ﬁ rst time.................................... 13

8 Understanding the information

on the banner............................ 14

8.1 Banner description.............................. 14

8.2 Symbols description............................ 14

9 Services lists

9.1 Rearrange services.............................. 15

9.2 View new TV channels or Listen

to new Radio stationss........................

15

10 Service setup............................. 16

10.1 Add new services................................ 16

10.2 Reinstall all services............................ 16

10.3 Manual install services........................ 17

11 Test reception........................... 18

12 Preferences................................ 19

13 Access restrictions.....................20

14

Setting up your favourites list....21

15 Information................................ 22

16 Using the Options menu...........23

17 TV Guide ...................................24

18 Digital teletext (MHEG)........... 25

19 Using the Conditional Access

Module (CAM)...........................26

20 Automatic tuning of analogue

programmes.............................. 27

21 Manual tuning of analogue

programmes.............................. 28

22 Programme sort........................29

23 Naming of channel.....................30

24 Selecting your favourite

programme ............................... 31

2

English

25 Features

25.1 Timer...................................................... 32

25.2 Parental control................................... 33

25.3 Child lock.............................................. 34

25.4 Active control...................................... 34

26 Picture and Sound settings...... 35

27 Smart Picture and Sound......... 36

28 Picture formats......................... 37

29 Teletext......................................38

30 Using the TV as PC monitor

30.1 Connecting the PC.............................. 40

30.2 Control TV settings while a PC is

connected ............................................ 40

31 Using the TV in HD (High

Deﬁ nition) mode

31.1 Connecting the HD equipment........ 41

31.2 Control TV settings while in HD

mode...................................................... 41

31.3 Mode Selection function in Features

menu....................................................... 42

31.4 Display (native 1080) in Features

menu.......................................................42

31.5 Supported input formats................... 43

32 Connecting other equipment

32.1 Connect VCR and DVD recorder...44

32.2 Connect Decoder and VCR..............44

32.3 Connect 2 VCRs or VCR and DVD....

recorder.................................................45

32.4 Connect a satellite receiver.............. 45

32.5 Connect a DVD player, Cable box or

Game console...................................... 46

32.6 Connect a DVD player, a Satellite

receiver or Cable box ....................... 46

32.7 Connect a PC....................................... 47

32.8 Connect a Camera, Camcorder or

Game console...................................... 48

32.9 Connect a Headphone....................... 48

33 Troubleshooting........................49

34 Glossary..................................... 51

3

English

1 Introduction

Thank you for purchasing this television set.

This manual contains all information you will

need to initially install and operate your new

TV.

If this instruction manual does not

give an answer to your problem or

if the troubleshooting page does not solve

your TV problem, you can call your Local

Philips Customer or Service Centre. See the

supplied Worldwide guarantee booklet for

details. Please have the Model and Product

number (which you can find at the back or

the bottom of your television set or on the

packaging) ready, before calling the Philips

customer support service.

1.1 Important information

1.1.1 Stationsary images on the TV

screen

A characteristic of LCD and Plasma Panels

is that displaying the same image for a long

time can cause a permanent after-image to

remain on the screen. This is called

phosphor burn in. Normal use of the TV

should involve the showing of pictures

that contain constantly moving and changing

images that fill the screen.

Examples of stationsary images (this is not

an all inclusive list, you may encounter

others in your viewing).

• TV and DVD menus: listings of DVD

disk content.

• Black bars: when black bars appear at

the left and right side of the screen, it is

recommended to change to a picture

format so that the picture fills the entire

screen;

• TV channel logo: present a problem if

they are bright and stationsary. Moving

or low-contrast graphics are less likely

to cause uneven aging of the screen;

• Stock market stickers: presented at the

bottom of the TV screen;

• Shopping channel logos and pricing

displays: bright and shown constantly or

repeatedly in the same location on the

TV screen.

• Examples of still pictures also include

logos, computer images, time display,

teletext and images displayed in 4:3

mode, static images or characters, etc.

Tip:

Reduce contrast and brightness when

viewing.

1.1.2 Electric, Magnetic and

Electromagnetic Fields (“EMF”)

• Royal Philips manufactures and sells many

products targeted at consumers, which,

like any electronic apparatus, in general

have the ability to emit and receive

electromagnetic signals.

• One of Philips’ leading Business

Principles is to take all necessary health

and safety measures for our products, to

comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

• Philips is committed to develop, produce

and market products that cause no

adverse health effects.

• Philips confirms that if its products are

handled properly for their intended use,

they are safe to use according to scientific

evidence available today.

• Philips plays an active role in the

development of international EMF and

safety standards, enabling Philips to

anticipate further developments in

standardisation for early integration in its

products.

4

English

1.2 What is digital TV?

Digital Television offers a far wider choice

of TV viewing, free from the interference

that you may experience on analogue TV.

It promises to transform television viewing

into a new whole experience. There is a

greater selection of widescreen programmes.

Many of your favourite programmes are

in widescreen on the digital channels

- something the analogue TV cannot do

properly.

There is new whole experience of

interactivity on digital TV. By using your

remote control, you can access all kinds

of information like the digital text which

is much clearer than the old teletext

system. It gives you the added enjoyment of

related information running alongside the

programme you are watching. You can also

access an Electronic Programme Guide that

provides you with a quick and easy way to

view a complete list of digital programmes as

you would in a newspaper or TV magazine.

1.3 Digital or Analogue channels?

When the television is powered on for the

first time, it will always be in Digital mode.

Use the

key of the remote control to

switch the TV between analogue and digital

mode. Use the P + / – or to

keys to select channels.

Note

• Chapters 6 to 19 contain all the

information you need to operate your

TV in the Digital mode. Chapters 20

to 29 contain all the information and

instructions you need to operate your

TV in the Analogue mode.

5

English

2 Safety

2.1 General

1

Two people are required to lift and

Carry a TV that weighs more than 25 kg.

Improper handling of the TV can cause

Serious injury.

2

If you place the TV set on a surface,

Ensure the surface is level and that it can

The weight of the TV.

3

If you wish to hang your TV on a wall, do

Not hang the TV yourself. Your TV must

Be hung by qualified technician. Improper

hanging can cause the TV to be unsafe.

4

Before you hang your TV on a wall,

ensure the wall is suitable to carry the

weight of the TV.

5

The connections do not have to be made

before you hang the TV, but the cables

must be inserted into the TV.

6

Wherever you place or hang the TV,

ensure that air can circulate freely

through the ventilation slots. Do not

position the TV in a confined space.

7

Do not place naked flame sources such

as lighted candles close to the TV set.

8

Do not place a vase filled with water

near the TV. Spilling water into the TV

can result in electric shock. Do not

operate the TV if water is spilled into

the set. Unplug the power cord from

the mains immediately and have the set

checked by a qualified technician.

9

Do not expose the TV or the batteries

of the remote control to heat, direct

sunlight, rain or water.

10

Do not touch any part of the TV,

power lead, or aerial lead during

lightning storms.

11

Do not leave the TV in standby mode

for an extended period of time. Instead,

disconnect the TV from the mains.

12

Pull the power lead by the plug - do

not pull on the power lead. Do not use

a poor fitting mains socket. Insert the

plug fully into the mains. If it is loose, it

may cause arcing and result in fire.

13

Do not connect too much equipment

to the same mains socket. Excess

equipment can cause overloading and

result in fire or electric shock.

2.2 Care of the screen

1

Do not remove the protective sheet

until you have completed the stand/

wallmounting and connections. Please

handle with care.

Note

Use only the soft cloth provided

to clean the glossy front of the TV.

2

Do not use a cloth that is dripping

with water. Do not use acetone,

toluene or alcohol to clean the TV. As a

safety precaution, unplug the power

cord from the mains when you clean

the set.

3

Do not touch, push, rub or strike the

screen with anything hard as this may

scratch or damage the screen

permanently.

X

6

English

3 Overview of television

keys and connectors

The following connectors are located on the

rear of the TV.

1

CI (Common Interface) slot: to

connect a CAM (Conditional Access

Module) and a smart card.

2

TV Aerial socket :

Insert the aerial

plug into the 75 Ω : socket.

3

HDMI 1 / HDMI 2: to connect to

set-top box, DVD player/recorder, High

Definition equipment or Personal

Computer.

4

EXT4

: to connect to equipment like

DVD, Decoder which have the same

sockets.

5

EXT 1 (RGB) and

6

EXT 2 (CVBS/

S-VIDEO): connect to equipment

like DVD

player/recorder, VCR, Decoder which

have similar connections (so called ‘scart

connections’).

3.3 Side connectors

These connectors are located on the side of the

TV.

1

Headphone : Connect the phono-

jack to the headphone connector of the

TV.

2

Audio Video

: to connect to the camera

or camcorder.

3.1 Side or top controls

Use the side or top keys to control power, menu,

volume and programme number.

1

POWER

.

:

to switch the TV on and

off.

Note:

For zero power, remove

the mains cord from the mains socket.

2

PROGRAM + / – : to select

programmes.

3

MENU

: to display or close menus.

The PROGRAM + / – keys can be used

to select a menu item and the VOLUME

+ / – keys can be used to enter into

the selected menu item and make

adjustments.

4

VOLUME + / –:

make the volume

louder or quieter.

3.2 Rear connectors

The rear connectors are located on the rear of

the TV and face downward.

6

EXT 2

(CVBS /S-VIDEO)

5

EXT 1

(RGB)

43

21

POWER

PROGRAM

MENU

VOLUME

4

1 32

2

1

EXT 3

7

English

4 Getting started

Verify that the mains supply voltage in your

home corresponds to the voltage printed on

the sticker at the rear of the TV.

Warning: If the TV is mounted on a

swivel base or swivel arm, ensure no strain

is placed on the power cord when the TV

is swivelled. Strain on the power cord can

loosen connections. This may cause arcing

and result in fire.

4.4 Switching on the TV

• To switch on the TV, press the POWER

key on the side or top controls. A blue/

green indicator comes on and after a few

seconds the screen lights up.

• If the TV set remains in standby mode

(red

indicator), press the PROGRAM + / –

key on the side or top controls or the

P + / - key on the remote control.

4.5 Using the Remote Control

Insert the 2 batteries supplied. Be sure the

(+) and (-) ends of the batteries line up

correctly (inside of case is marked.)

4.1 Before you start

Warning: The connections do not

have to be made before hanging but the

cables must be inserted into connectors

of the TV.

4.2 Connect the antenna

Insert the aerial plug ﬁ rmly into the 75 Ω :

aerial socket at the bottom of the TV and in

the wall antenna socket.

4.3 Connecting and Disconnecting the

mains

(Plasma TV) - CAUTION : This a Class 1

apparatus. It must be connected to a MAINS

socket out with a protective earthing connection

.

The appliance coupler of the mains cord on

the TV is used as the disconnect device

Ensure the power cord is fully inserted into

the TV mains socket and the wall socket.

To disconnect from the mains, remove the

mains cord from the mains socket at the

back of the TV or remove the plug from the

wall socket.

Connectors at rear of TV

(facing downward)

POWER

PROGRAM

MENU

VOLUME

8

English

5 Remote control

functions

2

Sound mode

Used to force programmes in Stereo

and Nicam Stereo to Mono. For

bilingual programmes, select Dual å or

Dual » (as indicated on the screen

during such broadcasts).

The Mono

indication

shows up in red when in forced

position.

In digital mode, å-» displays the list

of audio languages.

3

Subtitles mode

In digital mode, this key activates or

deactivates the subtitle mode.

4

MENU

To call up or exit the TV analogue menus.

5

Cursors Up/Down/Left/Right

( )

These 4 keys are used for selection and

adjustment of menu items.

6

Analogue or Digital mode

To switch between the television analogue

and digital mode.

7

Picture Format

(See page 37).

8

AV

To display Source List to select TV

(Analogue), Digital TV or connected

peripheral equipment (EXT 1, EXT 2,

EXT 3, EXT 4, HD

MI 1 or HDMI 2). Use

the Î ï keys to select source and the

Æ /

key to confirm selection.

9

Options

(See page 23)

10

Cancel

In digital mode, this key functions as an

exit key for MHEG teletext if there are

no colour key links that are available to

exit teletext mode.

1

Standby

To set the TV to standby mode. To

switch the TV on again, press the

key once more or press the

to

, P + / – or key.

Note: when the TV is switched on,

the

last viewed mode is displayed.

10

5

2

1

3

4

7

8

6

9

English

15

Mute

Turn off or on sound.

16

/ Numerical keys /

For direct access to programmes.

For a two digit programme number, the

2

nd

digit must be entered shortly after

the first digit before the dash

disappears.

17

Screen information

In digital mode, display/exit the

information banner (see page 14).

In analogue mode, display/remove the

programme number, the sound mode,

the clock and the remaining time of

the sleep timer.

18

Active Control

Automatically adjusts the picture setting

for optimal picture quality continuously

under any signal conditions.

(See page

34).

19

Digital TV / Radio

In digital mode, this key is used to access

digital radio stationss. Press the

key

to access radio list. Note : To return

to digital video mode, press the

key again.

20

TV Guide

(see page 24)

21

Programme ( + P – )

Selects next or previous available

channel/source (or page in digital menu).

22

Alternate channel / Edit or back

space

In Analogue/Digital mode, it allows you

to alternate the previously viewed

programme and the current programme.

It is also used as an edit or back space

key when you are naming your favourite

channel.

23

Smart Picture /Sound

Accesses a series of predefined picture

and sound settings (see page 36).

11

Teletext

(See page 38-39).

12

Digital menu

To display / exit from the digital menu

(when TV is in digital mode).

13

OK

Confirms selection and accesses the

program list in Digital mode.

14

Volume ( + VOL – )

To turn on sound louder or quieter.

16

14

18

17

11

22

23

21

20

15

13

12

19

10

English

6 Overview of Digital

main menu and

sub-menus

1

Use the key of the remote

control to select Digital mode.

2

From the digital mode, press the

key to display the setup menu.

3

Use the Î ï Í Æ k

eys to navigate,

select and adjust menu items.

Setup

Favourites

List 1

List 2

List 3

List 4

Name

Select TV channels.

Select Radio stationss.

Add all services

Remove all services

Name

Select TV channels.

Select Radio stationss.

Add all services

Remove all services

Name

Select TV channels.

Select Radio stationss.

Add all services

Remove all services

Name

Select TV channels.

Select Radio stationss.

Add all services

Remove all services

11

English

Setup

Preferences

Language

Audio

Subtitle/Teletext

Subtitling Mode

Subtitles for hearing impaired

System

Location

Country

Time zone

Information

System software

Current software version

Always accept new software

Access restrictions

Set pin code protection

Maturity rating

TV channels

Radio stationss

Change pin code

Basque, Catalan, Croatian, Czech, Danish, Dutch,

English, Finnish, French, Gaelic, Gallegan, German,

Greek, Hungarian, Italian, Norwegian, Polish,

Portuguese, Russian, Serb, Slovak, Spanish,

Swedish, Turkish, Welsh

On, Off, Auto

Yes, No

Cesky, Dansk, Deutsch, English, Español,

Français, Italiano, Magyar, Nederlands,

Norsk, Polski, Português, Suomi, Svenska

Australia, Austria, Belgium, Czech, Denmark,

Finland, France, Germany, Greece, Hungary,

Italy, Netherlands, Norway,

Poland, Portugal,

Spain, Sweden, Switzerland, United Kingdom

Yes, No

On, Off

12

English

Setup

Installation

Service lists

Service setup

Test reception

Rearrange services

View new TV channels.

Listen to new Radio Stationss.

Add new services

Search

TV channels found.

Radio stationss found.

Other services found.

Store

Discard

Reinstall all services

Search

TV channels found.

Radio stationss found.

Other services found.

Store

Discard

Manual install service

Frequency

Network name

Signal quality

Signal strength

Store

Discard

Frequency

Network name

Signal quality

Signal strength

13

English

7 Switching on the TV

for the first time

When you switch on the TV set for the first

time, a menu will appear on screen.

1

Press the Æ key to enter into

Language mode and press the Î ï

keys to select your preferred language.

2

Press the key to confirm

selection.

3

Press the Î ï keys to select Country

or Time Zone and press the Æ key to

enter into Country or Time Zone

mode.

Caution

If you select a wrong country, the channel

numbering will not be according to the

standard for your country and you may not

receive all services or nothing at all.

Note

The Language can be selected independently

from the Country.

4

Press the Î ï keys to select your

preferred Country or Time Zone and

the

key to confirm your selection.

5

Press the ï key to select Service

Scan to scan the available analogue and

digital channels.

6

Pr

ess the key to start the

installation.

Note

If no digital channels are detected, press

key to switch to analogue mode.

Note

If at some point of time you decide to reset

to the factory default settings, press and hold

down the MENU key on the side of the

TV set for 5 seconds. A menu will appear on

the screen. Repeat steps 1 - 5 as if this was

the first time you have turned on the TV.

This activity will reset both the Digital and

Analogue mode to factory default settings.

English

Español

Français

Italiano

Magyar

Language

Country

Time Zone

Service Scan

Setup

11:28

Select your preferred language

14

English

8 Understanding the

information on

the banner

When you select a digital programme, an

information banner is displayed for a few

seconds at the top of the screen.

8.1 Banner description

The banner contains information on the

preset number, channel name, programme

duration, transmission clock, programme title

and the time remaining of the current

programme.

8.2 Symbols description

i More information about this

programme is available : press the

key once to display and a second

time to remove it.

Subtitling is available : if you want to

display them, press the key or

the key to access the options

menu and select subtitles.

TXT

Indicates Analogue Teletext is available

in Digital mode.

ù Other languages are available and

can be selected in the options menu.

You can also select other languages by

pressing the key.

u The colour of the symbol (red, green,

yellow or blue) indicates the selected

Favourites list.

Note

A white symbol u will appear if the

programme is stored in one or more

of the favourites lists which are currently

not activated.

symbols

programme

start and

end time

preset

number

TXT

2 11:00-11:45 10:38

BBC 2 Snooker Minutes left : 22

clock

channel name programme title remaining time

of programme

15

English

9 Service lists

9.1 Rearrange services

This menu allows you to change the orderof

the stored digital channels and radio

stationss.

1

Fr

om the digital mode, press the

key to display the setup menu.

2

Use the ï k

ey to select Installation

and press Æ twice to select the Service

lists menu.

3

Use

the Î ï keys to select Rearrange

services and press Æ key.

4

Use

the Î ï keys to select the channel

you want to exchange.

5

Pr

ess key to activate.

If you want to uninstall the selected

channel, press the red key.

6

Select the ne

w channel number by using

the Î ï.

7

Pr

ess key to confirm. The exchange

is done.

8

Repeat the operations

4

to

7

until

all the channels are in the required

order.

9

T

o return to previous menu, press the

Í key.

10

Press the

key to exit the menu.

9.2 View new TV channels or Listen

to new Radio stationss

This menu allows you to check the

availability of new TV channels or new radio

stationss that have been launched by the

broadcaster after the initial installation.

1

From the digital mode, press the

key to display the setup menu.

2

Use

the ï key to select Installation

and press Æ twice to select the Service

lists menu.

3

Use the Î ï k

eys to select View new

TV channels or Listen to new Radio

stations.

4

If new services are available, press Æ to

enter into the list and use the Î ï keys

to move through the list.

5

T

o return to previous menu, press the Í

key.

6

Press the key to exit the menu.

Rearrange services

View new TV channels

Listen to new Radio stations

Service lists

Service setup

Test reception

Setup

11:28

Manage service lists

Installation

Close

Rearrange services

View new TV channels

Listen to new Radio stations

Setup

11:28

Change preset location of services

Installation

Close

1 _

2 _

3 _

4 _

5 _

6 _

7 _

8 _

9 _

16

English

10 Service setup

10.1 Add new services

This menu allows you to search for new TV

channels or radio stationss that have been

launched

by the broadcaster after the initial

installation.

1

Fr

om the digital mode, press the

key to display the setup menu.

2

Use the ï key to select installation and

press Æ key.

3

Select Service setup (ï) and press Æ

key.

4

Pr

ess Æ to add new services and press

key to activate the installation.

The search begins and only new

channels will be stored and added to

the channel list menu. The percentage of

the installation that has been completed

and the number of channels found is

displayed. When the search is completed,

press the

key to accept the new

services.

5

T

o return to previous menu, press the

Í key.

6

Pr

ess the key to exit the menu.

10.2 Reinstall all services

This menu allows you to reinstall all the

digital TV channels and radio stationss.

1

Fr

om the digital mode, press the

key to display the setup menu.

2

Use the ï key to select installation and

press Æ key.

3

Select Service setup (ï) and pr

ess Æ

key.

4

Select Reinstall all services (ï) and

pr

ess Æ key.

Add new services

Reinstall all services

Setup

11:28

Reinstall will remove all service settings

Installation Service setup

Close

Search

TV channels found

Radio stations found

Other services found

Store

Discard

Manual Install services

Add new services

Reinstall all services

Service lists

Service setup

Test reception

Setup

11:28

Install and manage services

Installation

Close

Manual install services

Add new services

Reinstall all services

Setup

11:28

Scan for new services

Installation Service setup

Close

Search

TV channels found

Radio stations found

Other services found

Store

Discard

Manual Install services

Page is loading ...

Philips 26PFL5522D User manual

Philips 26PFL5522D User manual

Related papers

Other documents