Wacker Neuson G 2.1A User manual

Hydronic Air Heater

Pureheat

OPERATOR’S MANUAL

0171942en 001

0907

0171942EN

One Year Limited Warranty

(see your distributor to file warranty claim)

Ground Heaters, Inc. warrants that the Products described in this Limited Warranty shall be free of

defects in material and workmanship under normal use and service for a period of one year from

the Ground Heaters, Inc. invoice date to Distributor or for a period of one year from Distributor’s

invoice date to end-user, excluding pre-season orders which will have an effective warranty date of

November 15th. This Limited Warranty is expressly limited to crediting the purchase price of the

defective Product or to repairing or replacing the defective Product, at the sole option of Ground

Heaters, Inc. This warranty shall not extend to any repair work performed by anyone other than

Ground Heaters, Inc. or an authorized representative of Ground Heaters, Inc. Such credit, repair

or replacement shall be Ground Heaters, Inc.’s sole obligation and buyer’s exclusive remedy

hereunder and shall be conditioned upon Ground Heaters, Inc.’s timely receipt of warranty claim of

the alleged defect and, at Ground Heaters, Inc.’s option, return of such product to Ground Heaters,

Inc., FOB its Spring Lake, Michigan, facility. Any warranty claims received after 13 months from

warranty effective date are not valid. This exclusive remedy shall not be deemed to have failed of

its essential purpose provided Ground Heaters, Inc. is willing and able to repair or replace the

defective Product or to credit the purchase price within 90 days of the date on which Ground

Heaters, Inc. confirms that such products are defective. Use of repair or replacement parts not

manufactured by Ground Heaters, Inc. may void this warranty. Ground Heaters, Inc.’s liability

hereunder shall be limited to the contract price of that portion of the Product on which such liability

is based. The existence of a defect shall be determined by Ground Heaters, Inc. in its sole

discretion.

GROUND HEATERS, INC. SHALL NOT BE RESPONSIBLE FOR ANY LABOR CHARGES OR

LOST HEAT TRANSFER FLUID IN CONNECTION WITH WARRANTY SERVICE. USE OF ANY

ANTI-FREEZE OR HEAT TRANSFER FLUID OTHER THAN GROUND HEATERS BRAND HEAT

TRANSFER FLUID VOIDS THIS WARRANTY IN ITS ENTIRETY.

THIS WARRANTY IS EXCLUSIVE. WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE, AND WARRANTIES ARISING FROM A COURSE OF DEALING OR

USAGE OF TRADE, ARE SPECIFICALLY EXCLUDED, AND THERE ARE NO WARRANTIES

EXPRESSED OR IMPLIED OTHER THAN THE LIMITED WARRANTY EXPRESSLY SET FORTH

HEREIN.

GROUND HEATERS, INC. SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,

SPECIAL OR OTHER DAMAGES, INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS

OF PROFITS OR PRODUCTION, OR INJURY TO PERSON OR PROPERTY. WITHOUT

LIMITING THE GENERALITY OF THE FOREGOING, GROUND HEATERS, INC. SHALL NOT BE

LIABLE FOR ANY CLAIMS BASED ON THE CONDITION, USE OR OPERATION OF THE

PRODUCTS, WHETHER BASED ON CONTRACT, TORT OR OTHER THEORIES OF LAW,

INCLUDING WITHOUT LIMITATIONS, THEORIES OF NEGLIGENCE.

The “Products” covered by this Limited Warranty include all machines manufactured by Ground

Heaters, Inc. and sold in the ordinary course of business, and all accessories therefore, which are

registered with Ground Heaters, Inc., except

for the following components: Heat Transfer Hoses,

Tires, Generator Powerheads and Engines. These are considered to be wear items and/or are

covered by warranties of the component manufacturer. NOTE: Failure to maintain proper inflation

or operating tires at speeds or under loads in excess of those recommended in the operator’s

manual may void the tire manufacturer’s warranty. Failure to fully pay for Product will void this

Limited Warranty.

No agent or employee of Ground Heaters, Inc. is authorized to modify, extend, or otherwise

change this limited warranty.

Rev. 11-22-04 - kk

This Pureheat

™

Hydronic Air Heater manual contains the

following:

1. Pureheat™ Hydronic Air Heater Operator’s Manual

2. One Year Limited Warranty

3. Pump Manufacturer’s Manual

4. Burner Manufacturer's Manual

Technical Assistance

877-799-9600

The licensed gas technician must use a manometer (to

properly adjust gas pressure) and an electronic combustion

analyzer (to properly adjust burner air intake and verify that

proper combustion parameters have been achieved). The

licensed gas technician must supply all fuel lines, fittings,

regulators, etc. necessary to connect the Pureheat

TM

NG/LP

burner to the fuel source at the correct pressure and flow.

FAILURE TO HEED THIS WARNING MAY RESULT IN

AN EXPLOSION AND/OR FIRE CAUSING

PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

WARNING

LICENSED GAS TECHNICIAN REQUIRED.

NG/LP BURNER SETUP AND INSTALLATION, FUEL

SUPPLY CONNECTION, TEST FIRING AND BURNER

ADJUSTMENT MUST

BE PERFORMED BY A LICENSED

PROFESSIONAL GAS TECHNICIAN AND MUST CONFORM

TO THE REQUIREMENTS OF ALL RELEVANT LOCAL,

STATE, PROVINCIAL AND FEDERAL AUTHORITIES.

Burner setup and installation, fuel supply connection, test-

firing and burner adjustment must be performed by a

licensed

professional and must conform to the

requirements of local, state and federal authorities. In the

Commonwealth of Massachusetts, gas piping shall be

installed by a licensed plumber or gas fitter.

Operator Manual available in French language upon request. Call 877-799-9600.

Manuel de renseignements disponible en langue francaise sur demande.

Appellez le 877-799-9600.

• Do not store or use gasoline or other

flammable vapors and liquids in the vicinity of

this or any other appliance.

• WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance

- Do not touch any electrical switch; do not

use any phone in your building

- Immediately call your gas supplier from a

neighbor's phone. Follow the gas

supplier's instructions.

- If you cannot reach your gas supplier, call

the fire department

• Installation and service must be performed by

a qualified installer, service agency, or the gas

supplier.

WARNING: If the instructions in this

manual are not followed exactly, a fire or

explosion may result causing property

damage, personal injury or loss of life.

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL

TABLE OF CONTENTS

Page

Technical, Checklists, Warranty Information .................................................................... i

Warnings ..................................................................................................................................... ii, iii

Specifications ............................................................................................................................ ix

List of Abbreviations................................................................................................................ x

INTRODUCTION

1.1 EXTERNAL FEATURES ................................................................................................... 1-2

1.2 INTERNAL COMPONENTS .............................................................................................. 1-3

1.2.1 Heater with Burner Options ......................................................................................... 1-3

1.2.2 Heater with Burner Detail ............................................................................................ 1-4

1.2.3 Inside Rear Doors........................................................................................................ 1-5

1.3 IDENTIFICATION .............................................................................................................. 1-6

1.4 SAFETY FEATURES......................................................................................................... 1-6

1.5 SAFETY PRECAUTIONS.................................................................................................. 1-6

1.5.1 Burner Setup, Installation and Adjustment Requirements .......................................... 1-7

1.5.2 Operators..................................................................................................................... 1-7

1.5.3 Safe Operation and Maintenance................................................................................ 1-7

1.6 REPAIR PARTS AND ACCESSORIES ............................................................................ 1-8

1.7 MAINTENANCE................................................................................................................. 1-8

1.8 OBTAINING WARRANTY SERVICE ................................................................................ 1-8

START UP, OPERATION AND SHUTDOWN

2.1 CIRCULATION SYSTEM ADVISORY............................................................................... 2-1

2.1.1 Standard Configuration Performance.......................................................................... 2-1

2.1.1.1 HX200 Heat Xchangers™ ................................................................................... 2-1

2.1.1.2 HX200 Heat Xchangers™ with Optional Booster Pump ..................................... 2-1

2.1.1.3 HX100 Heat Xchangers™ ................................................................................... 2-1

2.1.1.4 HX100 Heat Xchangers™ with Booster Pump.................................................... 2-1

2.1.1.5 HX50 Heat Xchangers™ ..................................................................................... 2-2

2.1.1.6 HX50 Heat Xchangers™ with Booster Pump...................................................... 2-2

2.1.1.7 Maximum Heat Xchanger™ Connection Capability ............................................ 2-2

2.1.2 Optional Booster Pump ............................................................................................... 2-2

2.1.3 Circulation Hose Limitations ........................................................................................ 2-2

2.1.4 Insulate Circulation Hoses........................................................................................... 2-3

2.1.5 Circulation Hose Protection ......................................................................................... 2-3

2.2 PRE-START UP CHECKS ................................................................................................ 2-3

2.2.1 Positioning ................................................................................................................... 2-3

2.2.2 Unloading HX200 Heat Xchangers™.......................................................................... 2-3

2.2.3 Unloading HX100 Heat Xchangers™.......................................................................... 2-4

2.2.4 Unloading HX50 Heat Xchangers™............................................................................ 2-4

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’SMANUAL

TABLE OF CONTENTS (continued)

Page

2.2.5 Heat Transfer Fluid (HTF)............................................................................................ 2-4

2.2.6 Switch Positions........................................................................................................... 2-4

2.2.7 Deployment of Circulation Hoses or Option Heat Transfer Hose................................ 2-5

2.3 SETUP ............................................................................................................................. 2-5

2.4 START UP ......................................................................................................................... 2-5

2.4.1 Integrity Check............................................................................................................. 2-5

2.4.2 Warming the Heat Transfer Fluid ................................................................................ 2-6

2.4.3 Initiating Flow through Heat Transfer Hose ................................................................. 2-6

2.5 OPERATING WITH OPTIONAL ACCESSORIES............................................................. 2-7

2.5.1 Using Three HHS3004 with Booster Pump for Thawing Applications......................... 2-7

2.5.2 Using Five HHS3004 with Booster Pump for Curing and Frost Prevention Applications 2-7

2.6 MONITORING OPERATING PARAMETERS ................................................................... 2-8

2.7 UNIT SHUTDOWN............................................................................................................. 2-9

2.7.1 Burner Shutdown ......................................................................................................... 2-9

2.7.2 Disconnecting Hoses from Heat Xchangers™ and Pureheat ..................................... 2-9

2.7.3 Rewinding the Circulation Hose .................................................................................. 2-9

2.7.4 Completing Unit Shutdown .......................................................................................... 2-10

2.8 CONNECTING/DISCONNECTING OPTIONAL BOOSTER PUMP.................................. 2-10

2.8.1 Connecting................................................................................................................... 2-10

2.8.2 Start Up........................................................................................................................ 2-11

2.8.3 Shutdown..................................................................................................................... 2-11

2.8.4 Disconnecting .............................................................................................................. 2-11

BURNER ADJUSTMENT AND SHUTDOWN

3.1 NATURAL GAS/LIQUID PROPANE VAPOR ................................................................... 3-1

3.1.1 Burner Adjustment ....................................................................................................... 3-1

3.1.1.1 Fuel Pressure Adjustment ................................................................................... 3-2

3.1.1.2 Air Setting and Adjustment .................................................................................. 3-2

3.1.1.3 O

2

Content Sampling ........................................................................................... 3-3

3.1.1.4 Smoke Spot Sampling ......................................................................................... 3-3

3.1.2 Burner Shutdown ......................................................................................................... 3-3

3.2 DIESEL/FUEL OIL ............................................................................................................. 3-3

3.2.1 Burner Adjustment ....................................................................................................... 3-3

3.2.1.1 Fuel Pressure Adjustment ................................................................................... 3-4

3.2.1.2 Air Setting and Adjustment .................................................................................. 3-4

3.2.1.3 O

2

Content Sampling ........................................................................................... 3-4

3.2.1.4 Smoke Spot Sampling ......................................................................................... 3-4

3.2.2 Burner Shutdown ......................................................................................................... 3-5

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL

TABLE OF CONTENTS (continued)

Page

MAINTENANCE

4.1 ADDING HEAT TRANSFER FLUID.................................................................................. 4-1

4.1.1 To Clear a “LOW LEVEL FAULT”................................................................................ 4-1

4.2 BURNER INSTALLATION/CHANGEOVER ..................................................................... 4-2

4.2.1 From NG/LP to Diesel/Fuel Oil .................................................................................... 4-2

4.2.1.1 Installation ........................................................................................................... 4-2

4.2.1.2 Setup ................................................................................................................... 4-3

4.2.2 From Diesel/Fuel Oil to NG/LP ................................................................................... 4-3

4.2.2.1 Installation ........................................................................................................... 4-4

4.2.2.2 Setup ................................................................................................................... 4-4

4.3 HIGH ELEVATION OPERATIONS.................................................................................... 4-5

4.4 RECOMMENDED FUELS ................................................................................................. 4-5

4.5 SUMMER STORAGE INSTRUCTIONS ............................................................................ 4-6

4.6 PRE-SEASON MAINTENANCE........................................................................................ 4-6

TRANSPORTING THE PUREHEAT™ HYDRONIC AIR HEATER

5.1 TOWING............................................................................................................................. 5-1

5.2 AERIAL LIFTING............................................................................................................... 5-1

5.3 TRANSPORTING on a FLATBED .................................................................................... 5-1

5.4 COMMON MECHANICAL INSPECTIONS PRIOR TO TRANSPORTING ....................... 5-1

TROUBLESHOOTING

6.1 TROUBLESHOOTING CHART......................................................................................... 6-1

6.2 HTF LOW LEVEL FAULT AND LIGHTS .......................................................................... 6-3

6.2.1 Low Level Shutdown Device ....................................................................................... 6-3

6.2.2 Testing the Low Level Shutdown Device .................................................................... 6-3

6.3 BURNER CONTROL LOCKOUT ...................................................................................... 6-4

6.3.1 Gas Burner Control...................................................................................................... 6-4

6.3.2 Oil Burner Control........................................................................................................ 6-4

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’SMANUAL

TABLE OF CONTENTS (continued)

Page

APPENDIX A

PUREHEAT SCHEMATIC AND WIRING DIAGRAM SYMBOL LEGEND ................................. A-1a

PUREHEAT SCHEMATIC AND WIRING DIAGRAM SYMBOL LEGEND ................................. A-1b

PUREHEAT SCHEMATIC AND WIRING DIAGRAM SYMBOL LEGEND ................................. A-1c

PUREHEAT CONTROL PANEL EXTERIOR LAYOUT.................................................................A-2

PUREHEAT TEMPERATURE CONTROL..................................................................................... A-3

PUREHEAT CONTROL PANEL DOOR INTERIOR LAYOUT...................................................... A-4

PUREHEAT MAIN CONTROL PANEL - EXTERIOR COMPONENT FUNCTION

AND IDENTIFICATION ............................................................................................................. A-5

PUREHEAT MAIN CONTROL PANEL INTERIOR COMPONENT LAYOUT...............................A-6

PUREHEAT MAIN CONTROL PANEL INTERIOR COMPONENT

FUNCTION AND IDENTIFICATION.......................................................................................... A-7

PUREHEAT WIRING SCHEMATIC – CIRCUIT 1 ........................................................................ A-8

PUREHEAT WIRING SCHEMATIC - CIRCUIT 1 WITH DIESEL BURNER ................................. A-9

PUREHEAT SAFETY CONTROLS – DIESEL BURNER WIRING ............................................. A-10

PUREHEAT WIRING SCHEMATIC - CIRCUIT 1 WITH NP/LP BURNER..................................A-11

PUREHEAT DIESEL BURNER CONTROL SEQUENCE OF OPERATION

AND LOCKOUT ...................................................................................................................... A-12

PUREHEAT SAFETY CONTROLS NG/LP BURNER WIRING DIAGRAM ................................ A-13

PUREHEAT WIRING SCHEMATIC – CIRCUIT 2 .......................................................................A-14

PUREHEAT SCHEMATIC - AUXILIARY PUMP PANEL (P/N A109-199)..................................A-15

PUREHEAT CIRCULATION - BOOSTER PUMP MOTOR WIRING........................................... A-16

PUREHEAT REWIND MOTOR WIRING ..................................................................................... A-17

PUREHEAT SAFETY CONTROLS LOW LEVEL SHUTDOWN DEVICE (P/N E100-198) ........ A-18

HX200 HEAT XCHANGER™ WIRING DIAGRAM ...................................................................... A-19

HX100 HEAT XCHANGER™ WIRING DIAGRAM ...................................................................... A-20

HX50 HEAT XCHANGER™ WIRING DIAGRAM........................................................................A-21

PUREHEAT TRAILER JUNCTION BOX AND BATTERY WIRING............................................ A-22

PUREHEAT TRAILER WIRING...................................................................................................A-23

PUREHEAT NG/LP BURNER COMPONENT IDENTIFICATION (P/N P100-673)..................... A-24

PUREHEAT NG/LP BURNER (P/N P100-673)

GAS PRESSURE CHECKING AND ADJUSTING ................................................................ A-25

PUREHEAT DIESEL BURNER COMPONENT IDENTIFICATION (P/N P100-690).................. A-26

SUGGESTED METHOD FOR SECURING THE PUREHEAT ONTO A TRUCK BED ............... A-27

PUREHEAT HOSE REWIND PARTS IDENTIFICATION............................................................A-28

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL

TABLE OF CONTENTS (continued)

Page

APPENDIX B

PUREHEAT AIR AND SURFACE HEATING ACCESSORIES.....................................................B-1

BOOSTER PUMP TO PUREHEAT CONNECTING ......................................................................B-2

HX200 HEAT XCHANGER™ TO PUREHEAT CONNECTION LAYOUT ....................................B-3

HX100 HEAT XCHANGER™ TO PUREHEAT CONNECTION LAYOUT ....................................B-4

HX50 HEAT XCHANGER™ TO PUREHEAT CONNECTION LAYOUT ......................................B-5

PUREHEAT 18,000 SQ. FT THAW LAYOUT

(THREE HHS 3004’S AND THREE 4-PORT MANIFOLDS) .................................................B-6

PUREHEAT 30,000 SQ. FT CURE LAYOUT

(FIVE HHS 3004’S AND FIVE 4-PORT MANIFOLDS) .........................................................B-7

PUREHEAT 45,000 SQ. FT FROST PREVENTION LAYOUT

(FIVE HHS 3004'S AND FIVE 4-PORT MANIFOLDS)..........................................................B-8

PUREHEAT VALVE POSITIONS FOR ADDING HTF (MACHINE IN USE).................................B-9

PUREHEAT VALVE POSITIONS FOR ADDING HTF (MACHINE NOT IN USE) ......................B-10

PUREHEAT QUICK-CONNECT AND CAM-LOCK CARE AND MAINTENANCE.....................B-11

APPENDIX C

PUREHEAT APPLICATIONS AND CAPACITIES ....................................................................... C-1

PUREHEAT™ HYDRONIC AIR HEATER

OPERATOR’S MANUAL SPECIFICATIONS

SPECIFICATIONS

Dimensions

and Capacities

Length 172 in. (437 cm)

Width 93 in. (236 cm)

Height 93 in. (236 cm)

Ground Clearance 9 in. (23 cm)

Weight 7,155 lbs (3,248 kg)

Optional Diesel Fuel Tank 435 US gallons (1,647 liters)

Weight with Optional Diesel Fuel Tank 11,230 lbs (5,098 kg)

Heat Transfer Fluid 145 US gallons (549 liters)

Pump, 1.5 hp Centrifugal 1

Circulation Hose Total: 1,000 ft (305 m) (see breakdown below)

4 x 100 ft [30 m]

4 x 50 ft [15 m]

Hose Reel 1

Hose Rewind 120 VAC, w/12 VDC clutch

Circulation Loops 5

Tires LT235/85R16

Tire Inflation 80 psig (752 kPa) cold

Hitch 3 in. Pintle or 2

5

/

16

in. Ball

Heat Exchangers 200,000 BTU/H (2,400 cfm) 4

100,000 BTU/H (1,315 cfm) 8

50,000 BTU/H (710 cfm) 16

Remote Manifold (not included with HX200 package) 4

Loading Ramp (not included with HX50 package) 1

On-Board Manifold (Supply/Return) 1

Lifting Bail Standard

Performance (choice of fuels)

Burner Orifice (NG/LP Burner) 5/8 in

Propane, Input 860,000 BTU/H

Natural Gas, Input 860,000 BTU/H

Burner Nozzle (Diesel Burner) 5.0 60º A (solid)

Diesel, Input 860,000 BTU/H

Efficiency 83%

Temperature Control Digital

Fuel Consumption During Burner Operation:

(Propane) 344 CFH

(Natural Gas) 860 CFH

(Diesel) 6.1 GPH

Electrical Requirement 1 x 15 amp. and 1 x 20 amp. x 120 VAC

Normal Operating Temperature 180ºF (82 ºC)

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL

LIST OF ABBREVIATIONS

The following is a list of abbreviations used throughout the Operator’s Manual:

Abbreviation/Symbol

Term/Meaning

amp. ampere (measurement of electrical current)

asl above sea level

BTU British Thermal Unit (measurement of heat energy)

°C degrees Celsius (metric measurement of temperature)

CFM Cubic Feet per Minute (measurement of air flow)

cm centimeter (1/100

th

of a meter)

CSA Canadian Standards Association

°F degrees Fahrenheit (measurement of temperature)

ft foot/feet (measurement of length/distance)

ft

2

square foot/square feet (measurement of area)

ft-lbs foot pounds (measurement of torque)

gph gallons per hour (measurement of liquid flow)

GFI Ground Fault Interrupt/interrupter (protection device)

GHI Ground Heaters, Incorporated

GVWR Gross Vehicle Weight Rating

HHS Ground Heaters Hose Handling System

hr hour (measurement of time)

HTF Ground Heaters Heat Transfer Fluid

Hz Hertz (measurement of frequency)

ID measurement of Inner Diameter

in. inch/inches (measurement of length/distance)

kg kilogram (metric measurement of weight)

Kilo-Cal Kilo-Calorie = 1000 Calories (metric measurement of heat energy)

kPa kilo-Pascals (metric measurement of pressure)

kW kilo-Watt (measurement of electrical power)

lb pound (measurement of weight)

LWCO Low Water Cut Off Device

m meter (metric measurement of length/distance)

MGV Main Gas Valve (NG / LP Fuel)

mm millimeter (1/1000

th

of a meter)

NHTSA National Highway Transportation Safety Administration

psig pounds per square inch gauge (measurement of pressure)

Rev. Revision

TC Temperature Controller

USDOT United States Department of Transportation

V. Version

VAC Volts, Alternating Current

VDC Volts, Direct Current

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL – SECTION 1

INTRODUCTION

The Pureheat™ Hydronic Air Heater provides temporary air heat, thaws frozen ground, cures concrete

and provides frost prevention at ambient temperatures below 40°F (5°C). Ground Heaters, Inc.’s

revolutionary technology enables construction activities to continue throughout the cold weather months.

The Pureheat™ Hydronic Air Heater is equipped with a 5-Port On-Board Manifold and 1,000 ft (396 m) of

1 in. (25 mm) ID Red Circulation Hose Assemblies with Quick-Connects (QCs). The standard equipment

package includes the following lengths of Circulation Hoses: Two (2) 200 ft (61 m), Four

(4) 100 ft. (30 m ),

Four (4) 50 ft (15 m)

. The optional diesel or gas Burner heats the Heat Transfer Fluid (HTF) to 180°F

(82°C). The HTF is continuously circulated through the Circulation Hoses in a vented, closed-loop

system.

With standard equipment, the Pureheat:

(Refer to Appendixes B and C)

• Provides remote space heating for up to 1,200,000 ft

3

(48,235 m

3

) of building space.

Using GHI’s optional Booster Pump and Auxiliary Pump Panel, Three (3) Hose Handling System 3004

(HHS3004) with Twelve (12) 750 ft (228 m) 5/8 in. ID Heat Transfer Hoses (HTH) and three 4-Port

Remote Manifolds, the Pureheat will:

• Thaw

up to 18,000 ft

2

(1,674 m

2

) of frozen ground per application using 24 in. (60 cm) hose

spacing.

• Thaw

up to 9,000 ft

2

(837 m

2

) 75% to 100% faster using 12 in. (30 cm) hose spacing

Using GHI’s optional Booster Pump and Auxiliary Pump Panel, Five (5) Hose Handling System 3004

(HHS3004) with Twenty (20) 750 ft (228 m) 5/8 in. ID Heat Transfer Hoses (HTH) and Five (5) 4-Port

Remote Manifolds, the Pureheat can:

• Cure

all types of concrete placements, including slabs on grade, elevated slabs, tilt-up walls,

poured walls, columns, footings, bridge decks, etc. up to 30,000 ft

2

(2,790 m

2

) per application

using 24 in. (60 cm) hose spacing.

• Provides Frost Prevention

up to 45,000 ft

2

(4,186 m

2

) per application using 36 in. (91 cm) hose

spacing.

The Pureheat™ Hydronic Air Heater Model Pureheat:

• Heats

workspace easily & economically:

• Input of 860,000 BTUH.

• Fuel flexible; choice of natural gas, propane or diesel.

• Takes only minutes to change over from one fuel to another.

• Provides pure, dry, hot air

– no moisture added to workspace; prevents mold and mildew.

• Removes excess moisture

– dry / warm air removes moisture from workspace and building materials.

• Provides pure, clean air

– no combustion by-products in workspace.

• Is self-contained

– all system components are on One (1) trailer.

• Is rental friendly

– easy setup and uses only One (1) 15 amp. And One (1) 20 amp. 120 volts AC

circuits.

• Is multi-functional

– with accessories, this system can be used as a surface heater.

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL – SECTION 1

1.1 EXTERNAL FEATURES

(Photo 1-1)

1. Adjustable 3 in. (76 mm) Pintle Style Hitch or 2

5

/

16

in. (59 mm) Ball

2. Lifting Bail

3. Door Tieback

4. Lockable Doors

5. Electric Brakes with Breakaway Switch

6. Performance Monitoring Light

7. 5-Port On-Board Manifold Door

8. Heavy Duty Jack-Stand

9. Heavy Duty Fenders

1-1

1

2

3

4

5

6

7

8

9

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL – SECTION 1

1-2

1

2

3

9

10

11

16

5

6

7

4

8

14

13

15

12

17

18

19

1.2 INTERNAL COMPONENTS

(Photos 1-2 through 1-6)

1.2.1 Heater with Burner Options

(Photo 1-2)

The following components are accessed via the side door:

1. Main Control Panel 10. Main Pump

2. Hydronic Heater and Expansion Tank (not shown) 11. Rewind Foot Pedal

3. Natural Gas (NG)/Liquid Propane (LP) Burner 12. Return Temperature Gauge

4. NG/LP Gas Train 13. Pressure Gauge

5. NG/LP Gas Pressure Regulator 14. Return Flow Indicator

6. NG/LP Main Gas Valve 15. Operator’s Manual Holder

7. NG/LP Secondary Gas Valve 16. Performance Monitoring Power Receptacle

8. NG/LP Pilot Gas Valve 17. Low Level Shutdown Device

9. Hose Reel with 1,000 ft (305 m) 1 in. ID 18. HTF Sight Gauge and Decal

Red Circulation Hoses with Quick-Connects (QCs) 19. Optional Auxiliary Pump Panel (not shown)

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL – SECTION 1

1-3

1

6

2 3 4

5

8

1-4

10

11

12

13

14

1.2.2 Heater with Optional Burner Detail

(Photos 1-3 and 1-4)

The following components are accessed via the Side Door:

1. Natural Gas (NG)/Liquid Propane (LP) Supply 8. NG/LP Gas Train

Gas Connection 9. NG/LP Burner Control (not shown)

2. NG/LP Gas Pressure Regulator 10. Diesel Burner

3. NG/LP Main Gas Valve 11. Diesel Burner Control

4. NG/LP Secondary Gas Valve 12. Diesel Return Fuel Line and QC

5. NG/LP Pilot Gas Valve 13. Diesel Supply Fuel Line and QC

6. NG/ LP Gas Burner 14. Diesel Fuel Filter and QC

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL – SECTION 1

1.2.3 Inside Rear Doors

The following components are located inside the Rear Door: (Photo 1-5 through 1-8)

1. HX200 Heat Xchangers

TM

2. Cab Interior Light and Remote Manifold Storage Location – not shown)

3. Ramp Alignment Pins

4. Ramp Storage and Remote Manifold Storage (not shown)

1-5

3

2

1

4

1-6

HX50 (LOADED)

1-7

HX100 (LOADED)

1-8

HX200 (LOADED)

PUREHEAT™ HYDRONIC AIR HEATER OPERATOR’S MANUAL – SECTION 1

1.3 IDENTIFICATION

The Pureheat™ Hydronic Air Heater serial number is located on the Main Control Panel. Always

reference the Pureheat serial number when ordering parts or requesting technical assistance.

1.4 SAFETY FEATURES

Pureheat™ Hydronic Air Heaters are safe, quality equipment, are NHTSA

compliant, meet all state

requirements, meet all Transport

Canada requirements, and are CSA certified.

Specific safety features include:

1. Trailer Brakes

: electric with breakaway switch (12 VDC).

2. Hydronic Heater

: operates at zero (atmospheric) pressure.

3. Low Level Shutdown Device

: turns off the Burner and Pumps if HTF level in the system drops below

minimum operating level. Manual reset requirement prevents unsupervised Pump/Burner start up.

4. Ground Fault Interrupters (GFI)

: built into control panel to protect all circuits.

5. Circuit Overload Protection

: built into Main Control Panel to protect all circuits and components.

6. Burner Flame Monitoring

: Burner Control uses optic flame sensor to shut off Burner if flame fails to

ignite or upon loss of flame. Manual reset requirement prevents unsupervised restart.

7. Pump Motor Overload Protection

: internal thermal overload trip with automatic reset.

8. Burner Motor Overload Protection

: internal thermal overload trip with manual reset (diesel Burner

Motor only) and internal thermal overload trip with automatic reset (NG/LP only).

9. Reflective Markers

: enhance night identification.

10. Foot Pedal

: for Hose Rewind system wired with low voltage (12 VDC) signal to protect personnel

from shock hazard should the Foot Pedal become accidentally immersed in water.

11. Digital Temperature Control

: fails safe (Burner OFF) upon loss of power or temperature sensor

malfunction

12. System Over Temperature Backup Shutdown

: Bi-metal snap disc will shut down the Burner Blower

Motor should HTF temperature exceed 200°F.

13. Natural Gas (NG) / Propane (LP) Burner

:

a. Ten (10) Second Pre-Purge Timer

b. Automatic Burner Sequencing

c. Flame Monitoring

d. System Status Indication

e. System / Self-Diagnostics

f. Post-Purge Timer

g. Pilot Valve / Ignition

h. Infrared Flame Detector

i. Air Flow Proving Switch

1.5 SAFETY PRECAUTIONS

Ground Heaters, Inc. develops and manufactures equipment that is safe to operate. However, an

accident could occur if

the Pureheat™ Hydronic Air Heater is used improperly. Safe operation requires

that all

instructions and precautions be followed. Key safety precautions are posted on decals throughout

the machine. Read and understand all material in this Operator’s Manual and on the decals posted on

the

Pureheat before attempting to operate it.

Page is loading ...

Wacker Neuson G 2.1A User manual

This manual is also suitable for

Wacker Neuson G 2.1A User manual

Related papers

Other documents