Casio PX-750 User manual

Brand: Casio

Model: PX-750

Category: Recording Equipment

Type: User manual

This manual is also suitable for

Privia PX-750

PX750-ES-1A

USER’S GUIDE

GUÍA DEL USUARIO

Please keep all information for future reference.

Guarde toda información para tener como referencia futura.

Safety Precautions

Before trying to use the piano, be sure to read

the separate “Safety Precautions”.

Precauciones de seguridad

Antes de intentar usar el piano, asegúrese de

leer las “Precauciones de seguridad” separadas.

EnglishEspañol

75 0

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important!

Please note the following important information before using this product.

• Before using the AD-A12150LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power

cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.

• The product is not intended for children under 3 years.

• Use only CASIO AD-A12150LW adaptor.

• The AC adaptor is not a toy.

• Be sure to disconnect the AC adaptor before cleaning the product.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the

apparatus.

The P (POWER) indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.

When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate

the apparatus in a way that secures easy access to the power cord.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Declaration of Conformity

Model Number: PX-750

Trade Name: CASIO COMPUTER CO., LTD.

Responsible party: CASIO AMERICA, INC.

Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Manufacturer:

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:

CASIO EUROPE GmbH

Casio-Platz 1, 22848 Norderstedt, Germany

This mark applies in EU countries only.

Declaration of Conformity According to EU Directive

E-1

English

Contents

General Guide ................................... E-2

FUNCTION Button...................................................... E-3

Saving Settings and Using Operation Lock ................ E-3

Power Outlet...................................... E-4

Using an AC Adaptor .................................................. E-4

Turning Power On or Off............................................. E-4

Connections...................................... E-6

Connecting Headphones ............................................ E-6

Connecting Audio Equipment or an Amplifier ............. E-6

Bundled and Optional Accessories............................. E-7

Playing with Different Tones ........... E-8

Selecting and Playing a Tone ..................................... E-8

Layering Two Tones ................................................. E-10

Using Effects............................................................. E-11

Using the Digital Piano’s Pedals............................... E-11

Using the Metronome ............................................... E-12

Playing a Piano Duet ................................................ E-13

Playing Back Built-in Songs .......... E-14

Playing Back All of the Built-in Songs....................... E-14

Playing Back a Specific Music Library Song............. E-15

Practicing with a Music Library Song........................ E-15

Recording and Play Back............... E-16

Tracks ....................................................................... E-16

To record to a specific track of a song...................... E-17

To record to one track of a song while

listening to the playback of the other track ............... E-18

Playing Back from Digital Piano Memory.................. E-18

Deleting Recorded Data ........................................... E-19

Configuring Settings with the

Keyboard ......................................... E-20

To configure settings with the keyboard....................E-20

Keyboard Keys Used for Configuring Settings.......... E-21

Parameter List...........................................................E-22

Tone selection ....................................................... E-22

Reverb ................................................................... E-22

Chorus ................................................................... E-22

Brilliance ................................................................ E-22

Layer balance ........................................................ E-22

Tempo (TEMPO) ................................................... E-22

Song select (SONG SELECT) ............................... E-22

Song volume.......................................................... E-22

Metronome beat (METRONOME BEAT) ............... E-22

Metronome volume ................................................E-22

Keyboard key (Transpose) .................................... E-23

Keyboard tuning (Tuning) ...................................... E-23

Octave shift............................................................ E-23

Temperament ........................................................ E-23

Temperament select..............................................E-23

Temperament Base note .......................................E-23

Touch response (TOUCH RESPONSE)................ E-23

USB device mode .................................................. E-24

Send channel......................................................... E-24

Local control .......................................................... E-24

Operation tone....................................................... E-24

Back up.................................................................. E-24

Operation lock........................................................ E-24

Connecting to a Computer............. E-25

Minimum Computer System Requirements .............. E-25

Connecting the Digital Piano to Your Computer ....... E-25

Using MIDI ................................................................ E-26

Transferring Song Data with a Computer.................. E-26

Reference......................................... E-33

Troubleshooting ........................................................ E-33

Product Specifications............................................... E-34

Operating Precautions .............................................. E-35

Appendix............................................ A-1

Tone List ..................................................................... A-1

Song List ..................................................................... A-1

MIDI Implementation Chart

Company and product names used in this manual may

be registered trademarks of others.

Assembling the Stand ............................................................................................... E-29

Unpacking................................................................. E-29

Assembling the Stand............................................... E-29

To connect the cable................................................. E-32

To install the music stand..........................................E-32

E-2

General Guide

21 3 4 5 6 8 97

bk bl bm

Bottom

Front

Rear

General Guide

E-3

English

NOTE

• The names shown here are always indicated in bold when they appear within the text of this manual.

The FUNCTION button is used when configuring a variety of different digital piano settings. The following are

FUNCTION button basics.

z To change a setting, hold down the FUNCTION button as you press the

keyboard key that is assigned the setting you want to select.

An operation confirmation tone will sound whenever you press a

keyboard key to configure a setting.

Example: “To select a tone” on page E-8

NOTE

• For details about operations and settings, see “Configuring Settings with

the Keyboard” on page E-20.

z The following table shows how pressing the FUNCTION button changes the operation of certain buttons.

Your digital piano lets you save its current settings and lock its buttons to protect against operation errors. For

details, see “Parameter List” on pages E-22 - E-24.

FUNCTION Button

This button: Does this while FUNCTION button is depressed:

SONG a Starts and stops demo tune play.

RECORDER Selects the left-hand part and the right-hand part.

METRONOME Toggles Duet on and off.

Saving Settings and Using Operation Lock

1 P (POWER) button

2 VOLUME controller

3 FUNCTION button

4 SONG a, DEMO button

5 RECORDER (L/R) button

6 METRONOME, DUET button

7 GRAND PIANO (CONCERT) button

8 GRAND PIANO (MODERN) button

9 ELEC PIANO button

bk Pedal connector

bl USB port

bm DC 12V terminal

bn PHONES jacks

bo Power lamp

E-4

Power Outlet

Your digital piano runs on standard household power.

Be sure to turn off power whenever you are not using

the digital piano.

Use only the AC adaptor (JEITA Standard, with unified

polarity plug) that comes with this digital piano. Use of

a different type of AC adaptor can cause malfunction

of the digital piano.

Specified AC Adaptor: AD-A12150LW

• Use the supplied power cord to connect the AC

adaptor as shown in the illustration below.

Note the following important precautions to avoid

damage to the power cord.

During Use

• Never pull on the cord with excessive force.

• Never repeatedly pull on the cord.

• Never twist the cord at the base of the plug or

connector.

During Movement

• Before moving the digital piano, be sure to unplug

the AC adaptor from the power outlet.

During Storage

• Loop and bundle the power cord, but never wind it

around the AC adaptor.

IMPORTANT!

• Never connect the AC adaptor (JEITA Standard,

with unified polarity plug) that comes with this digital

piano to any other device besides this piano. Doing

so creates the risk of malfunction.

• Make sure the digital piano is turned off before

plugging in or unplugging the AC adaptor.

• The AC adaptor will become warm to the touch after

very long use. This is normal and does not indicate

malfunction.

Press the P (POWER) button to turn on

digital piano power.

• This causes the P (POWER) button to light.

• When you turn on the digital piano, it performs a

power up operation in order to initialize its system.

During system initialization the tone button lamps

cycle on and off in the sequence for about five

seconds to let you know that system initialization is

in progress.

To turn off the digital piano, hold down the P

(POWER) button until its light goes out.

NOTE

• Pressing the P (POWER) button to turn off power

actually puts the digital piano into a standby state.

Minute amounts of current continue to flow within

the digital piano in the standby state. If you do not

plan to use the digital piano for a long time or if

there is a lightning storm in your area, be sure to

unplug the AC adaptor from the power outlet.

Using an AC Adaptor

Household power outlet

Power cord

DC 12V terminal

AC adaptor

• Configuration and type depends on

your geographic location.

Turning Power On or Off

English

Power Outlet

E-5

Auto Power Off

This digital piano is designed to turn off automatically

to avoid wasting power after no operation is

performed for a preset amount of time. The Auto

Power Off trigger time is about four hours.

• You also can use the procedure below to temporarily

suspend Auto Power Off.

■ To disable Auto Power Off

While the digital piano is turned on, press the

P (POWER) button to turn it off.

While holding down the FUNCTION button,

press the P (POWER) button to turn on the

digital piano.

• Auto Power Off will be disabled at this time.

NOTE

• Turning off the digital piano after performing the

above steps will re-enable Auto Power Off.

E-6

Connections

IMPORTANT!

• Whenever connecting something to the digital piano,

first use the VOLUME controller to set the volume to

a low level. After connecting, you can adjust the

volume to the level you want.

Connecting headphones to either of the PHONES jack

cuts off output to the speakers, which means you can

practice even late at night without bothering others. To

protect your hearing, make sure that you do not set the

volume level too high when using headphones.

NOTE

• Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

• If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor

plugged in when you unplug the headphones. If you

do, nothing will sound from the speakers when you

play.

You can connect audio equipment or a music amplifier

to the digital piano and then play through external

speakers for more powerful volume and better sound

quality.

Connecting Audio Equipment (Figure 1)

Use commercially available connecting cords

(Standard Plug × 1, Pin Plugs × 2) to connect as shown

in Figure 1. Make sure that the end of the cord that

you connect to the digital piano is a stereo standard

plug. A monaural standard plug will result in output of

only one of the two stereo channels. Normally, you

should set the input selector of the audio equipment to

the terminal where the digital piano is connected (AUX

IN, etc.) Adjust volume using the digital piano’s

VOLUME controller.

Connecting a Music Amplifier (Figure 2)

Connect the connecting cord* to one of the types of

amplifiers shown in Figure 2.

Adjust volume using the digital piano’s VOLUME

controller.

Connecting Headphones

Stereo standard plug

PHONES jacks

Front

Connecting Audio Equipment

or an Amplifier

* Digital Piano: Stereo standard plug

Amplifier : Inputs signals for the left and right

channels. Not connecting either plug

will result in output of only one of the

two stereo channels.

INPUT 1

INPUT 2

Audio amplifier AUX IN jack, etc.

Guitar amplifier

Keyboard amplifier, etc.

Pin plug

Pin jack Standard plug

RIGHT (Red)

To either of the digital piano’s PHONES jack

Stereo standard plug

Pin plug (red)

Pin plug (white)

LEFT (White)

English

Connections

E-7

Use only accessories that are specified for use with this

digital piano.

Use of unauthorized accessories creates the risk of fire,

electric shock, and personal injury.

NOTE

• You can get information about accessories that are

sold separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

http://world.casio.com/

Bundled and Optional

Accessories

E-8

Playing with Different Tones

The piano comes with 18 built-in tones.

• The names of the tones are marked above the keyboard keys to which they are assigned.

To select a tone

Select the tone you want.

Use the VOLUME controller to adjust the volume.

Selecting and Playing a Tone

SONG a

FUNCTION

METRONOME ELEC PIANO

GRAND PIANO

VOLUME

z To select GRAND PIANO (CONCERT or

MODERN) or ELEC PIANO

• Press one of the GRAND PIANO buttons

(CONCERT or MODERN) or the ELEC PIANO

button to select the one you want.

• The button lamp of the selected tone will light.

z To select one of the other tones

• While holding down the FUNCTION button,

press the keyboard key that corresponds to the

tone you want to select.

English

Playing with Different Tones

E-9

NOTE

• Of the digital piano’s 18 built-in tones, the first five

are grand piano tone. Each tone has its own

distinctive merits, so you should select the tone that

suits the song you are playing along with or your

own personal preferences. The CONCERT and

MODERN tones are assigned to buttons for quick

and easy selection.

* Feature that applies computer morphing

technology to enable seamless changes between

sounds sampled at various dynamics from a full

concert grand piano.

Bass Tones (BASS 1, BASS 2)

Selecting either of the two BASS (LOWER) tones (1 or

2) in step 1 of the above procedure will assign the

selected bass tone to the low range (left side) of the

keyboard. The high range (right side) will be assigned

the tone that was selected when you pressed the

BASS 1 or BASS 2 key.

• BASS 1 and BASS 2 let you effectively split the

keyboard between two different tones.

NOTE

• To return the keyboard to a single tone, select any

tone other than BASS 1 or BASS 2.

• You cannot select BASS 1 or BASS 2 when recording

to Track 2.

Tone Name Characteristics

CONCERT This is a full concert grand piano tone

that uses Linear Morphing* for

dynamic and natural tone changes.

This tone is designed to reproduce

damper, resonance, and other piano

nuances, which makes it ideal for

virtually any type of piano

performance.

MODERN This tone provides a bright grand piano

sound. The volume and timbre of this

tone is quick to respond to different

keyboard pressures, and it has

relatively deep reverb. This tone is a

good choice for dynamic and lively

performances.

CLASSIC This is a natural piano tone that closely

resembles the sound of an acoustic

piano. Though reverb and other flashy

effects are subdued for this tone,

resonance is more pronounced, which

enables expression of delicate nuances.

This tone is a good choice for lesson

and practice sessions.

MELLOW Warm and mellow piano tone

BRIGHT Bright and clear piano tone

Split Point

Low Range High Range

BASS 2 PIPE ORGAN

(Currently selected tone.)

E-10

Playing with Different Tones

Use the following procedure to layer two tones, so they

sound at the same time.

When specifying two tones for layering, first tone you

select will be the main tone, while the second tone will

be the layered tone.

While holding down the FUNCTION button,

press down the keyboard key for the first tone

you want to layer and then the key for the

second tone.

Example: First press the HARPSICHORD key and

then the ELEC ORGAN 1 key.

To unlayer the keyboard, select another tone

by pressing the GRAND PIANO button or by

using the procedure under “Selecting and

Playing a Tone” (page E-8).

NOTE

• You cannot layer the BASS 1 or BASS 2 tone with

another tone.

• You cannot perform the layer operation when

recording to Track 2.

To adjust the volume balance between

two layered tones

While holding down the FUNCTION button,

use the keyboard keys shown below to adjust

the volume of the layered tones.

• To return the volume setting to its initial default, hold

down the FUNCTION button and press both of the

keys at the same time.

Layering Two Tones

HARPSICHORD

ELEC ORGAN 1

C1 C2 C3 C4 C5 C6 C7 C8

Initial default (Center)

Volume of the main tone

(First tone you selected)

Volume of the layered tone

(Second tone you selected)

English

Playing with Different Tones

E-11

While holding down the FUNCTION button,

use the Reverb or Chorus keyboard key to

cycle through the available settings.

• Each press of the Reverb or Chorus keyboard key

causes the digital piano to beep according to which

setting is selected, as shown in the table below.

• Reverb

• Chorus

■ About DSP

DSP makes it possible to digitally produce complex

acoustic effects. The DSP is assigned to each tone

whenever you turn on digital piano power.

Your digital piano comes equipped with three pedals:

damper, soft, and sostenuto.

Pedal Functions

z Damper Pedal

Pressing the damper pedal while playing will cause the

notes you play to reverberate for a long time.

• When a GRAND PIANO tone (CONCERT/

MODERN/CLASSIC/MELLOW/BRIGHT) is

selected as the tone, pressing this pedal will cause

notes to reverberate (with damper resonance) just

like the damper pedal on an acoustic grand piano.

Half-pedal operation (pressing the pedal part way)

is also supported.

z Soft Pedal

Pressing this pedal while playing suppresses notes

played on the keyboard after the pedal was pressed,

and makes them sound softer.

z Sostenuto Pedal

Only the notes of the keys that are depressed when this

pedal is pressed are sustained until the pedal is

released.

Using Effects

Reverb : Makes your notes resonate.

Chorus: Adds more breadth to your notes.

Number of Beeps Setting

1 (long)

1 (short)

Off (OFF)

Room

Small Hall

Large Hall

Stadium

Number of Beeps Setting

1 (long)

1 (short)

Off (OFF)

Light Chorus

Medium Chorus

Deep Chorus

Flanger (whooshing effect)

ChorusReverb

Using the Digital Piano’s

Pedals

Soft pedal

Damper pedal

Sostenuto pedal

E-12

Playing with Different Tones

Press the METRONOME button.

• This starts the metronome.

• The lamp above the SONG a button flash in time

with the metronome beat.

To change the beat, hold down the

FUNCTION button as you press one of the

METRONOME BEAT keys to select a beat

setting.

• You can specify beats per measure value of 0, 2, 3, 4,

5, or 6. Specifying 0 as the setting plays a straight

click, without any chime. This setting lets you

practice with a steady beat.

While holding down the FUNCTION button,

use the TEMPO keys to specify a tempo

value in the range of 20 to 255 beats per

minute.

• Each press of the + or – key raises or lowers the

tempo value by 1.

• You can use the value input keys (0 to 9) to enter a

specific three-digit. Be sure to input all three digits.

Example: To enter “96”, press keys 0, 9, 6.

Press the METRONOME button or SONG

a button to turn off the metronome.

NOTE

• To return the tempo setting to the default tempo of

the currently selected Music Library tune, press the

+ and – keys at the same time in step 3. Pressing +

and – while recording will return the tempo value to

120.

To adjust the metronome volume

You can perform the following procedure at any time,

regardless of whether or not the metronome is

sounding.

While holding down the FUNCTION button,

use the METRONOME VOLUME keys to

specify a volume value in the range of 0 to 42.

• For details about using the keyboard keys for

settings, see “Keyboard Keys Used for Configuring

Settings” on page E-21.

• Each press of the T or S key raises or lowers the

metronome volume value by 1.

NOTE

• To return to the initial default setting, press T and

S at the same time.

Using the Metronome

English

Playing with Different Tones

E-13

You can use the Duet Mode to split the piano’s

keyboard in the center so two people can play a duet.

The left and right side keyboards have virtually the

same range. The left pedal operates as the left side

damper pedal, while the right pedal is the right side

damper pedal.

This makes it possible to configure the keyboard so, for

example, the teacher can play on the left and the

student can follow along on the right. Or one person

can play the left hand part on the left, while another

plays the right hand part on the right.

Pedal Operation when Playing a Duet

NOTE

• Only the damper pedal for the right side keyboard

supports half-pedal operations.

Select the piano tone you want to use for the

duet.

Example: GRAND PIANO (MODERN)

While holding down the FUNCTION button,

press the METRONOME button to toggle

duet on and off.

IMPORTANT!

• You cannot use the Duet Mode while recording

(page E-16).

Changing the Octaves of the duet

keyboards

You can change the ranges of the left and right

keyboards in octave units from their initial default

settings. This comes in handy, for example, if the initial

default range is not enough when one person is

playing the left hand part and another person is

playing the right hand part.

While holding down the FUNCTION and

METRONOME buttons, press the keyboard C

key that you want located at C4 (middle C) of

the left keyboard.

Example: Press the keyboard key of the leftmost C (C4)

will assign the range shown below.

While holding down the FUNCTION and

METRONOME buttons, press the keyboard C

key that you want located at C4 (middle C) of

the right keyboard.

NOTE

• You can return the keyboards to their initial default

ranges by exiting and then re-entering the Duet

Mode.

Playing a Piano Duet

C3 C4 C5 C6 C3 C4 C5 C

Keyboard

Split point

Left keyboard Right keyboard

(middle C)(middle C)

Left side damper pedal

Left and right side

damper pedal

Right side damper pedal

(Half-pedal operation

supported)

C4 C5 C6 C7 C3 C4 C5 C6

Left keyboard Right keyboard

(Pressed key)

1 octave higher than initial

setting

Unchanged

E-14

Playing Back Built-in Songs

Your digital piano comes with a Music Library of 60

built-in tunes. You can play all 60 tunes in sequence,

from beginning to end.

IMPORTANT!

• After you select a built-in song, it can take a number

of seconds for the song data to be loaded. While the

data is being loaded, the keyboard keys and button

operations will be disabled. If you are playing

something on the keyboard, the following operation

will cause output to stop.

While holding down the FUNCTION button,

press the SONG a button.

• This will start repeat demo playback of the built-in

songs in sequence, from 01 through 60.

• You can play along with a song on the keyboard as it

is playing. The tone assigned to the keyboard is the

one that is preset for the song that is playing.

To change demo playback to a different song,

hold down the FUNCTION button as you use

the SONG SELECT keys to specify a song

number.

• Each press of the + or – key raises or lowers the song

number by 1.

• You can use the value input keys (0 to 9) to enter a

specific two-digit song number. Be sure to input both

digits.

Example: To select song 08, enter 0 and then 8.

Press the SONG a button again to stop

built-in song play.

NOTE

• The tune selection and playback stop operations

described above are the only operations that are

possible during demo tune play.

SONG a

FUNCTION

RECORDER

Playing Back All of the Built-in

Songs

English

Playing Back Built-in Songs

E-15

The Music Library includes both built-in songs (01 to

60), plus songs (61 to 70) that have been saved to digital

piano memory from a computer*. You can use the

procedure below to select one of these songs and play it

back.

* You can download music data from the Internet and

then transfer it from your computer to digital piano

memory. See “Transferring Song Data with a

Computer” on page E-26 for more information.

Find the song number of the song you want to

play in the song list on page A-1.

To change to another song, hold down the

FUNCTION button as you use the SONG

SELECT keys to specify a song number.

• For information about how to perform this step, see

the note under step 2 of the procedure under

“Playing Back All of the Built-in Songs” on page E-14.

Press the SONG a button.

• This starts the playback of the song.

To stop playback, press the SONG a

button again.

• Playback will stop automatically when the end of the

song is reached.

NOTE

• Pressing the + and – keys at the same time will select

song number 01.

• You also can adjust the playback tempo and volume

of the song. See “Configuring Settings with the

Keyboard” on page E-20 for more information.

You can turn off the left hand part or right hand part of

a song and play along on the piano.

NOTE

• The Music Library includes a number of duets.

While a duet is selected, you can turn off the first

piano <Primo> or second piano <Secondo> tone

and play along with the song.

PREPARATION

• Select the song you want to practice and adjust the

tempo. See “Configuring Settings with the

Keyboard” on page E-20.

• A number of tunes have tempo changes part way

through in order to produce specific musical effects.

While holding down the FUNCTION button,

press the RECORDER (L/R) button to select

the part you want to turn off.

• Pressing a button toggles its part on (button lamp on)

and off (button lamp off).

Press the SONG a button.

• This starts playback, without the part you turned off

in step 1.

Play the missing part on the keyboard.

To stop playback, press the SONG a

button again.

Playing Back a Specific Music

Library Song

Practicing with a Music Library

Song

Left hand Right hand

Both parts on

Right hand

part off

Left hand

part off

E-16

Recording and Play Back

You can store the notes you play in digital piano

memory for later playback.

A track is a container of recorded data, and a song

consists of two tracks: Track 1 and Track 2. You can

record each track separately and then combine them so

they play back together as a single song.

Memory Capacity

• You can record approximately 5,000 notes in digital

piano memory.

• The RECORDER button lamp will flash at high

speed when memory runs low.

• Recording stops automatically if the number of

notes in memory exceeds the maximum.

Recorded Data

• Keyboard play

• Tone used

• Pedal operations

• Reverb and chorus settings (Track 1 only)

• Tempo setting (Track 1 only)

• Layer setting (Track 1 only)

• Split setting (Track 1 only)

• Temperament and base note settings (Track 1 only)

• Octave shift setting (Track 1 only)

Recording Data Storage

• Starting a new recording deletes any data that was

previously recorded in memory.

• If power to the Digital Piano is cut off while

recording is in progress, everything you recorded up

to that point will be deleted. Take care so power is

not turned off accidentally during recording

operations.

IMPORTANT!

• CASIO COMPUTER CO., LTD. takes no

responsibility for any damages, lost profits, or claims

by third parties arising from the deletion of recorded

data due to malfunction, repair, or for any other

reason.

Using the RECORDER Button

Each press of the RECORDER button cycles through

the recording options in the sequence shown below.

SONG a

FUNCTION

RECORDER

METRONOME

Tracks

Track 1 Record

While playing

back. . .

Track 2 Record

Song

Lit Flashing Off

Playback

Standby

Record

Standby

Normal

English

Recording and Play Back

E-17

After recording to either of the tracks of a song, you can

record to the other track while listening to playback

what you recorded in the first track.

Press the RECORDER button twice so its

lamp is flashing.

• At this time the L lamp will flash to indicate that the

digital piano is standing by for recording to Track 1.

To change the recording track, hold down the

FUNCTION button as you press the

RECORDER (L/R) button.

• Make sure that the indicator lamp for the record track

is flashing.

Track 1: L lamp

Track 2: R lamp

Example: Track 1 selected

Select the tone and effects (Track 1 only) you

want to use in your recording.

• Tone (page E-8)

• Effects (page E-11)

NOTE

• If you want the metronome to sound while you are

recording, configure the beat and tempo settings,

and then press the METRONOME button. See

“Using the Metronome” on page E-12 for more

information.

Start playing something on the keyboard.

• Recording will start automatically.

To stop recording, press the SONG a

button.

• This will cause the RECORDER button lamp and the

lamp of the track you recorded to change from

flashing to lit.

• To play back the track you just recorded, press the

SONG a button.

After you are finished recording or playing

back, press the RECORDER button so its

lamp goes out.

To record to a specific track of

a song

E-18

Recording and Play Back

Press the RECORDER button so its lamp is

lit.

While holding down the FUNCTION button,

press the RECORDER (L/R) button to select

the track you want to play back while

recording.

Press the RECORDER button so its lamp is

flashing.

• This will cause the L lamp to flash.

While holding down the FUNCTION button,

press the RECORDER (L/R) button to select

the track you want to record.

• Make sure that the indicator lamp for the record track

is flashing.

Example: To listen to playback of Track 1 as you record

to Track 2

Select the tone and effects (Track 1 only) you

want to use for your recording.

Press the SONG a button or play

something on the keyboard.

• This will start both playback of the recorded track

and recording to the other track.

To stop recording, press the SONG a

button.

Press the RECORDER button so its lamp is

lit.

NOTE

• When a song has something recorded in both tracks,

you can turn off one track and play back just the

other track, if you want.

Press the SONG a button.

• This starts playback of the song and/or track you

selected.

NOTE

• You can change the tempo setting as a track is

playing.

• Press the SONG a button again to stop playback.

To record to one track of a

song while listening to the

playback of the other track

Lit (Play) Flashing (Record Standby)

Playing Back from Digital

Piano Memory

Page is loading ...

Casio PX-750 User manual

Brand: Casio

Model: PX-750

Category: Recording Equipment

Type: User manual

This manual is also suitable for

Privia PX-750

Download PDF

report

Casio PX-750 User manual

This manual is also suitable for

Casio PX-750 User manual

Related papers