RIDGID WD1250 User manual

Brand: RIDGID

Model: WD1250

Category: Vacuum cleaners

Type: User manual

SAVE THIS MANUAL FOR FUTURE REFERENCE

ARNING:

o reduce the risk of injury, the user must read and understand the operator’s

manual before using this product.

Thank you for buying a RIDGID product.

WD1250

12 U.S. GALLONS/45 LITERS

WET/DRY VAC

FOR QUESTIONS OR INFORMATION CONTACT US AT

CALL 1-800-4-RIDGID (1-800-474-3443) OR

www.ridgidvacs.com

Part No. SP6663 Printed in Mexico

OPERATOR’S MANUAL

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 1

Table of Contents

Important Safety Instructions. . . . . . . . . 2

Introduction . . . . . . . . . . . . . . . . . . . . . . 4

Unpacking and Checking

Carton Contents . . . . . . . . . . . . . . . . . 4

Caster/Caster Foot Assembly . . . . . . . . 4

Replacement Filter Assembly . . . . . . . . 5

Wet/Dry Vac Assembly . . . . . . . . . . . . . 6

Cord Storage . . . . . . . . . . . . . . . . . . . 6

To Store Your Accessories. . . . . . . . . . . 7

Operation. . . . . . . . . . . . . . . . . . . . . . . . 7

Vacuuming Dry Materials . . . . . . . . . . 8

Vacuuming Liquids . . . . . . . . . . . . . . . 8

Emptying the Drum . . . . . . . . . . . . . . 8

Cord Maintenance . . . . . . . . . . . . . . . 9

Moving the Wet/Dry Vac. . . . . . . . . . . 9

Blowing Feature . . . . . . . . . . . . . . . . . 9

Maintenance . . . . . . . . . . . . . . . . . . . . 10

Filter . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cleaning and Disinfecting

the Wet/Dry Vac . . . . . . . . . . . . . . 11

Storage . . . . . . . . . . . . . . . . . . . . . . . 11

Casters . . . . . . . . . . . . . . . . . . . . . . . 11

Repair Parts. . . . . . . . . . . . . . . . . . . . . 12

Warranty . . . . . . . . . . . . . . . . . . . . . . . 14

IMPORTANT SAFETY INSTRUCTIONS

Section Page

Safety is a combination of using common

sense, staying alert, and knowing how

your wet/dry vacuum cleaner (“Vac”)

works.

Saf

ety Signal Words

DANGER: Indicates an imminently

hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING: Indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially

hazardous situation which, if not avoided,

may result in minor or moderate injury, or

property damage.

When using your Vac, always follow basic

safety precautions including the following:

WARNING - To

reduce the risk of fire, electric shock,

or injury:

• Read and understand this operator’s

manual and all labels on the Wet/Dry

Vac before operating.

• Use only as described in this manual.

•

Do not leave Vac running while

unattended - you may fail to notice

important signs indicating abnormal

operation such as loss of suction,

debris/liquid exiting exhaust, or

abnormal motor noises. Immediately

stop using Vac if you notice these

signs.

• Sparks inside the motor can ignite

flammable vapors or dust.

o reduce

the risk of fire or explosion, do not use

near combustible liquids, gases, or

dusts, such as gasoline or other fuels,

lighter fluid, cleaners, oil-based paints,

natural gas, coal dust, magnesium

dust, grain dust, aluminum dust, or gun

powder.

• Do not vacuum anything that is burning

or smoking, such as cigarettes,

matches, or hot ashes.

• Do not vacuum drywall dust, cold

fireplace ash, or other fine dusts with

standard filter. These may pass

through the filter and be exhausted

back into the air. Use a fine dust filter

instead.

• To reduce the risk of inhaling toxic

vapors, do not vacuum or use near

toxic or hazardous materials.

• To reduce the risk of electric shock,

do not expose to rain or allow liquid to

enter motor compartment. Store

indoors.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• Do not use with a torn filter or without

the filter installed except when

vacuuming liquids as described in this

manual. Dry debris ingested by the

impeller may damage the motor or be

exhausted into the air.

•

ARNING:

The power cord on this

product contains lead, a chemical

known in the State of California to cause

birth defects or other reproductive harm.

ash hands after handling.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 2

grounding system. Use only identical

replacement parts. Read the

instructions for Servicing Double-

Insulated Wet/Dry Vacs before

servicing.

• Use only extension cords that are rated

for outdoor use. Extension cords in

poor condition or too small in wire size

can pose fire and shock hazards. To

reduce the risk of these hazards, be

sure the cord is in good condition and

that liquid does not contact the

connection. Do not use an extension

cord with conductors smaller than 16

gauge (AWG) in size. To reduce power

loss, use a 14 gauge extension cord if

25 to 50 ft long and 12 gauge for 50 ft

or longer.

CAUTION:

• To reduce the risk of hearing damage,

wear ear protectors when using for

extended hours or using in a noisy

area.

• For dusty operations, wear dust mask.

•

Static shocks are common when the

relative humidity of the air is low.

Vacuuming fine debris with your Vac

can deposit static charge on the hose

or Vac. To reduce the frequency of

static shocks in your home or when

using this Vac, add moisture to the air

with a humidifier.

• Do not leave Vac when plugged in.

Unplug from outlet when not in use and

before servicing.

• Turn off Vac before unplugging.

• To reduce the risk of injury from

accidental starting, unplug power cord

before changing or cleaning filter.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Do not use with damaged cord, plug or

other parts. If your Vac is not working

as it should, has missing parts, has

been dropped, damaged, left outdoors,

or dropped into water, call customer

service.

• Do not pull or carry by cord, use cord

as handle, close a door on cord, or pull

cord around sharp edges or corners.

Do not run Vac over cord. Keep cord

away from heated surfaces.

• Do not handle plug, switch, or the Vac

with wet hands.

• Do not put any object into ventilation

openings. Do not vacuum with any

ventilation openings blocked; keep free

of dust, lint, hair or anything that may

reduce air flow.

• Keep hair, loose clothing, fingers, and

all parts of body away from openings

and moving parts.

• To reduce the risk of falls, use extra

care when cleaning on stairs.

• To reduce the risk of back injury or

falls, do not lift a Vac that is heavy with

liquid or debris. Partially empty the

Vac by scooping debris or draining

liquid to make it comfortable to lift.

• To reduce the risk of personal injury or

damage to Vac, use only Ridgid

recommended accessories.

• When using as a blower:

- Direct air discharge only at work

area.

- Do not direct air at bystanders.

- Keep children away when blowing.

- Do not use blower for any job except

blowing dirt and debris.

- Do not use as a sprayer.

- Wear safety eyewear.

• To reduce the risk of eye injury, wear

safety eyewear. The operation of any

utility Vac or blower can result in

foreign objects being blown into the

eyes, which can result in severe eye

damage.

• This Wet/Dry V

ac is double-insulated,

eliminating the need for a separate

Observe the following warnings that

appear on the motor housing of your Vac:

WARNING: For your own safety,

read and understand owner’s

manual. Do not run unattended.

Do not pick up hot ashes, coals,

toxic, flammable or other hazardous

materials. Do not use around

explosive liquids or vapors.

WARNING: To reduce the risk of

electric shock - do not expose to

rain - store indoors.

DOUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

SAVE THIS MANUAL

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 3

Unpacking and Checking Carton Contents

Introduction

This Wet/Dry Vac is intended for house-

hold use. It may be used for vacuuming

wet or dry media and may be used as a

blower.

Read this operator’s manual to familiarize

yourself with the product features and to

understand the specific usage of your

new Vac.

Car

ton Contents List

Key Description Qty

A Wet/Dry Vac ................................1

B Tug-A-Long Hose.........................1

C Caster ..........................................4

D Caster Foot w/Storage.................4

E Extension Wands .........................2

F Utility Nozzle ................................1

G Wet Nozzle...................................1

H Car Nozzle ...................................1

J Operator’s Manual .......................1

Remove entire contents of carton. Check

each item against the Carton Contents

List. Contact 1-800-4-RIDGID or E-mail

us at [email protected] if any parts

are damaged or missing.

1. Turn the dust drum upside down on

the floor.

2. Insert the caster feet into the bottom of

drum, as shown (4 places).

3. Push on the caster foot until the foot is

flush with bottom of the dust drum.

Insert the caster stem into the socket

of the caster foot, as shown (4

places).

5. Push on the caster until the ball on the

caster stem is inserted all the way into

the socket. You will hear the ball snap

into the socket and the caster will

swivel easily when positioning is

correct.

6. Turn the drum upright.

Caster/Caster Foot Assembly

Caster

Caster Stem

Caster Ball

Caster

Foot

Hole

Dust

Drum

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 4

1. Carefully slide the filter over the filter

cage, sliding it over the center ring

covering the 3 slots until the filter stops

against the lid.

2. Place filter nut and filter plate onto

threaded stud and tighten it down.

Finger tighten only.

NOTE: Lever of filter nut should be away

from plate as shown.

IMPORTANT: Do not overtighten as this

may deform or crack the filter cage, or

filter.

NOTE: If filter cage or float needs to be

replaced or removed, use a flat blade

screwdriver and insert the blade near one

of the tabs between the filter cage and

the center ring of the lid. Pry the tab out

of the slot. Tilt the cage and lift away from

the lid. To replace, follow the assembly

instructions below:

3. Place the float over the opening in the

center of the lid with the words "This

Side Towards Lid" laying face down

over the hole.

4. Line up filter cage tabs with slots in the

center ring of the lid.

5. Push on the filter cage until the tabs

snap into slots for a secure fit.

Replacement Filter Assembly

WARNING: For your own safety,

never connect plug to power source

outlet until all assembly steps are

complete and you have read and

understood the safety and operation

instructions. Do not operate vac

with any parts damaged or missing.

WARNING: To reduce the risk of

personal injury or damage to vac be

sure to keep hands, fingers, or any

other foreign objects out of the

center opening when assembling

the float .

ilter Nut

Filter Plate

Filter

Threaded Stud

Filter Cage

Slots (3)

Filter Nut

Lever

THIS SIDE

OWARD LID

Filter Cage

Tabs (3)

Float

Solid End

Slots (3)

Filter Cage

Tabs (3)

Slots (3)

Power

Assembly

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 5

. Line up vacuum port in top assembly

with drain cap located on the front of

the drum.

2. Place lid on top of drum with the drum

latches snug against the drum

channel.

3. Be sure lid completely covers the top

of the drum so leakage does not

occur.

4. Push down on top of the drum latch

areas to cause the flexible locking

tabs to hook onto the drum lip of the

channel.

5. Make sure that the locking tabs are

snapped in place to prevent the lid

from coming off. (See inset).

Your new Wet/Dry Vac is ready for use.

Wet/Dry Vac Assembly

Drum

Out

Flexible

Locking Tab

Drum

Channel

Top

Assembly

Push

Down

Pull Out

Flexible

Locking

Tab

Push

Down

Pull Out

Flexible

Locking

Tab

Cord Storage

Simply, wrap the power cord around the

power head and snap the connector on

the plug to a wrap of the cord.

Inser

t Hose

Insert the push button end of the “Tug-a-

Long” hose into the inlet of the vac. The

hose should snap into place. To remove

the hose from the vac, press the release

button in the hose assembly and pull the

hose out of the vac inlet, as shown.

Release Button

Pull Handle

Caster

Drain

Cap

Caster Feet

w/Accessory Storage

Drum

Power

Cord

Cord Wrap

Area

Blower

Port

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 6

Operation

o reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

OFF

After you plug the power cord into the

outlet, turn the unit on by pushing the

switch from position "O" to position "l". The

symbols used on the switch actuator are

international "On & Off" symbols. "O" is the

symbol for "OFF" and "l" is the symbol for

"ON".

. Slide extension wands and acces-

ories over the rings on the caster

feet.

2. To remove wands and accessories,

lightly rotate and pull upward.

3. Accessories may also be stored in the

rings provided on lid.

To Store Your Accessories

Utility Nozzle

Car Nozzle

WARNING: To reduce the risk of fire, explosion, or damage to Vac:

• Do not leave Vac running while unattended - you may fail to notice important signs indicating

abnormal operation such as loss of suction, debris/liquid exiting exhaust, or abnormal motor

noises. Immediately stop using Vac if you notice these signs.

• Do not leave Vac plugged-in when not in use.

• Do not continue running when float has cut off suction.

• Do not operate Vac in areas with flammable gases, vapors or explosive dust in the air.

Sparks inside the motor can ignite airborne flammables. Flammable gases and vapors

include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, or aerosol

sprays. Flammable dusts include: coal, magnesium, aluminum, grain, or gun powder.

• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.

• Do not use vac as a sprayer.

WARNING: To reduce the risk of electric shock or injury:

• Do not expose to rain or allow liquid to enter motor compartment. Store indoors.

• Do not handle plug, switch, or vac with wet hands.

• Do not service Vac while it is plugged-in. If your Vac is not working as it should, has missing

parts, has been dropped, damaged, left outdoors, or dropped into water, return it to an

independent service center or call customer service.

• When using an extension cord, use only outdoor-rated cords that are in good condition.

Do not allow the connection to come into contact with liquid.

• Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 7

Operation (continued)

Utility Nozzle - General purpose nozzle for

most vacuuming applications.

Car Nozzle - Dry pickup nozzle for car

interiors and most upholstery cleaning.

Wet Nozzle - Used for wet pickup on

smooth surfaces to pick up liquid and dry

the surface in one stroke.

Extension Wands - These wands can be

connected together and provides

additional length for more reach.

Hose - Provides transfer of vacuum or

blowing capability to work site. Provides

the means of attaching extension wands

and nozzles.

Familiarize yourself with the accessories

included with the vac. Each accessory may

be used in various ways for vacuuming

and blowing debris. Here is a list of the

accessories and their uses.

WARNING: To reduce the risk of

fire or electric shock, do not run vac

unattended.

WARNING: To reduce the risk of

injury from accidental starting,

unplug power cord before emptying

the drum.

Emptying the Drum

Vacuuming Liquids

1. When picking up small amounts of

liquid the filter may be left in place.

2. When picking up large amounts of

liquid we recommend that the filter be

removed. If the filter is not removed, it

will become saturated and misting may

appear in the exhaust.

3. When the liquid in the drum reaches a

predetermined level, the float

mechanism will rise automatically to cut

off air-flow. You will know that the float

has risen because vac airflow ceases

and the motor noise will become higher

in pitch, due to increased motor speed.

When this happens, turn off the vac,

unplug the power cord, and empty the

drum.

4. After using the vac to pick up liquids, the

filter must be dried to avoid possible

mildew and damage to the filter.

IMPORTANT: To reduce the risk of

damage to the vac, do not run motor with

float in raised position.

1. The vac comes equipped with a drain

for easy emptying of liquids. Simply

unscrew the drain cap and lift the

opposite side slightly to empty the

drum.

2. Another option is to remove the lid. Pull

the flexible latches outward on each

side of the lid to release from the drum.

3. While holding the latches out, lift the

top assembly up and away from the

drum.

4. Lay top assembly upside down on a

clean area while emptying drum or

changing filter.

Vacuuming Dry Materials

1. The filter must always be in correct

position at all times to avoid leaks and

possible damage to vac.

2. Your using your vac to pick up very fine

dust, it will be necessary for you to

empty the drum and clean the filter at

more frequent intervals to maintain

peak vac performance.

NOTE: A dry filter is necessary to pick up

dry material. If you use your vac to pick

up material when the filter is wet, the filter

will clog quickly and be very difficult to

clean.

3. If your filter is wet but you need to use

the vac to pick up dry material, you can

quickly dry the filter by running the vac

without hose attached for about

10 minutes. The clean air rushing

through the vac will help dry the filter.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 8

1. Locate blowing port of your Wet/Dry

Vac.

. Insert Tug-A-Long end of hose into the

blowing port of the vac.

3. (Optional) Attach extension wand to

swivel end of hose, then place a car

nozzle on the wand.

4. Turn vac on and you are ready to use

your vac as a blower.

Swivel

End of

Hose

Tug-A-Long

Hose

Extension

Wand

(optional)

Car

Nozzle

(optional)

Blowing

Port

WARNING: To reduce the risk of

back injury or falls, do not lift a vac

heavy with liquid or debris. Scoop

or drain enough contents out to

make the vac light enough to lift

comfortably.

Cord Maintenance

When vacuuming is complete, unplug the

cord and wrap it around the motor cover.

Moving the Wet/Dry Vac

Should it become necessary to pick the

vac up to move it, the handles on the

sides of the dust drum are used to lift. To

maneuver the vac, the pull handle above

the inlet should be used.

Blowing Feature

Your Wet/Dry Vac features “Full Blowing”.

It can blow sawdust and other debris.

Follow the steps below to use your vac

as a blower.

WARNING: Always wear safety

eyewear complying with ANSI Z87.1

(or in Canada, CSA Z94.3) before

using as a blower.

CAUTION: Wear a dust mask if

blowing creates dust which might

be inhaled.

UTION:

o reduce the risk of

hearing dama

e wear ear protectors

when using the vac/blower for

xtended hour

s or when using in a

noisy area.

WARNING: To reduce the risk of

injury to bystanders, keep them

clear of blowing debris.

5. Dump the drum contents into the

proper waste disposal container.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 9

Cleaning A Dry Filter

1. Some removal of dry debris can be

accomplished without removing the

filter from the vac. Slap your hand on

top of the lid while the vac is turned

off.

2. For best cleaning results due to

accumulated dust, clean the filter in an

open area. Cleaning SHOULD be

done outdoors and not in the living

quarters.

3. After filter removal from vac, remove

the dry debris by gently tapping filter

against the inside wall of your dust

drum. The debris will loosen and fall.

4. For thorough cleaning of dry filter with

fine dust (no debris), run water

through it as described under

"Cleaning A Wet Filter"

Cleaning A Wet Filter

After filter is removed, run water through

the filter from a hose or spigot. Take care

that water pressure from the hose is not

strong enough to damage filter.

Remember: To dry a filter quickly, reinstall

the filter on the vac and allow the unit to

run for approximately 10 minutes. The

clean air rushing through the filter will dry it.

Installation

Refer to page 5 "Replacement Filter

Assembly" Section of this manual.

Allow the filter to dry before reinstalling

and storing the vac.

Maintenance

WARNING: To reduce the risk of

injury from accidental starting,

unplug power cord before changing

or cleaning filter.

NOTE:

The filter is made of high quality

paper designed to stop very small

particles of dust. The filter can be used

for dry pick up or small amounts of liquid.

Handle the filter carefully when removing

to clean or installing it. Creases in the

filter pleats may occur from installation

but will not affect the performance of the

filter.

Filter Cleaning

Your filter should be cleaned often to

maintain peak vac performance.

Be sure to dry the filter before storing or

picking up dry debris.

IMPORTANT: After cleaning, check the

filter for tears or small holes. Do not use

a filter with holes or tears in it. Even a

small hole can cause a lot of dust to

come out of your vac. Replace it

immediately.

Filter Removal

To remove the filter for cleaning or

replacement, unscrew the filter nut from

the filter cage and lift off filter and filter

plate .

Filter

WARNING: Do not remove the

filter cage and float. The float

prevents water from entering the

impeller and damaging the motor.

The cage prevents fingers from

touc

hing the mo

ving impeller.

IMPORTANT:

To avoid damage to the

blower wheel and motor, always reinstall

the filter before using the vac for dry

material pick-up.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 10

Cleaning and Disinfecting the

Wet/Dry Vac

o keep your Wet/Dry Vac looking its

best, clean the outside with a cloth

dampened with warm water and mild

soap.

To clean the drum:

1. Dump debris out.

2. Wash drum thoroughly with warm

water and mild soap.

3. Wipe out with dry cloth.

Before prolonged storage or as needed

(i.e.; waste water pick up) the drum

should be disinfected.

To disinfect the drum:

1. Pour 1 gallon of water and 1 teaspoon

chlorine bleach into the drum.

2. Let solution stand for 20 minutes,

carefully swishing every few minutes,

making sure to wet all inside surfaces

of the drum.

3. Empty drum after 20 minutes. Rinse

with water until bleach smell is gone.

Allow drum to dry completely before

sealing the motor on the drum.

Storage

efore storing your vac, the dust drum

should be emptied and cleaned. The cord

should be wrapped around the unit and

the hose should be stored as described

in this manual. Accessories should be

kept in the same area as the vac so they

can be readily available. The vac should

be stored indoors.

Casters

If your casters are noisy, you may put a

drop of oil on the roller shaft to make

them quieter.

WARNING: To assure product

SAFETY and RELIABILITY, repairs

and adjustments should be

performed by Authorized Service

Centers, always using RIDGID

replacement parts.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 11

Key 12 Gallon

No. Part No. Description

1 813213 Toggle Switch

2 820563-4 Screw, Pan Hd. Ty. “AB” 10 x 3/4 Ser.

3 829692 Collector Assembly

4 509488 Float

5 823201-1 Filter Cage

6 826817 Nut, Hex Flange 5/16-18

7 15534-1 Washer

8 818413-2 Blower Wheel

9 818961 Spacer

10 820563-5 Screw, Pan Hd. Ty. “AB” 10 x 1-1/4 Ser.

11 VF4000 Filter

12 73317 Filter Plate

13 73316 Filter Nut

14 73185 Drain Cap

15 828833 Caster Foot w/Storage

16 331605 Caster

17 VT2509 Utility Nozzle

VT2503 Car Nozzle

19 VT2510 Wet Nozzle

20 VT2508 Extension Wands

21 826356-1 Hose Assembly (Includes Key Nos. 22 thru 24)

22 826355-1 Spring Tab

826354 End Hose Interlock

24 815096 Adapter Hose

25 SP6663 Operator’s Manual

WARNING

SERVICING OF DOUBLE-INSULATED WET/DRY VAC

In a double-insulated Wet/Dry Vac, two systems of insulation are provided

instead of grounding. No grounding means is provided on a double-insulated

appliance, nor should a means for grounding be added. Servicing a double-

insulated Wet/Dry Vac requires extreme care and knowledge of the system,

and should be done only by qualified service personnel. Replacement parts

for a double-insulated Wet/Dry Vac must be identical to the parts they replace.

Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE

INSULATED" and the symbol (square within a square) may also be

marked on the appliance.

To reduce the risk of injury from electrical shock, unplug power cord before

servicing the electrical parts of the Wet/Dry Vac.

Repair Parts

12 U.S. Gallons Wet/Dry Vac

Model Number WD12500

RIDGID parts are available on-line at www.ridgidparts.com

Always order by Part Number - Not by Key Number

* Standard Hardware Item - May Be Purchased Locally

† These replacement parts are available where you purchased your vac.

†

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 12

12 U.S. Gallons Wet/Dry Vac

Model Number WD12500

RIDGID parts are available on-line at www.ridgidparts.com

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 13

Part No. SP6663

Form No. SP6663-2

Printed in Mexico 04/08

QUESTIONS OR COMMENTS? CALL

1-800-4-RIDGID (1-800-474-3443)

www.ridgidvacs.com

Please have your Model Number and Serial Number on hand when calling.

Professional Tools

Emerson Tool Company

A Division Of

Emerson Electric Co.

Stock No. WD1250

Model No. WD12500

Serial Number

Model and serial numbers may be found next to the blowing port. You should record

both model and serial numbers in a safe place for future use.

c 2008 Emerson

• What is covered

RIDGID

Wet/Dry Vacs are warranted to be free of defects in workmanship and material.

• How long coverage lasts

This warranty lasts for the lifetime of the RIDGID

Wet/Dry Vac.

• How to obtain service

To obtain the benefit of this warranty, please call 1-800-4-RIDGID (1-800-474-3443).

• What we will do to correct problems

Warranted Wet/Dry Vacs will be repaired or replaced, at Ridge Tool Company's option, and returned

at no charge; or, if after three attempts to repair or replace during the warranty period the Wet/Dry

Vac is still defective, you can elect to receive a full refund of your purchase price.

• What is not covered

Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. RIDGE

TOOL COMPANY SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES.

• How local laws relate to the warranty

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you

may also have other rights which vary from state to state, province to province, or country to

country.

• No other express warranty applies

This FULL LIFETIME WARRANTY is the sole and exclusive warranty for RIDGID

Wet/Dry Vacs.

No employee, agent, dealer, or other person is authorized to alter this warranty or make any other

warranty on behalf of Ridge Tool Company.

SP6663-2 12 GALLON.qxd 4/21/08 10:40 AM Page 14

Page is loading ...

RIDGID WD1250 User manual

Brand: RIDGID

Model: WD1250

Category: Vacuum cleaners

Type: User manual

Download PDF

report

in other languages

español: RIDGID WD1250 Manual de usuario

RIDGID WD1250 User manual

RIDGID WD1250 User manual

in other languages

Related papers

Other documents